GOST EN 50065-2-2-2014 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148 5 kHz Part 2-2 Immunity requirements for mains communications equipmenenci.pdf

1、 , () INTERSTATE COUNCIL FOR STANDARDIZATION, METROLOGY AND CERTIFICATION (ISC) EN 50065-2-2 2014 3 148,5 22 95148,5 , (EN 50065-2-2:2003, IDT) 2015 EN 50065-2-22014 II , - 1.092 . 1.2 2009 . -, , . , , 1 - 30 2 3 , (- 14 2014 . 72-) : ( 3166) 004 97 ( 3166) 004 97 AM KG MD - RU 4 18 2014 . 1635- EN

2、 50065-2-22014 - 01 2015 . 5 EN 50065-2-2:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in

3、 industrial environments ( - 3 148,5 . 2-2. , 95 148,5 ), 1 (2005 .) . EN 50065-2-2:2003 1 - CENELEC TC 205A (HBES), SC 205A . (en). - , - , . (IDT) 6 EN 50065-2-22014 III - , . () - - . , , 2015 -, - EN 50065-2-22014 IV - 95 148,5 , . , , , 2-1 N 50065. - , , 3 95 , 2-3 N 50065. , , - , . - - 2-3 N

4、 50065, - . , , - , - , . , . , , - , - . EN 50082-2, . , 5 -, EN 50082-2, - , . EN 50082-2, . , , . . EN 50065-2-22014 1 3 148,5 2-2 95148,5 , Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 2-2. Immunity requirements for mains communications equip

5、ment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments 2015 03 01 1 , - 3 148,5 - . , - , . - , - . , -, , - , , , . - , EN 50065-1, () -. - , , - , . , . - . , - . , , - , . , - (, - ). . , , ( EN 50065-1), - , . . EN 50065-2-22014

6、 2 2 . , - ( ). EN 50065-1:2011 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 1: General requirements, frequency bands and electromagnetic disturbances ( 3 148,5 . 1. - , ) EN 55022:1998 Information technology equipment Radio disturbance characteri

7、stics Limits and methods of measurement (CISPR 22:1997, mod) ( . - . ) EN 61000-3-2:2006 + 1:2009 + 2:2009 Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) (IEC 61000-3-2) ( (). 3-2. . - ( 16 ( ) E

8、N 61000-4-2:2009 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Electrostatic discharge immunity test (IEC 61000-4-2) (). 4-2. . EN 61000-4-3:2006 + 1:2008 + 1:2010 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-freq

9、uency, electromagnetic field immunity test (IEC 61000-4-3, mod) (). 4-3. . - EN 61000-4-4:2012 Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement tech-niques Electrical fast transient/burst immunity test (IEC 61000-4-4) (). 4-4. . / EN 61000-4-5:2006 Electromagnetic compatibility

10、(EMC) Part 4-5: Testing and measurement tech-niques Surge immunity test (IEC 61000-4-5) (). 4-5. - . EN 61000-4-6:2014 Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement tech-niques Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6) - (). 4-6. .

11、- , EN 61000-4-8:2010 Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement tech-niques Power frequency magnetic field immunity test (IEC 61000-4-8) - (). 4-8. . EN 61000-4-11:2004 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short i

12、nterruptions and voltage variations immunity tests (IEC 61000-4-11) - (). 4-11. . , EN 61000-6-2:2005 Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments ( - (). 6-2. . - ) CISPR 16-1-2:2006*)1 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus Ancillary equipment Conduc-tive disturbance ( - . 1. . - . ) IEC