FORD WSS-M1H1128-A-2015 FABRIC SPORT CORD PATTERN WARP KNIT TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver 2 2015 10 26 N Status No future usage D. Murtonen, NA 2008 06 25 Revised Updated the Title & 1 M. Dumitrescu, FNA 2008 03 19 Activated M. Dumitrescu Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SPORT CORD PATTERN, WAR

2、P KNIT WSS-M1H1128-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a Sport Cord pattern, 6 bars, 44 Gauge, Double Needle bar, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an i

3、nterior trim fabric for 2010 S197 seat insert. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Company

4、s Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 94.5 wales/10 cm Courses 129 courses/10 cm 3.2.2 Fabric Weight, +/- 5%, g/m2 (FLTM BN 106-01) Face w/ no Backcoat 570 Laminated to 3 mm foam 658 3.3 COM

5、POSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backcoat No backcoat ENGINEERING MATERIAL SPECIFICATION WSS-M1H1128-A Copyright 2015 Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 16.7 tex f36 x 1 (textured yarn) Middle 3.33 texf1 (monofilament) Back 11.1 tex f34 (textured yarn) 4th 11.1 texf36 (textured yarn) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, Dye, Heat set, Tenter dry, Inspect