FORD WSS-M1H937-A-2008 FABRIC DISCREET PLAIN DESIGN PILE KNITTED UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《DISCREET PLAIN设计的不分层长毛绒针织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 09 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2004 07 13 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DISCREET PLAIN DESIGN, PILE KNITTED, W

2、SS-M1H937-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a pile tricot warp knitted 28 gauge polyester face fabric. 2. APPLICATION This specification was released originally for material used for as an interior trim fabric for 2003 C195. 3. REQUIRE

3、MENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WS

4、S-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3887) Wales 100 wales/10 cm Courses 245 courses/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance 410 g/m2(FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Ground 160

5、 dtex f72 (polyester, fully drawn filament yarn, round, semi-dull) Pile 89 dtex f34 (polyester, texturized, round, Filament yarn, semi-dull) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H937-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Y

6、arn dyed or as approved by Materials Engineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.