FORD WSS-M1H926-A-2008 FABRIC CUPPER PATTERN WOVEN JACQUARD TO BE USED WITH FORD WSS-M99P1111-A 《CUPPER图案的提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 17 N-STATUS No Replacement B. Haggart, FNA 2003 02 25 Activated M. Dumitrescu Printed copies are uncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, CUPPER PATTERN, WOVEN

2、JACQUARD WSS-M1H926-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a CUPPER pattern, flat woven Jacquard bodycloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an insert of seat cover f

3、or PN96 in MEXICO. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Mat

4、erials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 165 ends/10 cm Fill 167 picks/10 cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Face Fabric 315-359 g/m2ENGINEERING MATERIAL SPECIFICATION WSS-M1H926-A Page 2 of 2 Copyright 2008, Ford Global Te

5、chnologies, Inc. 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 49%PP, 51% PET Backcoat Acrylic 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 66.7tex f128 (false twist PP sol dye) Fill 83.3tex f192 (air jet PET, sol dye) 3.5 METHOD OF DYEING Solution dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoating, heat set, inspection