FORD WSS-M2F212-A14-2018 FABRIC PVC COATED WITH PREMIUM HAPTIC TOPCOAT ACTIVEX HEAVY DUTY BACKING PERFORATED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2F212-A11).pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2018 06 13 Released Z. Jatkowski, NA Controlled document at www.MATS Copyright 2018, Ford Global Technologies, LLC Page 1 of 3 FABRIC, PVC COATED WITH PREMIUM HAPTIC TOPCOAT, WSS-M2F212-A11 ACTIVEX, HEAVY DUTY BACKING FABRIC, PVC COATE

2、D WITH PREMIUM HAPTIC TOPCOAT, WSS-M2F212-A14 ACTIVEX, HEAVY DUTY BACKING, PERFORATED 1. SCOPE The material defined by this specification is an expanded PVC film laminated to a backing fabric that retains strength once perforated. 2. APPLICATION This specification was released originally for materia

3、l to be used in perforated inserts unlaminated for seats with climate control systems. Product grain will be used to determine and classify the usage ActivEx vinyl for Ford and Lincoln programs. 2.1 LIMITATIONS Material does not provide anti-squeak properties. If anti-squeak properties are required

4、use WSS-M2F186-A2/latest 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification requires the use of approved sources. Only the sources identified on the Ford Approved Source List (ASL) can be used when this specification is listed on the drawing, CAD file, or other documents. The list of approved s

5、ources is located within Ford at or available externally through a Ford Materials Engineer. 3.2 CONDITIONING AND TEST CONDITIONS All test values are based on material conditioned for not less than 24 h prior to testing in a controlled environment of 23 +/- 2 C and 50 +/- 5% relative humidity. Testi

6、ng of the material should occur in the conditioning environment or soon after removal. 3.3 CONSTRUCTION 3.3.1 Weight (ASTM D751, Sample method) A11 960 +/- 50 g/m2 A14 Report 3.3.2 Thickness 0.9-1.2 mm ENGINEERING MATERIAL SPECIFICATION WSS-M2F212-A11/A14 Copyright 2018, Ford Global Technologies, LL

7、C Page 2 of 3 3.4 PHYSCIAL PROPERTIES Rubber coated grips may be required to prevent material slipping from test grips. *WSS-M2F212-A14 samples shall have enhanced micro perforation pattern or perforation pattern approved by Ford Materials Engineering for construction approval. Perforation pattern s

8、hall be noted on the submitted data sheet. 3.4.1 Breaking Strength (ASTM D751, grab method) A11 A14* WMD 1400 N min 550 N min AMD 1500 N min 350 N min 3.4.2 Tear Strength (ASTD D751, Trapezoid tear) A11 A14* WMD 180 N min 80 N min AMD 180 N min 90 N min 3.4.3 Seam Strength (FLTM BN 119-01) A11 A14*

9、WMD Report only 550 N min AMD Report only 400 N min 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 APPROVAL OF MATERIALS Supp

10、liers desiring approval of their materials shall first obtain an expression of interest from Purchasing, Design or Product Development, and Materials Engineering. The supplier shall submit a completed copy of their laboratory test reports, signed by a qualified and authorized representative of the t

11、est facility, demonstrating full compliance with all the requirements of the Material Specification. Tested material samples must be available for review upon request and kept for a minimum of one year. Upon request, the supplier will review the associated quality control documents (Process Failure

12、Mode and Effects Analysis, Control Plans, Certification testing) with Ford. 4.2 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any changes to the material originally approved, whethe

13、r or not such changes affect the materials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Purchasing, and Materials Engineering activities of the proposed changes (with reasons) by submission of a completed Suppliers Reques

14、t for Engineering Approval, SREA. ENGINEERING MATERIAL SPECIFICATION WSS-M2F212-A11/A14 Copyright 2018, Ford Global Technologies, LLC Page 3 of 3 For parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verification (DV), Production

15、 Verification (PV) and Production Part Approval Process (PPAP) sign off must be kept until Job 1. 4.3 RESTRICTED SUBSTANCE MANAGEMENT STANDARD Substance restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions are identified in the Restricted Substance Management Standard WSS-M99P9999-A1, which is updated yearly. It is the suppliers responsibility to comply with this standard on a continuing basis through IMDS and or GMAP reporting. 5. SUMMARY OF REVISIONS