1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 03 09 Revised Clause 3.4 weft change A. Harrison 2004 12 09 Revised Clause 3.2.1 tolerance changed N. J. Komatsu 2003 10 27 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 1 of 2
2、FABRIC, TICTOC PATTERN, WOVEN JACQUARD, WSS-M1H944-A UNLAMINATED 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for the 2002 Model Year. 3. REQUIREME
3、NTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-
4、M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 300 ends/10 cm Weft 155 picks/10 cm 3.2.2 Fabric Weight, range. (FLTM BN 106-01) 260 - 290g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H944-A Printed copies
5、 are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 540 dtex f136 (Polyester, air texturized, round, semi-dull) Weft 540 dtex f144 (Polyester, Bright, trilobal, air texturized) 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials
6、 Engineering 3.6 FINISHING OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1