FORD WSS-M1H1215-A-2010 FABRIC ACAPULCO PATTERN JACQUARD WOVEN TO BE USED WITH FORD WSS-M99P1111-A 《ACAPULCO图案的提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 01 13 Activated S. Santana - FSAOPrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ACAPULCO PATTERN, JACQUARD WOVEN WSS-M1H1215-A 1. SCOPE The material defined by this specification is a jac

2、quard woven polyester fabric applied to seats. The fabric has been developed using a trilaminate construction. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for BV256 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, t

3、he fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Co

4、unt, +/- 5% tolerance (ASTM D 3775) Warp 31.1 yarn/cm Fill 20.9 yarn/cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Seat (laminated to 4,0mm foam) 399 - 441 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam PUR/Polyester Backing Fabric (Seats only) 100% Polyester ENGINEERING MAT

5、ERIAL SPECIFICATIONWSS-M1H1215-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 450 dtex, f48-2, Semi Dull, Round, Air Textured Polyester Fill 1 500 dtex, f72-2, Semi Dull, Round, False Twisted Textured Polyester Fil

6、l 2 340 dtex, f48-2, Semi Dull, Round, False Twisted Textured Polyester Fill 3 450 dtex, f48-2, Semi Dull, Round, False Twisted Textured Polyester 3.5 METHOD OF DYEING Warp Dope Dyed Fill 1 Package Dyed Fill 2 Package Dyed Fill 3 Dope Dyed 3.6 FINISHING OPERATIONS Washing Heat Setting Lamination 4.

7、GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.