FORD WSS-M1H1210-A-2016 FABRIC CORK PATTERN FLAT WOVEN TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 16 N Status No replacement named D. Murtonen, NA 2009 05 28 Activated V. Demarchi, FSAO Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, CORK PATTERN, FLAT WOVEN WSS-M1H1210-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE Th

2、e material defined by this specification is a flat woven polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2011 BV256 Seat. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requir

3、ements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) W

4、arp 31.0 yarn/cm Fill 20.0 yarn/cm 3.2.2 Fabric Weight, +/- 10%, g/m 237 (face fabric) (FLTM BN 106-01) Laminated* 348 426 * 3 mm foam thickness + backing fabric 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backing Fabric (Seats only) 100% Polyester EN

5、GINEERING MATERIAL SPECIFICATION WSS-M1H1210-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 2 x 167 dtex, f 48, Semi dull, False Twist Textured, Polyester. Fill 1 2 x 290 dtex, f 96, Semi dull, False Twist Textured, Polyester. Fill 2 2 x 167 dtex

6、, f 48, Semi dull, False Twist Textured, Polyester. Fill 3 450 dtex (167/48-2), Semi dull, Air Textured, Polyester. 3.5 METHOD OF DYEING Warp, Fill 1 e 2 = PACKAGE DYED Fill 3 = DOPE DYED 3.6 FINISHING OPERATIONS Yarn Dyeing, Heat-Setting Warping, Weaving, Finishing and Lamination 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.