GOST R ISO 17078-3-2013 Petroleum and natural gas industries Drilling and production equipment Part 3 Running tools pulling tools and kick-over tools and latches for side-pocket ma.pdf

1、 17078-3null2013 3 , ISO 17078-3:2009Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels(IDT) 17078-32013II1 - - () -, 42 023 3 - 6 2013 . 888-4 17078-3:2009 - . . 3. , (ISO 17078-3:2009

2、Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels). 1.52012 ( 3.5). - , . , - 5 1.02012 ( 8). ( 1 ) , -. () . , - - (gost.ru) , 2014 , - - 17078-32013 III1 12 13 .24 . . . . . . . . . .

3、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 65.1 65.2 75.3 75.4 85.5 ( ) .85.6 85.7 85.8 95.9 96 96.1 96.2 .96.3 96.4 126.5 136.6 .137 / .147.1 .147.2 .147.3 .157.4 .167.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4、 . . . . . . . . . . . .197.6 197.7 () 207.8 .207.9 .207.10 , , () .20 A () 21 B () .23 C () 25 D () .28 E () .30 () .32 () 33 34 17078-32013IV 17078-3, - 4 / 67 , , -. 17078 . :- 1: ;- 2: ;- 3: , , ;- 4: . , , , - , . , , , , . , - /, , / . -, , . / . . , , , - . / . . - , , - , -/. , , , / , /. ,

5、. . , , - , / - , , , . . -, , , /- . - / . 17078-1 - , . 17078-2 - . 17078-4 .1 201403011 -, , , - , , . , , , -, , . , . , , - , , - , . 2 - . . ( ) - . : 2859-1 . 1. - (AQL) (ISO 2859-1, Sampling procedures for inspection by attributes; part 1: sampling plans indexed by acceptance quality level (

6、AQL) for lot-by-lot inspection) 3601-1 . . 1. - , , (ISO 3601-1, Fluid power sys-tems O-rings Part 1: Inside diameters, cross-sections, tolerances and size identification code) 3601-3 . . 3. - (ISO 3601-3, Fluid power systems O-rings Part 3: Quality acceptance criteria) 6506-1 . . 1. (ISO 6506-1, Me

7、tallic materials Brinell hardness test Part 1: Test method) 17078-32013 3 , Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements 17078-320132O 6507-1 . .

8、1. - (ISO 6507-1, Metallic materials Vickers hardness test Part 1: Test method) 6508-1 . . 1. - ( A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1, Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) 6892-1 . (ISO 6892-1, Metallic materials. Tensile tes

9、ting. Method of test at ambient temperature) 9000 . (ISO 9000, Quality management systems. Fundamentals and vocabulary) 15156 ( ) . -, , - (ISO 15156, Petroleum, petrochemical and natu-ral gas industries Materials for use in H2S-containing environments in oil and gas production) 17078-1:2004 . -. 1.

10、 (ISO 17078-1:2004, Petroleum and natural gas indus-tries Drilling and production equipment Part 1: Side-pocket mandrels) 17078-2:2007 . -. 2. (ISO 17078-2:2007, Petroleum and natural gas industries Drilling and production equipment Part 2: Flow-control devices for side-pocket mandrels)/ 17025 - (IS

11、O 17025, General requirements for the competence of testing and calibration laboratories)ASME BPVC-VIII:2007, VIII , - (ASME BPVC-VIII:2007, Section VIII Rules for Construction of Pressure Vessels Division*)ASME BPVC-IX:2007, IX (ASME BPVC-IX:2007, Section IX Welding and Brazing Qualifications)ASTM A 370 - (ASTM A 370 Standard Test Methods and Definitions for Mechanical Testing of Steel Pro-ducts*)ASTM D 1415 . (ASTM D 1415 Standard Test Method for Rubber Property International Hardness)ASTM D 2240 (ASTM D 2240 Standard Test Method for Rubber Property Durometer Hardness)AST