1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 12 09 N-STATUS No Replacement L. Schmalz, FNA / M. Montgomery, FOE 2005 03 18 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, PIENO, PATTERN, WARP KNIT, WSS-M1H976-
2、A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a 4 bar 28 gauge warp knitted, simulated velour, polyester bodycloth. 2. APPLICATION WSS-M1H976-A is used for molded set headrests and also adhesive coated for use on inner door panels. 3. REQUIREMENTS
3、 In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements Ford Production Materials WSS-M99
4、P 1111-A. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 8% tolerance (ASTM D 3887) Wales 128 wales/10 cm Courses 200 courses/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 350 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester ENGINEERING MATERIAL SPECIFICATIONWSS-M1H976-A Print
5、ed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile 76 dtex f40-50 (polyester, flat twist, ribbon) Pile 76 dtex f20-40 (polyester, false twist, texturized) Back 76 dtex f20-30 (polyester, false twist, texturized) 3.5 METHOD OF
6、 DYEING Piece dyed and or as approved by Materials Engineering 3.8 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1