FORD WSS-M1H817-A2-2003 FABRIC VISION PATTERN WOVEN SEATBACKS AND SIDE FACINGS TO BE USED WITH FORD WSS-M99P1111-A 《座椅背面和侧面用美景图案的机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 02 26 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.9,3.10, 4 deleted 2000 08 17 Revised Rev. para 1 M. Dumitrescu 2000 08 04 Activated M. Dumitrescu Printed copies are uncontrolled Page 1 of 3 Copy

2、right 2003, Ford Global Technologies, Inc. FABRIC, VISION PATTERN, WOVEN, WSS-M1H817-A2 SEATBACKS AND SIDE FACINGS 1. SCOPE The material defined by this specification is a coated, textured tri-laminate polyester Vision pattern hopsack flat woven bodycloth of good quality and uniform composition. 2.

3、APPLICATION This specification was released originally for material used as an interior trim fabric used only for seatbacks and seat side facings. It was released to replace the vinyl and the nonwoven carpet on the Ford Truck seats. 3. REQUIREMENTS In addition to the requirements listed herein, the

4、fabric shall meet all requirements of : WSS-M8P18-A1/A4, with an exception to Section 3.8.3 Seam Strength will be 350 N, min. This material will be used only on Class C surfaces: seatbacks, and facings (please refer to Figures 1 and 2). The material will be backcoated and laminated. 3.0 STANDARD REQ

5、UIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 281 ends/10 cm Fill 196 picks/10 cm 3.4.2 Fabric Wei

6、ght, +/- 3 % tolerance (FLTM BN 106-01) Face fabric w/backcoat 204 g/m2 Laminated with 3 mm foam 335 g/m2ENGINEERING MATERIAL SPECIFICATION WSS-M1H817-A2 Page 2 of 3 Copyright 2003, Ford Global Technologies, Inc. 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Poly

7、ester Backcoating 100% EVA 3.6 YARN CONSTRUCTION, Tex (ASTM D 1244) Warp 33.3 tex (100% semi- dull polyester, 2 ply false twist extured)Fill 33.3 tex (100% semi- dull polyester, 2 ply false twist extured)3.7 METHOD OF DYEING Piece Dyed 3.8 FINISHING OPERATIONS Scour, Piece dye, Dry, Coat, Inspect, Laminate ENGINEERING MATERIAL SPECIFICATION WSS-M1H817-A2 Page 3 of 3 Copyright 2003, Ford Global Technologies, Inc. Figure 1 Figure 2