FORD WSS-M99P2222-F2-2018 PERFORMANCE VEHICLE INTERIOR ENVIRIOMENT QUALITY MATERIAL ALLERGY AND DIRECT SKIN CONTACT REQUIREMENTS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FOR.pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 02 2018 04 25 Editorial See Summary of Revisions D. Stark, NA 2017 07 27 Revised Revised Organotin Compound limits 3.6.3 S. Riewer, EU 2017 03 17 Released D. Stark, NA Controlled document at www.MATS Copyright 2018, Ford Global Technolog

2、ies, LLC Page 1 of 10 PERFORMANCE, VEHICLE INTERIOR ENVIRONMENT QUALITY WSS-M99P2222-F1 MATERIAL REQUIREMENTS PERFORMANCE, VEHICLE INTERIOR ENVIRIOMENT QUALITY WSS-M99P2222-F2 MATERIAL ALLERGY AND DIRECT SKIN CONTACT REQUIREMENTS 1. SCOPE The purpose of this document is to establish guidelines perta

3、ining to certain materials with regards to Odor, Fogging, the emission of Volatile Organic Carbon Compounds (VOCs) and direct skin contact with the vehicle occupants as required by regions to support governmental restrictions for manufacturing and sale of vehicles within the given region. 2. APPLICA

4、TION WSS-M99P2222-F1 is applicable to requirements for odor, fogging, and the emission of VOCs only. WSS-M99P2222-F2 is applicable to requirements for allergy and direct skin contact testing only. The requirements established by this Standard apply to materials only defined by this document supplied

5、 to Ford and assembled into the cabin space. They apply equally to Tier 1 Suppliers, Full Service Suppliers, Proprietary (black box), and Ford-specified items. 3. REQUIREMENTS 3.1 APPROVED SOURCES This specification is performance based and does not have approved sources. 3.2 CONDITIONING AND TEST C

6、ONDITIONS Table 1 lists test material type and criteria for testing. Material supplier responsibilities: Shall use the Material Information Label in Appendix 1 Sampling the test material immediately after manufacturing Preferred process-material supplier conditions the test specimens according to Ta

7、ble 1, Conditioning Period column After the 14 28 conditioning period or after manufacturing, test specimens must be placed in a new polyethylene (PE) coated aluminium bag or wrapped tightly in silicone-free aluminium foil then placed in a new PE bag for shipping to a test laboratory Test material s

8、hall be shipped to the test laboratory within the next business day of bagging/packaging Test laboratory responsibilities: ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2 Copyright 2018, Ford Global Technologies, LLC Page 2 of 10 Inspect test material bagging/packaging upon delive

9、ry. Damage to the bagging/packaging of the test material is cause for rejection and the test laboratory shall request additional test material from the material supplier If the test material has not been conditioned by the material supplier: within 5 business days of receiving the test material, cut

10、 out test specimens according to appropriate test methods listed under paragraph 3.4 of this specification Condition test specimens according to Table 1, Conditioning Period column After the 14 28 conditioning period, test specimens must either be tested immediately or placed in a new PE-coated alum

11、inium bag or wrapped tightly in silicone-free aluminium foil then placed in a new PE bag until testing. Testing must be performed within 30 days of receiving the test material All test values are based on material conditioned for not less than 24 h prior to testing in a controlled environment of 23

12、+/- 2 C and 50 +/- 5% relative humidity. Testing of the material should occur in the conditioning environment or soon after removal. 3.3 TEST MATERIAL INFORMATION (WSS-M99P2222-F1 ONLY) Table 1 Test material types and criteria for testing Test Material Type Test Material Dimensions Conditioning Peri

13、od Color / Grain Manufacturing Location Leather (seating, steering wheel, IP, trim) hide 14 28 days after manufacturing Any color Note: Change in color or grain DOES NOT require material to be re-tested Change in manufacturing location from original material approval DOES require material to be re-t

