1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 0 2009 01 06 Activated V. Demarchi, FSAO Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 2 FABRIC, TWILL BRAZIL PATTERN, WOVEN 295 325 g/m WSS-M1H1145-A1 FABRIC, TWILL BRAZIL PATTERN, WOVEN 315 411
2、g/m WSS-M1H1145-A2 1. SCOPE The material defined by these specifications is a dobby woven Polyester fabric. 2. APPLICATION These specifications were released originally for material used as an interior trim fabric for Ranger 2009 Model Year, for FSAO use only. 3. REQUIREMENTS In addition to the requ
3、irements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CON
4、STRUCTION 3.2.1 Fabric Count, range (ASTM D 3775) A1 A2 Warp 19.0 21.0 18.0 20.0 yarn/cm Weft 13.5 15.5 16.0 18.0 yarn/cm 3.2.2 Fabric Weight, range A1 A2 (FLTM BN 106-01) 213 236 207 253 g/m A1 A2 Laminated to 3 mm foam 295 325 315 - 411 g/m A1 A2 Backing Fabric (Seats only) 30 g/m (+/- 6%) 53 g/m
5、(+/- 10%) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Backing Fabric (Seats only) 100% Pes ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1145-A1/A2 Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) A1 A2 Warp 525 dtex, Air
6、 Text., 600 dtex, f142, Textured, Round, Semi Dull Weft 825 dtex, Air Text., 500 dtex, f132, Air Text, Round, Semi Dull Round, Semi Dull 3.5 METHOD OF DYEING A1 A2 Warp Yarn Dyed Solution Dyed Weft Yarn Dyed Yarn dyed 3.6 FINISHING OPERATIONS Shear, dye, dry,heat set Heat set, lamination 3.7 TRIMMAB
7、ILITY PROPERTIES 3.7.1 Stretch, %, range (SAE J855) Seat Warp 4.0 - 10.0% A1 A2 Weft 4.0 - 10.0% 2.0 8.0% Door Panel Warp 4.0 - 10.0% Weft 4.0 - 10.0% 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1