FORD WSS-M5H25-A-2014 FABRIC PRISMATIC HEAVY DUTY PATTERN POLYESTER KNIT INTERIOR TRIM AND PACKAGE TRAYS TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 01 2014 10 07 Revised See Summary of Revisions L. Sinclair, NA 2003 01 08 Activated M. Dumitrescu Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, PRISMATIC HEAVY DUTY PATTERN, POLYESTER KN

2、IT, WSS-M5H25-A INTERIOR TRIM AND PACKAGE TRAYS 1. SCOPE The material defined by this specification is a Prismatic Heavy Duty pattern, knitted face fabric. 2. APPLICATION This specification was released originally for material used as a cover material for interior trim pillars and package trays. 2.1

3、 LIMITATION Dark colors used for pillar applications must use a dark backing to prevent read through. Material must be used as 100% bonded to a substrate. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS 3.1.1 Material suppliers and part producers must conform to the Companys Stand

4、ard Requirements For Production Materials (WSS-M99P1111-A). 3.1.2 Materials manufactured to this specification shall also meet the requirements contained in WSS-M15P6-E/latest. 3.1.3 Materials used in interior applications must meet the requirements outlined in WSS-M99P2222-D1/latest. Test data must

5、 to be provided by the Tier 1 at the appropriate program milestone. 3.2 APPEARANCE (FLTM BI 109-01) The color, pattern, and finish shall match the approved Design Center master sample, or shall be specified on the engineering drawing. 3.3 COMPOSITION (ASTM D 276) Face Fabric 100 % Polyester Backing

6、Non-Woven Fabric 3.4 FACE FABRIC REQUIREMENTS The following requirements shall be conducted on unbonded fabric: ENGINEERING MATERIAL SPECIFICATION WSS-M5H25-A Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.4.1 Fiber Description and Construction (ASTM D 1244) Face (A) 7.8 tex f36 (polyes

7、ter) (B) 7.8 tex f36 (polyester) (C) 7.8 tex f36 (polyester) Back 2.2 tex f1 (polyester) 3.4.2 Fabric Count (ASTM D 3887) Wales 134 - 150 wales/10 cm Courses 236 - 259 courses/10 cm 3.4.3 Weight, (Face Fabric) (FLTM BN 106-01) 213 +/- 20 g/m2 3.4.4 Method of Dyeing Piece dyed 4. GENERAL INFORMATION

8、The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 5. SUMMARY OF REVISIONS 2014 10 07 Removed sections 3.6 foam requirements, 3.7 laminate requirements, 3.8

9、 abrasion, 3.9 surface fiber deterioration, 3.10 snagging, 3.11 fade, 3.12 heat aging, 3.13 crocking, 3.14 bleeding, 3.15 soiling and cleanability, 3.16 strength properties, 3.17 odor, 3.18 fogging, 3.19 flammability. All referenced in WSS-M15P6-E Added reference to WSS-M99P2222-D1/latest Removed section 3.3 roll goods quality and reference to WSS-M15P4-E. Corrected face weight nominal and tolerance Removed reference to polyether polyurethane backing. Added limitation