FORD WSS-M3H142-A-2016 CARPET 100% RECYCLED POLYESTER FIBER DILOUR FLAT NEEDLED LATEX BACKCOATED TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 12 N Status No replacement named L. Sinclair, NA 2006 11 09 Revised Added WSS M3H142-A2; Revised Title, 3.4.1, 3.4.2 and 3.4.3 L. Neves 2006 05 25 Activated L. Neves Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 CARPET, 10

2、0% RECYCLED POLYESTER FIBER, DILOUR FLAT WSS-M3H142-A NEEDLED, LATEX BACKCOATED WSS-M3H142-A2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by these specifications is a flat needled, polyester, nonwoven carpet of good quality and uniform composition, backcoated with synthetic latex. Th

3、e face fiber is based on 100% recycled polyester from post consumer sources. 2. APPLICATION These specifications were released originally for material used as floor covering for BV 226/256 2007MY. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materia

4、ls. In addition to the requirements listed herein, the end-item carpet assembly (molded or otherwise fabricated) shall meet all requirements of WSS M8P16-A performance specification, as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform

5、to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 APPEARANCE (FLTM BI 109-01) The color and finish shall match the approved Design Center master sample as received by the design activity (of the affected product engineering office) or shall be as specified on the e

6、ngineering drawing. 3.3 COMPOSITION (ASTM D 276) Fiber 100% recycled Polyester Backcoating Latex 3.4 CONSTRUCTION 3.4.1 Fiber Size & Description 11 dtex, solution dyed ENGINEERING MATERIAL SPECIFICATION WSS-M3H142-A/A1 Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 A A2 3.4.2 Pile Height,

7、 range 7 - 9 mm 3 - 5 mm 3.4.3 Weight, gm, range (FLTM BN 106-01) Pile Fiber 594 726 540 - 660 Latex 360 440 450 - 550 Total 954 1166 990-1210 3.5 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.