1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 01 2012 03 20 N Status No replacement named N. Benipal, NA 2004 10 28 Activated C. Bezant Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 1 LOW SOLIDS RESIN WITH DYE CONCENTRATE WSS-M99J389-A NOT TO
2、 BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a solvent-based resin with low solids content and dye concentrate. It is suitable for wood and wooden derived products to be used between insulating sealer. 2. APPLICATION This specification WSS-M99J389-A was released for
3、 low solids resin with dye concentrate for application on bleached bases on insulating sealer for wooden decorative automotive components. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly m
4、ust perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Application method spraying 3.2.2 Storage Stability Shelf life: When stored at 20 - 23C 6 Months 3.2.3 Drying/Curing: Dust Dry after 10 min at 20 23 C Recoatable after 30 min at 20 23 C