FORD WSS-M1H1218-A-2010 FABRIC ISTAMBUL PATTERN WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《ISTAMBUL模式提花编织的非层压织物 与福特WSS-M99P1111-A 一起使用》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 0 2010 10 19 Activated M. Fontes, FSAO Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ISTAMBUL PATTERN, WOVEN JACQUARD, UNLAMINATED WSS-M1H1218-A 1. SCOPE The material defined by this spe

2、cification is a jacquard woven polyester fabric applied to curtain. The fabric has been developed using a face fabric construction. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for H534 Project Model Year. 3. REQUIREMENTS In addition to the r

3、equirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. The Mace Snagging test is not required for this application. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requir

4、ements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 38,0 yarn/cm Fill 24,0 yarn/cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) Curtain (face fabric) 233 - 285 g/m 3.3 COMPOSITION (ASTM D 629) Tolerance as speci

5、fied in WSS-M8P18-A1/A4 Fabric 100% Polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1218-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 390 dtex, Semi Dull, Round, False Twist Polyester Fill 390 dtex, Semi Dull,

6、 Round, False Twist Polyester 3.5 METHOD OF DYEING Warp Solution Dyed Fill Yarn Dyed 3.6 FINISHING OPERATIONS Heat Setting 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.