1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2015 02 03 Released M. Montgomery, EU Controlled document at www.MATS Copyright 2015 Ford Global Technologies, Inc. Page 1 of 2 FABRIC, ETON PATTERN, FLAT WOVEN WSS-M1H1190-A1 1. SCOPE The material defined by this specification is a wo
2、ven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C346RS 2015 insert for Europe production. The fabric was approved stitched trilaminated with foam and backing fabric/scrim. 3. REQUIREMENTS 3.1 STANDARD REQUIRE
3、MENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.1.1 In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.2 FABRIC
4、CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 340 ends/10 cm Weft 345 picks/10 cm 3.2.2 Fabric Weight, +/-10 % tolerance (FLTM BN 106-01) Face fabric 265 g/m2 ENGINEERING MATERIAL SPECIFICATION WSS-M1H1190-A1 Copyright 2015, Ford Global Technologies, Inc. Page 2 of 2 3.3 COMP
5、OSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100% Polyester Backing fabric/scrim 100% Polyester 3.4 FABRIC YARN CONSTRUCTION (ASTM D 1244) Warp 167 dtex (textured polyester yarn) x 2 Weft 167 dtex (100% recycled textured polyester yarn) x 2 3.5 FABRIC METHOD OF DYEING Piece
6、 dye 3.6 FABRIC FINISHING OPERATIONS Scour, dye, dry, set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1