FORD WSS-M2C910-A2-2009 OIL ENGINE ILSAC GF-2 INITIAL FILL SAE 10W-30 TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2C910-A1)《SAE 10W-30初始注入型LSAC GF-2发动机油 与标准FORD WSS-.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 11 N-STATUS No known use. No replacement named D. DiGregorio, NA 2004 06 01 Revised Para 3.0 inserted; para 3.1, 3.6 “NiL“ or Trace“ are not permissible) S _ _ _ _ _ P _ _ _ _ _ Zn _ _ _ _ _ Ba _ _ _ _ _ Ca _ _ _ _ _ Mg _ _ _ _ _ Na _

2、_ _ _ _ N _ _ _ _ _ B _ _ _ _ _ Cu _ _ _ _ _ Cl _ _ _ _ _ Sulfated Ash _ _ _ _ _ V. Tests Conducted _ _ _ _ _ Comments: _ _ _ _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C910-A1/A2Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 7 of 10 ILSAC GF-2

3、SAE 5W-30 Supplement A Page 4 of 5 Oil Company_ Date_ Product Name_ Product Code_ Specification Test Mfg. Physical/Chemical Properties Requirements Results Limits Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s 9.3-.001%) _ _ Signature_ Title_ ENGINEERING MATERIAL S

4、PECIFICATIONWSS-M2C910-A1/A2Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 8 of 10 ILSAC GF-2 SAE 10W-30 Supplement A Page 5 of 5 Oil Company_ Date_ Product Name_ Product Code_ Specification Test Mfg. Physical/Chemical Properties Requirements Results Limits Viscos

5、ity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s 9.3-.001%) _ _ Signature_ Title_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C910-A1/A2Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 9 of 10 ILSAC GF-2 SAE 5W-30 Supplement B Page 1 of 2 Oil

6、Company_ Date_ Product Name_ Product Code_ Blend Plant Location_ Quality Control Certification Approved Physical/Chemical Properties Limits Frequency Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s _ _ Viscosity at 40 C (ASTM D 445), mm2/s _ _ Density (ASTM D 1298),

7、 kg/L _ _ Viscosity at -25 C (ASTM D 5293), mPa.s _ _ Viscosity at -30 C (ASTM D 5293), mPa.s _ _ Low Temp. Pumping Viscosity at -30 C, mPa.s _ _ (ASTM D 4684) at -35 C, mPa.s _ _ Pour Point (ASTM D 97), C _ _ Stable Pour Point (SAE J300 App. B), C _ _ Gelation Index (ASTM D 5133) _ _ Flash Point (A

8、STM D 93), C _ _ Volatility Evap. Loss, 1 h at 250 C (CEC-L-40-T-8),% _ _ Dist. by GC at 371 C (ASTM D 5480), % _ _ Shear Stability (ASTM D 445), mm2/s at 100 C After ASTM D 3945 or CEC L-14A-78 _ _ After 10 h in “L-38“ test _ _ Viscosity at 150 C and 106 s-1 (ASTM D 4683 or CEC L-36T-84), mPa.s New

9、 Oil _ _ After ASTM D 3945 or CEC L-14A-78 _ _ Copper Corrosion (ASTM D 130, 3 h at 100 C) _ _ Filterability (FLTM BJ 124-1), % _ _ Water Tolerance (Modified FLTM BJ 124-01), % _ _ Foaming Sequence I, mL _ _ Sequence II, mL _ _ Sequence III, mL _ _ Sequence IV, mL _ _ TEOST Test (Method 33), mg _ _

10、JAMA Hot Tube Test (KES 07.803,if available), mg _ _ Total Acid Number (ASTM D 664), mg KOH/g _ _ Total Base Number (ASTM D 2896), mg KOH/g _ _ Sulfated Ash (ASTM D 874), % _ _ Phosphorus content, % _ _ Barium, % _ _ Nitrogen, % _ _ Boron, % _ _ Potassium, % _ _ Calcium, % _ _ Sodium, % _ _ Chlorine

11、, % _ _ Sulfur, % _ _ Copper, % _ _ Zinc, % _ _ Magnesium, % _ _ Other (.001%) _ _ Signature_ Title_ Materials Engineering Concurrence_ ENGINEERING MATERIAL SPECIFICATIONWSS-M2C910-A1/A2Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 10 of 10 ILSAC GF-2 SAE 10W-30

12、Supplement B Page 2 of 2 Oil Company_ Date_ Product Name_ Product Code_ Blend Plant Location_ Quality Control Certification Physical/Chemical Properties Approved Frequency Limts Viscosity at 150 C (ASTM D 445), mm2/s _ _ Viscosity at 100 C (ASTM D 445), mm2/s _ _ Viscosity at 40 C (ASTM D 445), mm2/

13、s _ _ Density (ASTM D 1298), kg/L _ _ Viscosity at -20 C (ASTM D 5293), mPa.s _ _ Viscosity at -25 C (ASTM D 5293), mPa.s _ _ Low Temp. Pumping Viscosity at -25 C, mPa.s _ _ (ASTM D 4684) at -30 C, mPa.s _ _ Pour Point (ASTM D 97), C _ _ Stable Pour Point (SAE J300 App. B), C _ _ Gelation Index (AST

14、M D 5133) _ _ Flash Point (ASTM D 93), C _ _ Volatility Evap. Loss, 1 h at 250 C (CEC-L-40-T-8),% _ _ Dist. by GC at 371 C (ASTM D 5480), % _ _ Shear Stability (ASTM D 445), mm2/s at 100 C After ASTM D 3945 or CEC L-14A-78 _ _ After 10 h in “L-38“ Test _ _ Viscosity at 150 C and 106 s-1 (ASTM D 4683

15、 or CEC L-36T-84), mPa.s New Oil _ _ After ASTM D 3945 or CEC L-14A-78 _ _ Copper Corrosion (ASTM D 130, 3 h at 100 C) _ _ Filterability (FLTM BJ 124-1), % _ _ Foaming Sequence I, mL _ _ Sequence II, mL _ _ Sequence III, mL _ _ Sequence IV, mL _ _ TEOST Test (Method 33), mg _ _ JAMA Hot Tube Test (K

16、ES 07.803 if available),mg _ _ Total Acid Number (ASTM D 664), mg KOH/g _ _ Total Base Number (ASTM D 2896), mg KOH/g _ _ Sulfated Ash (ASTM D 874), % _ _ Phosphorus content, % _ _ Barium, % _ _ Nitrogen, % _ _ Boron, % _ _ Potassium, % _ _ Calcium, % _ _ Sodium, % _ _ Chlorine, % _ _ Sulfur, % _ _ Copper, % _ _ Zinc, % _ _ Magnesium, % _ _ Other (.001%) _ _ Signature_ Title_ Materials Engineering Concurrence_