FORD WSS-M1H1200-A-2015 FABRIC GRIDLOCK PATTERN FLAT WOVEN 25% MINIMUM PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 1 2015 10 26 N Status No future usage D. Murtonen, NA 2009 01 07 Activated M. Dumitrescu, FNA Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, GRIDLOCK PATTERN, FLAT WOVEN WSS-M1H1200-A 25% MINIMUM PIR CONTENT NOT TO BE

2、USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a GRIDLOCK pattern, Dobby, flat woven bodycloth of good quality and uniform composition. The fabric has min 25% PIR (Post Industrial Recycled) yarn content and it is backcoated. 2. APPLICATION This specification was released

3、originally for material used as a seat fabric, insert application for 2011 P473 F 250/350/450. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part pro

4、ducers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 330 ends/10 cm Fill 135 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 410 g/

5、m2 Backcoat 35 g/m2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 85% Polyester, 15% Nylon Backcoating Acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H1200-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 65 tex f

6、48 (air texture 100% polyester) x 1 Fill 172 tex (flock 100% PA 6.6) x 1 85 tex f192 (air texture 100% PIR polyester yarn) x 1 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.