FORD WSS-M1H737-A-2009 FABRIC CEDAR PATTERN WOVEN VELOUR WITH STRETCH TO BE USED WITH FORD WSS-M99P1111-A 《雪松（CEDAR）图案的高伸展性丝绒机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 01 06 N-STATUS No Replacement B. Haggart, FNA 2003 03 21 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1998 05 01 Activated L. Daniv-Zarewych Printed copies are uncontrolled Page

2、 1 of 2 Copyright 2009, Ford Global Technologies, Inc. FABRIC, CEDAR PATTERN, WOVEN VELOUR WITH WSS-M1H737-A STRETCH NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a stretch woven velour velflex pattern of good quality and uniform composition. 2. APPLICATION Thi

3、s specification was released originally for material used for full face feature fabric on the as an interior trim fabric for the 1999 MY Windstar G, GL, and LX trim levels. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric/laminate shall meet all requirements of WSS-M8P18-A1/

4、A2/A3/A4. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Wales 21.8 wales/10 cm Courses

5、13.0 courses/10 cm 3.4.2 Fabric Weight, range (FLTM BN 106-01) 640.3 g/m23.5 COMPOSITION (ASTM D 629) Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H737-A Page 2 of 2 Copyright 2009, Ford Global Technologies, Inc. 3.6 CONSTRUCTION (ASTM D 629) Fabric 100 % Polyester Face Finsh N/A

6、Bkoatg Acrylic 3.7 YARN CONSTRUCTION (ASTM D 1244) Warp Pile 29.5 tex (solution dyed polyester, 2.8 dtx/filamnt)x2 27.8 tex, f100 (T726 dull textured polyester) x 2 Back 16.7 tex f33 (solution dyed textured strech polyester) x3 Fill 16.7 tex f33 (solution dyed textured strech polyester) x3 3.8 METHO

7、D OF DYEING Package Dye 3.9 FINISHED OPERATIONS Brush, Shear, Backcoat, Dry, Brush, and Shear 3.10 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.