FORD WSS-M1H886-A-2003 FABRIC BOARD PATTERN WARP KNIT TO BE USED WITH FORD WSS-M99P1111-A 《织物 经编针织BOARD花纹(和FORD WSS-M99P1111-A一起使用)》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2003 04 17 Revised Para 3.0 inserted; Para 3.1, 3.2, 3.3, 3.9, 4 deleted 2002 03 22 Activated M. Dumitrescu Printed copies are uncontrolled Page 1 of 2 Copyright 2003, Ford Global Technologies, Inc. FABRIC,

2、BOARD PATTERN, WARP KNIT WSS-M1H886-A 1. SCOPE The material defined by this specification is a BOARD PATTERN, a 28 Gauge, flat warp knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for the

3、 P-150 Mazda 2004 seat bolster. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requ

4、irements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 110 wales/10 cm Courses 177 courses/ 10 cm 3.4.2 Fabric Weight, range, g/m2(FLTM BN 106-01) Laminated * Face w/no Backcoat 433.5 -479 321.3-355 * 3 mm foam thickness E

5、NGINEERING MATERIAL SPECIFICATION WSS-M1H886-A Page 2 of 2 Copyright 2003, Ford Global Technologies, Inc. 3.5 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester 3.6 YARN CONSTRUCTION (ASTM D 1244) Face 16.7 tex f48 (Natural Polyester) Middle 16.7 tex f48 (Natural Polyester) Back 16.7 tex f48 (Natural Polyester) 16.7 tex f48 (Natural Polyester) 3.7 METHOD OF DYEING Disperse Piece Dye 3.8 FINISHING OPERATIONS Wash, Preset, Dye, Heat Set, Inspect