14、ested Fabric (seating, headliner, trim) 1 m2 Polymeric Film (seating, IP, trim) Carpet (floor, luggage compartment, trunk, package tray, throw-in floor mats) 3.4 REPORTING FORMAT AND DATA EXCHANGE The data exchange file shall be constructed as follows. VOC concentrations as well as all other relevan

15、t parameters shall be reported and exchanged as a csv-formatted data file. Parameter values shall be separated by a comma, ASCII-Code #h2C. The decimal marker of numerical values shall be a point, ASCII-Code #h2E. Lines shall be terminated by carriage return, ASCII-Code #h0D. No thousands separators

16、 shall be used. 3.5 MATERIAL REQUIREMENTS (WSS-M99P2222-F1 ONLY) Reference Appendix 3 for the list of capable laboratories that can conduct required testing Use the reporting format listed in 3.4 REPORING FORMAT AND DATA EXCHANGE ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2 Cop

17、yright 2018, Ford Global Technologies, LLC Page 3 of 10 3.5.1 Odor (FLTM BO 131-03) Condition 1 Rating 3, max Condition 2 Rating 3, max Condition 3 Rating 3, max 3.5.2 10-L Bag Method (FLTM BZ 108-01) 3.5.2.1 Formaldehyde Report Values, g/m3 3.5.2.2 Acetaldehyde Report Values, g/m3 3.5.2.3 Acrolein

18、Report Values, g/m3 3.5.2.4 Benzene Report Values, g/m3 3.5.2.5 Toluene Report Values, g/m3 3.5.2.6 Ethylbenzene Report Values, g/m3 3.5.2.7 Xylenes Report Values, g/m3 3.5.2.8 Styrene Report Values, g/m3 3.5.2.9 Total VOC as Toluene equivalent Report Values, g/m3 3.5.3 Fogging 3.5.3.1 Photometric 7

19、0 min (SAE J1756, 3 h at 100 C heating, 21 C Cooling plate, post-test conditioning 16 h) Formation of clear film, droplets or crystals is cause for rejection 3.5.3.2 Gravimetric (Leather Only) 4.0 mg. max or as (SAE J 1756, Method B, required in Material 16 h at 100 C heating, 21 C cooling Specifica

20、tions Plate, post conditioning 4 h) 3.6 ALLERGEN REQUIREMENTS (WSS-M99P2222-F2 ONLY) INTERIOR DIRECT SKIN CONTACT FOR LEATHER, FABRICS, POLYMERIC FILMS, WEBBING AND STEERING WHEEL IN-MOLD PAINT These tests are obligatory for all materials which have a foreseeable direct skin contact longer than 30 s

21、econds. See Appendix 2 for affected components See Appendix 3 for a list of capable laboratories that can conduct the tests required ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2 Copyright 2018, Ford Global Technologies, LLC Page 4 of 10 Use the reporting format listed in 3.4 RE

22、PORING FORMAT AND DATA EXCHANGE 3.6.1 pH Of Aqueous Extract 3.5 8.0 (DIN EN ISO 4045) Leather Only (DIN EN ISO 3071) 3.6.2 Formaldehyde (release under test conditions) 100 mg/kg max (DIN EN ISO 17226-2) Leather Only (DIN EN ISO 14184-1) 3.6.3 Organotin Compounds (DIN EN ISO 17353, Solvent Extraction

23、) Tributyltin (TBT) 0.025 mg/kg max Dibutyltin (DBT) 5 mg/kg max Monobutyltin (MBT) 1 mg/kg max Dioctyltin (DOT) 10 mg/kg max Triphenyltin (TPT) 1 mg/kg max 3.6.4 Soluble Mineral Tanning Agents Leather Only 200 mg/kg max (extraction with acidic sweat solution according to DIN EN ISO 105-E04 (24h/40C

24、) determination by means of ICP-OES, AAS, ICP-MS-sample size 3x3 mm max, sample weight 1 +/- 0.1g, ratio of sample size/acidic sweat solution by volume 1/20, extraction time 1 hr +/- 5 minutes without shaking.) Total Content of Soluble Al, Cr, Ti, Zr 3.6.5 Other Heavy Metals See Table 2 (extraction

