FORD WSS-M4C135-A-2010 FUEL 95 RON UNLEADED INITIAL FILL VENEZUELA TO BE USED WITH FORD WSS-M99P1111-A 《委内瑞拉初始注入型无铅95 RON燃料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 03 11 Activated L. BenvenuttiPrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 4 FUEL, 95 RON, UNLEADED, INITIAL FILL, VENEZUELA WSS-M4C135-A 1. SCOPE The material defined by this specification is a w

2、ell-refined gasoline and normal commercial additives. 2. APPLICATION This specification was released originally for material used as initial fill fuel for vehicles designed to operate on gasoline in Venezuela. Additives are present to protect the fuel system. This material is not specifically intend

3、ed for use in certification testing, mileage accumulation or general fueling. 3. REQUIREMENTS This material must be produced using current refinery practices for market place fuels and must meet all pertinent legal gasoline requirements in Venezuela. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIAL

4、S Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 OCTANE NUMBERS 3.2.1 Research, min 95.0 (ISO 5164 / ASTM D 2699) 3.2.2 Anti Knock Index, min 91.0 (ISO 5163 / ASTM D 2700) 3.3 TOTAL SULFUR, max 600 mg/kg (ISO 14

5、596 / 8754 / ASTM D 4294 / 5453 / 1266) 3.4 METAL CONTENT 3.4.1 Lead, max 0.0130 g/L (ASTM D327)3.4.2 Phosphorus, max 0.0010 g/L (ASTM D321) 3.4.3 Manganese, max 0.0010 g/L (ASTM D381) ENGINEERING MATERIAL SPECIFICATIONWSS-M4C135-A Printed copies are uncontrolled Copyright 2010, Ford Global Technolo

6、gies, LLC Page 2 of 4 3.5 COMPOSITION 3.5.1 Hydrocarbons, max % volume (ASTM D 1319 / 5769 / DIN 51 791) Aromatics 35 Olefins + Aromatics 45 Saturates Report 3.5.2 Gum Content, max (ISO 6246 / ASTM D 381) Washed 5 mg/100 mL Unwashed Report 3.5.3 Benzene, max 1.2% vol (ASTM D 3606 / 5769 / EN 12177 /

7、 EN 238) 3.5.4 Total Oxygen, max 3.7% mass 3.6 DISTILLATION RANGE, max (ASTM D 86-9 / 3710) Volume Evaporated Temperature Initial boiling point Report 10% 70 C 50% 77 121 C 90% 195 C Final boiling point 225 C Residue, max 2% volume 3.7 VAPOR PRESSURE 3.7.1 Seasonal Geographical Volatility Shall meet

8、 the local appropriate specifications. 3.8 OXIDATION STABILITY, MIN 240 minutes (ISO 7536 / ASTM D 525) 3.9 CORROSION PROTECTION 3.9.1 Copper Tarnish, min 1 (ISO 2160 / ASTM D 130, 3 h at 50 C) 3.10 ODOR The material shall have the usual characteristic odor of gasoline. There shall be no obvious for

9、eign odors. 3.11 APEARANCE (Visual inspection / ASTM D 4176) Pink or Orange bright, no free water or particulates ENGINEERING MATERIAL SPECIFICATIONWSS-M4C135-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 4 3.12 ADDITIVES Fuels shall contain normal commerc

10、ial additives at concentrations representative of good commercial practice in the receiving locale (unless otherwise specified). Metallic additives, including lead, manganese and phosphorus are not allowed. 3.13 CERTIFICATION Supplier shall certify that the gasoline is a formula that has been tested

11、 and meets Ford Motor Company requirements as stated in these specifications. Technical evidence of these data and manufacturing limits must be tabulated on the attached form. This certification shall be by the suppliers director of research or other authorized official and submitted to the responsi

12、ble Ford purchasing activity. This information will then be forwarded to the Materials Activity of the Engine Product Engineering Office or to the product engineering office responsible for source approval. 4. GENERAL INFORMATION The information given below is provided for clarification and assistan

13、ce in meeting the requirements of this specification. 4.1 FLAMMABILITY This material represents a potential fire hazard. The Manufacturing Engineering Department or other responsible activity shall notify both the Security and Safety Units of its presence to assure that proper fire precautions are p

14、rovided. The location in which it is used or stored shall be included in the notifications. 4.2 SAMPLING AND SUBMISSION OF SAMPLES (ISO 3170 / 3171, ASTM D 4057 / D 4177) Quality control records must be made available to Fuels and Lubricants Engineering upon request. ENGINEERING MATERIAL SPECIFICATI

15、ONWSS-M4C135-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 4 of 4 Company _ Terminal _ Volatility Grade _ Specification _ Date _ Inspection Results Specification Typical Manufacturing Limits Appearance Clean and free of Impurities _ _ Research Octane Number 95.

16、0 min _ _ Anti Knock Index 91.0 min _ _ Lead, g/L 0.0130 max _ _ Manganese, g/L as MMT 0.0010 max _ _ Phosphorus, g/L 0.0010 max _ _ Total Sulfur, mg/kg 600 max _ _ Copper Corrosion, 3h at 50 C 1 max _ _ Oxidation Stability.100 C 240 min _ _ Vapor Pressure, kPa Report _ _ Specific gravity at 20 C Re

17、port _ _ Distillation Range Initial Boiling Point, C 30 min _ _ 10% Evaporated, C 70 C max _ _ 50% Evaporated, C 77 - 121 C _ _ 90% Evaporated, C 195 C max _ _ Final Boiling Point, C 225 C max _ _ Residue, % vol 2 max _ _ Hydrocarbons, % vol Aromatics 35 max, _ _ Olefins + Aromatics 45 _ _ Saturates Report _ _ Benzene, % vol 1.2 max _ _ Gum, mg/100 ml washed 5 _ _ Gum, mg/100 ml unwashed Report _ _ Water and Sediments, % mass 0.01 max _ _ Additives Type & Formula Manufacturing Limits Anti-oxidant _ _ Anti-corrosion _ _ Detergent _ _ Metal Deactivator _ _ Miscellaneous _ _ Signature_ Title_