FORD WSS-M1H872-A-2003 FABRIC TRIA PATTERN WOVEN JACQUARD UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《TRIA图案的不分层提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 04 16 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.10, 3.11, 4 deleted 2001 09 27 Activated N. J. Komatsu Printed copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, Inc. F

2、ABRIC, TRIA PATTERN, WOVEN JACQUARD, WSS-M1H872-A UNLAMINATED 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2003 model year. 3. REQUI

3、REMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and p

4、art producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 275 ends/10 cm Weft 158 picks/10 cm 3.4.2 Fabric Weight, range (FLTM BN 106-01) 240 - 280 g/m23.5 COMPOSITION (

5、ASTM D 629) Fabric 100% polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H872-A Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp 520 570 dtex f132-156 (air texturised, semi-dull, round) Weft 465 - 505 dtex f92 116 (air texturised, bright, trilobal

6、) 3.7 METHOD OF DYEING Yarn, dyed or as approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.