FORD WSS-M1H927-A-2008 FABRIC STORM PATTERN WOVEN JACQUARD TO BE USED WITH FORD WSS-M99P1111-A 《暴雨（STORM）图案的提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2008 12 17 N-STATUS No Replacement B. Haggart, FNA 2003 02 25 Activated M. Dumitrescu Printed copies are uncontrolled Page 1 of 2 Copyright 2008, Ford Global Technologies, Inc. FABRIC, STORM PATTERN, WOVEN J

2、ACQUARD WSS-M1H927-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a STORM pattern, flat woven Jacquard bodycloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an insert of seat cover for

3、 PN96 in MEXICO. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Mater

4、ials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 165 ends/10 cm Fill 165 picks/10 cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Face Fabric 348-392 g/m2ENGINEERING MATERIAL SPECIFICATION WSS-M1H927-A Page 2 of 2 Copyright 2008, Ford Global Tech

5、nologies, Inc. 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 50%PP, 50%PET Backcoat Acrylic 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 66.7tex f128 (false twist PP, sol dye) Fill 125.5tex f204 (air jet PET, pack dye) 3.5 METHOD OF DYEING Package dye, solution 3.6 FINISHING OPERATIONS Warping, weaving, backcoating, heat set, inspection