25、with acidic sweat solution according to DIN EN ISO 105-E04 determination by means of ICP-OES, AAS, ICP-MS-sample size 3 x3 mm max, sample weight 1 +/- 0.1g, ratio of sample size/acidic sweat solution by volume 1/20, extraction time 1 hr +/- 5 minutes without shaking.) Table 2 List of heavy metals He

26、avy Metal Limit (max) Antimony 5.0 mg/kg 25.0 mg/kg TEXTILES ONLY Arsenic 0.2 mg/kg Cadmium 0.1 mg/kg Cobalt 4.0 mg/kg Copper 50.0 mg/kg Lead 0.8 mg/kg Mercury 0.02 mg/kg Nickel 4.0 mg/kg ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2 Copyright 2018, Ford Global Technologies, LLC

27、 Page 5 of 10 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 APPROVAL OF MATERIALS Suppliers desiring approval of their mater

28、ials shall first obtain an expression of interest from Purchasing, Design or Product Development, and Materials Engineering. The supplier shall submit a completed copy of their laboratory test reports, signed by a qualified and authorized representative of the test facility, demonstrating full compl

29、iance with all the requirements of the Material Specification. Tested material samples must be available for review upon request and kept for a minimum of one year. Upon request, the supplier will review the associated quality control documents (Process Failure Mode and Effects Analysis, Control Pla

30、ns, Certification testing) with Ford. 4.2 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics to the material upon which approval was originally granted. Prior to making any changes to the material originally approved, whether or not such changes affect the mater

31、ials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Purchasing, and Materials Engineering activities of the proposed changes (with reasons) by submission of a completed Suppliers Request for Engineering Approval, SREA. For

32、parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verification (DV), Production Verification (PV) and Production Part Approval Process (PPAP) sign off must be kept until Job 1. 4.3 RESTRICTED SUBSTANCE MANAGEMENT STANDARD Substan

33、ce restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions are identified in the Restricted Substance Management Standard WSS-M99P9999-A1 which is updated yearly. It is the suppliers responsibility to comply with this standard on

34、 a continuing basis through IMDS and or GMAP reporting. 5. SUMMARY OF REVISIONS 2018 04 25 Editorial Clarified scope of document. 2017 07 27 3.6.3 Organotin Compounds Dibutyltin (DBT) was 1 mg/kg max, Dioctyltin (DOT) was 1 mg/kg max ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2

35、 Copyright 2018, Ford Global Technologies, LLC Page 6 of 10 Appendix 1 Material Information Label Ford Test Specification WSS-M99P2222-F1 / -F2 Material Type (fabric, leather, etc.) Supplier Name Material Product Code/Trade Name Manufacturing Site Location Supplier Contact Name Supplier Contact E-ma

36、il Ford Material Specification Number Ford Vehicle Program Code Manufacturing Date Packaging Date Material Ship Date Remarks NOTE: Material information label shall be taped to the outside of the packaging. ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2 Copyright 2018, Ford Global

37、 Technologies, LLC Page 7 of 10 APPENDIX 2 Reference list of parts to be tested. See specific program for complete list. Center Console Armrest Door Trim Upper armrest Lower armrest Seat Belt All Seat Belt Webbings Gearshift Gear Knob Non leather Gear Knob Leather Seats (front & rear) All fabrics Al

38、l leathers/polymeric films Steering Wheel Steering Wheel NON LEATHER Steering Wheel LEATHER ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2 Copyright 2018, Ford Global Technologies, LLC Page 8 of 10 APPENDIX 3 Laboratories for Vehicle Interior Environment Quality Testing Please co

39、ntact the desired laboratory to confirm test capabilities No claim to be complete Europe: TV NORD AG Am TV 1 30519 Hannover Tel.: +49 (0)511 986-0 Fax: +49 (0)511 986-1237 info tuev-nord.de TV Produkt und Umwelt GmbH General Manager Product and Environment Am Grauen Stein 51105 Cologne Germany Phone

