FORD WSS-M1H818-A-2015 FABRIC PLAIN WEAVE PATTERN WOVEN TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2015 12 09 N Status No replacement D. Murtonen, NA 2003 02 26 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 1999 11 09 Released L. Daniv-Zarewych Page 1 of 2 Copyright 2015, Ford Glob

2、al Technologies, Inc. FABRIC, PLAIN WEAVE PATTERN, WOVEN WSS-M1H818-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a nylon flat woven body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material use

3、d as an interior trim fabric for Console Bags for 1999 Explorer/Ranger. The fabric is backcoated, but not laminated. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. The fabric is to be used only for a console ba

4、g application. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 124 ends/10 cm Fill 1

5、31 picks/10 cm 3.4.2 Fabric Weight, range 302.6 - 334.5 g/m2 (FLTM BN 106-01) 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100 % Nylon Backcoating Polyurethane ENGINEERING MATERIAL SPECIFICATION WSS-M1H818-A Page 2 of 2 Copyright 2015, Ford Global Technologies, Inc.

6、3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 94 tex, 136 f (T-6 HT bright nylon) Fill 94 tex, 136 f (T-6 HT bright nylon) 3.7 METHOD OF DYEING Solution Dyed 3.8 FINISHING OPERATIONS Scour, Heatset, Dip-pad FR treatment, Coat 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not req

7、uired on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.