FORD WSS-M1H980-A-2005 FABRIC LUGANO MIDNIGHT BLACK PATTERN WARP KNITTED UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《卢加诺午夜黑（LUGANO MIDNIGHT BLACK）图案的不分层经编针织织物 与标准FORD WSS-M.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 01 21 Activated L. Neves Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 2 FABRIC, LUGANO MIDNIGHT BLACK PATTERN, WARP KNITTED, WSS-M1H980-A UNLAMINATED 1. SCOPE The material defined by this specifi

2、cation is a warp knitted polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2005 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as app

3、licable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Wales 140 wales/10cm Courses 220

4、 courses/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance 245 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile 70 dtex f36, Semi-Dull, Round, Textured Polyester Back 70 dtex f36, Semi-Dull, Round, Flat Polyester 3.5 METHOD OF DYEING Piece D

5、yed ENGINEERING MATERIAL SPECIFICATIONWSS-M1H980-A Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHING OPERATIONS Knit, Dye, Raise, Heat Set 3.7 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note: Not required on face fabric when us

6、ed as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.