GOST ISO 10791-2-2013 Machining centres Part 2 Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)《加工中心 第2部分 立.pdf

1、 , () INTERSTATE COUNCIL FOR STANDARDIZATION, METROLOGY AND CERTIFICATION (ISC) ISO 10791-2 2013 2 ( Z) (IS 10791-2:2001, IDT) 2014 ISO 10791-22013 II , - 1.092 . 1.22009 . -, . , , , 1 - ( ) , . 4 2 3 , (- 14 2013 . 44-2013) : ( 3166) 004-97 ( 3166) 004-97 AM BY KG RU TJ 4 13 2014 . 136- ISO 10791-

2、2 2013 - 1 2015 . 5 ISO 10791-2:2001 Test conditions for machining centres. Part 2: Geometric tests for machines with vertical spindle or universal heads with ver-tical primary rotary axis (vertical Zaxis) ( . 2. - - ( Z). - - 1.52001 ( 3.6). - () , . . , - , . (en). (IDT). 6 ISO 10791-22013 III - ,

3、 . () - - . , C, 2014 -, - ISO 10791-22013 IV 1 . 1 2 1 3 . 2 3.1 . 2 3.2 ISO 230-1 2 3.3 2 3.4 2 3.5 2 3.6 . 3 3.7 () . 3 3.8 . 3 3.9 3 3.10 3 3.11 . 3 4 . 6 4.1 . 6 4.2 . 9 4.3 12 4.4 15 4.5 . 20 4.6 W, Z 24 () . 26 () 32 () 34 . 41 . () . 41 . () , , . 42 ISO 10791-22013 V , , , , - , - . IS 1079

4、1 , , , . IS 10791 IS 230. , - , , . IS 10791 , . - , . IS 10791 , , , , , . IS 10791 : 1. ( Z); 2. - ( Z); 3. - (- Z); 4. - ; 5. -, ; 6. , ; 7. ; 8. ; 9. ; 10. ; 11. . ISO 10791-22013 1 2 ( Z) Machining centres. Part 2. Geometric tests for machines with vertical spindle or universal heads with vert

5、ical primary rotary axis (vertical Zaxis) 20150101 1 - (, . ) ( Z) IS 230-1. , (X, Y, Z) 2000 , B, (A C). , , , . A, C : . ( - AG1 G6); B. ( BG1 BG2); . ( CG1 CG7). - , . , . 2 , - , . - . ISO 230-1:1996 Test code for machine tools Part 1: Geometric accuracy of operating under no-load or finishing c

6、onditions ( . 1. , ) ISO 10791-22013 2 ISO 8526-1:1990 Modular unit for machine tools Workholding pallets Part1: Workholding pallets up to 800 mm nominal size ( . . 800 ) ISO 8526-2:1990 Modular unit for machine tools Workholding pallets Part2: Workholding pallets of nominal size greater than 800 mm

7、 ( . . 2. - 800 ) - , 1 , - . (), - () . , , , , . 3 3.1 , - ; , - , - . : 0,01/1000 = 10 (rad ) 2 3.2 ISO 230-1 ISO 230-1, , - , - -. ( 4 AC) - ISO 230-1, -. 3.3 , -. - , . 3.4 -, . , , / , . - - , , . 3.5 4 AC - . , - . ( , , ISO 10791-22013 3- . ) - 0,001 . 3.6 , , . 3.7 () , , , - ( G15 G20), -, , / . 3.8 - , / -, , . -