FORD WSS-M9P12-A1-2014 PERFORMANCE OF ELASTOMERIC SEALS IN ENGINE OIL TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 00 2014 02 26 Released P. Addis, EU, A. Reaume, NA Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 1 PERFORMANCE OF ELASTOMERIC SEALS IN ENGINE OIL WSS-M9P12-A1 1. SCOPE The specification defines t

2、he basic requirements for elastomeric materials used as engine oil seals. 2. APPLICATION This specification was released originally to cover the basic requirements for all elastomeric engine seal materials. This specification covers only engine oil applications; the testing will be different for oth

3、er fluids or for hot air. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 COMPRESSION STRESS RELAXATION 10% RSF (SAE J2979, 3000 h at 150 C +/- 2

4、 C (Residual Sealing Force) 25% compression, with the procedure as noted below). Residual sealing force readings: Per SAE J2979 take readings initially at 1 hour + 5 minutes, 24 hours, then at weeks 1, 3, 6, 9, 12, 15 and 18. Fluid Changes: Perform fluid changes at weeks 3, 6, 9, 12 and 15 (after se

5、aling force readings) Test Fluids Engine oil: Factory fill engine oil (Use oil specified for each region of use) Full synthetic engine oil Reference oil: ASTM D471 SF 105 For recommended regional factory fill and full synthetic engine oils for the Compression Stress Relaxation test, contact Ford Mat

6、erials Engineering at . 3.3 TRANSITION TEMPERATURE 3.3.1 Glass Transition Temperature -15C max (ASTM D7426, DSC Method, 20 C/minute heating rate, nitrogen atmosphere) or Alternate method: ENGINEERING MATERIAL SPECIFICATION WSS-M9P12-A1 Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.3.2

7、 Low Temperature Brittleness Point -25C max (ISO 812, Type B specimen / ASTM D 2137, Method A) 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications.