FORD WSS-M1H905-A-2008 FABRIC MIDWAY PATTERN WARP KNITTED UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《MIDWAY图案的不分层经编针织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 05 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2004 07 12 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MIDWAY PATTERN, WARP KNITTED, WSS-M1H9

2、05-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a 2 bar 28 gauge warp knitted, simulated velour, polyester bodycloth. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2002 Model Year Mexic

3、o. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production

4、Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 140 wales/10 cm Courses 230 courses/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance 230 g/m2(FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244

5、) Pile 70 dN f36 (polyester, semi- dull, chemical fibers) Back 75 dN f36 (polyester, semi- dull, textured, chemical fibers) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H905-APrinted copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Piece dyed or as ap

6、proved by Materials Engineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.