FORD WSS-M1H1201-A-2009 FABRIC DELHI PATTERN WARP KNITTED TO BE USED WITH FORD WSS-M99P1111-A 《DELHI图案的经编针织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 0 2009 02 20 Activated V. Demarchi, FSAO Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DELHI PATTERN, WARP KNITTED WSS-M1H1201-A 1. SCOPE The material defined by this specification is a

2、warp knitted polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for Seat bolster and Door Trim for BV256 2011MY, BV226 2010MY, B402. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all require

3、ments of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wa

4、rp 12.0 yarn/cm Fill 20.0 yarn/cm 3.2.2 Fabric Weight, +/- 10%, g/m 270 (face fabric) (FLTM BN 106-01) Face w/no Back coat 243 297 Laminated* 348 452 * 2 mm foam thickness + backing fabric 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backing Fabric (Se

5、ats only) 100% Polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1201-A Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 50 dtex, f24, Semi dull, Round, Flat, Polyester 130 dtex, f48, Semi dull, Round, Textured, Polye

6、ster 130 dtex, f34, Semi dull, Round, Textured, Polyester 3.5 METHOD OF DYEING Solution Dye 3.6 FINISHING OPERATIONS Washing, Heat-Setting 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only 4.2 This specification belongs to BV226, BV256 and B402 Program for South America.