FORD WSS-M1H1108-A-2016 FABRIC FAIRLANE PATTERN FLAT WOVEN TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 05 N Status No longer used D. Murtonen, NA 2007 08 31 Activated M. Dumitrescu Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, FAIRLANE PATTERN, FLAT WOVEN WSS-M1H1108-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The mate

2、rial defined by this specification is a FAIRLANE pattern, flat Jacquard woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric, bolster application for 2009 D471 and P415. 3. REQU

3、IREMENTS310 Material specification requirements are to be used for initial qualification of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers mu

4、st conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 310 ends/10 cm Fill 200 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 431 g/m2 3.3 CO

5、MPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100% Polyester Backcoating Acrylic latex ENGINEERING MATERIAL SPECIFICATION WSS-M1H1108-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f34 (false twist semi-dull polyester) x 3 Fill 16.7 tex f68 (textured, semi-dull polyester, sol dye) x 3 3.5 METHOD OF DYEING piece dye/solution dye 3.6 FINISHING OPERATIONS woven, wash, jet scour, scutch, dye, backcoated