40、: +49 (221) -806-2160 Fax: +49 (221) -806-2882 Contact Person: Dr. Markus Clemens () Imat-Uve GmbH Krefelder Str. 679 - 689 D-41066 Mnchengladbach Germany Tel. 0049-2161-4951980 Fax. 0049-2161-4951981 Contact person: Hans Peter Schlegelmilch (hans-peter.schlegelmilchimat-uve.de) Intertek Deutschland

41、 GmbH Innovapark 20 D-87600 Kaufbeuren Germany T: +49 8341 9556 0 F: +49 711 27311 559 www.intertek.de Certech Rue Jules Bordet Zone industrielle C B-7180 Seneffe Belgium Tel. +32 (0)64 520 211 Fax. +32 (0)64 520 210 E-mail : infocertech.be Mainsite GmbH & Co KG Analytik-Service Obernburg D- 63784 O

42、bernburg ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1 WSS-M99P2222-F2 Copyright 2018, Ford Global Technologies, LLC Page 9 of 10 Germany Tel. +49(0)6022/81-2671 E-mail: analytikmainsite- Forschungsinstitut fr Leder und Kunststoffbahnen FILK Dr. Bernd Matthes Meiner Ring 1-5 D-09599 Freiberg Ge

43、rmany phone(+49)3731 366 158 fax:(+49)3731 366 130 E-Mail: bernd.matthesfilkfreiberg.de Bureau Veritas Laboratoires 8 av. de Bourgogne ZA des Bthunes - BP 99102 CEDEX 95073 CERGY PONTOISE, Ile-de-France Telephone: + 33 1 34 64 22 83 Fax Number: + 33 1 34 64 21 58 http:/www.bureauveritas.fr/ SATRA Qu

44、ality Assurance Wyndham Way Telford Way Ind Est Kettering NN16 8SD United Kingdom Tel: + 44 (0) 1536 410000 Fax: +44 (0) 1536 410626 Contact Person: John Hubbard (johnhsatra.co.uk) North America: Intertek Automotive Research 5404 Bandera Road San Antonio, Texas 78238 Phone: (210) 523-4680 Contact Pe

45、rson: Leonard (Lenny) Orzech () Reliable Analysis, Inc. 32201 N. Avis Drive Madison Heights, MI 48071 Phone: (248) 588-9770 Contact Person: Tobin Clark () Exova 1920 Concept Drive Warren, MI 48091 Phone: (586) 501-1800 Contact Person: Rocco Rizzo () ENGINEERING MATERIAL SPECIFICATION WSS-M99P2222-F1

46、 WSS-M99P2222-F2 Copyright 2018, Ford Global Technologies, LLC Page 10 of 10 China: Center Testing International Corporation (Shanghai) Building 5, No. 777 Xinjunhuan Road, Pujiang town, Minhang District, Shanghai. Phone: +86-(0)21-31073700 Fax: +86-(0)21-31073100 China Automotive Technology Researc

47、h Center Tianjin Automotive Test Center Test Building, No.68, Xianfeng East Road, Dongli District, Tianjin, China(P.C.:300300) Phone: +86-(0)22-84379666-6928 Fax: +86-(0)22-84379662 Contact Person: Jane Li Intertek Automotive Service (Shanghai) Building T52-8 No.1201 Guiqiao Rd., Jinqiao Developmen

48、t Zone, Shanghai Phone: +86 (0)21 50319089-227 Contact Person: Jason Xiang J Ford Asia Pacific Materials Laboratory Ford Motor Research & Engineering (Nanjing) Co., Ltd No.118 General Road, Jiangning Development Zone, Nanjing 211100, China Phone: +86 (0)25-81063307 Contact Person: Joe Guo Center Testing International Corporation (Chongqing) Building 32, Yingtian guangdian Industrial park, Caijiagang town, Beibei district, Chongqing E-mail: tower.chencti- Intertek Automotive Service (Chongqing) Building 3 Unit 2,No.5 G