FORD WSS-M1H1119-A-2007 FABRIC ROSARIO PATTERN WOVEN TO BE USED WITH FORD WSS-M99P1111-A 《罗萨里奥市（ROSARIO）风景图案的机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 11 21 Activated L. Neves Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ROSARIO PATTERN, WOVEN WSS-M1H1119-A 1. SCOPE The material defined by this specification is a woven polyester fabri

2、c. 2. APPLICATION This specification was released originally for material used as an interior trim fabric (seats) for Ranger 2009 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQ

3、UIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 27.0 yarn/cm Fill 19.5 yarn/cm 3.2.2 Fabric Weight, +

4、/- 5% tolerance (FLTM BN 106-01) Seat (laminated to 5 mm foam) 168 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam - Seat PUR/Polyether D28 5 mm Backing Fabric (Seats only) 100% PES 47 g/m ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1119-A Printed copies are uncontrolled Copyright 2007, For

5、d Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 600 dtex, f144, Semi dull, Round, Air Textured, Polyester Fill 330 dtex, f 68, Semi dull, Round, False twist Textured, Polyester 2.7 Nm, Semi dull, Round, Flock Yarn, Polyester 3.5 METHOD OF DYEING Warp Yarn Dyed Fill Ya

6、rn/Solution Dyed 3.6 FINISHING OPERATIONS Heat set, lamination 3.7 THICKNESS, mm, range (ASTM D 1777) Seat (laminated to 5 mm foam + backing fabric) 4.5 - 5.5 mm 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, laminated, %, range (SAE J855) Warp 4.5 6.5 Fill 6.5 9.0 3.9 FLAMMABILITY (ISO 3795/SAE J369) B

7、urn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.