GSA A-A-2192A-1994 PAPER BLOTTING《吸墨纸》.pdf

1、Color 1 - Chocolate Brown. Color 2 - Moss Green. Color 3 - Light Green. r Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to General Services Administration, Federal Supply Service, Engineering Branch, 26 Fe

2、deral Plaza, New York, NY 10278 I A-A-2192A 9979974 0163461 O82 Distribution Statement A: Approved for public release; Distribution is unlimited. METRIC A-A-2 l92A March 30, 1994 SUPERSEDING A-A-2192 September 23, 1983 COMMERCIAL ITEM DESCRIPTION PAPER, BLOTTING The General Services Administration h

3、as authorized the use of this commercial item description in preference to Federal Specification -P-63. This Commercial Item Description covers blotting paper for use in desk blotters. CLASSIFICATION Blotting paper covered by this specification shall be of the following sizes and colors. Size A - 48

4、3 mm X 610 mm (19 X 24 inches). Size B - 610 mm X 925 mm (24 X 38 inches). 1. A. B. SALIENT CHARACTERISTICS Paper: The blotting paper shall be made from fibrous, cellulosic material with a basis weight of 308 g/m2 (100 lbs. 19 X 24-500) +/- 5%, when tested in accordance with TAPPI test method T410.

5、The blotting paper shall have an average bursting strength of 170 kPa (25 psi), minimum, when tested in accordance with TAPPI test method T403. The blotting paper shall have a plain finish. Construction: The Blotting paper sheets shall be 483 mm X 610 mm (19 X 24 inches) or 610 mm X 925 mm (24 X 38

6、inches), as specified in the contract or order. A tolerance of -0, + 3.17 mm (-0, + 1/8 inch) is permitted on each dimension. Licensed by Information Handling ServicesA-A-2L92A 9999974 OLb34b2 T1i9 A-A-2 19 2A C. Colors: The blotting papers shall be produced by pulp dyeing and furnished in chocolate

7、 brown, moss green, or light green, as specified. Workmanship: shall be clean and free from lint, dust, spots, scorches, folds, wrinkles, holes and any other defects which may affect the serviceability, durability, or appearance. Sheets shall be flat trimmed square on all sides, with clean and smoot

8、h edges. The blotting paper shall be uniform in color and 2. REGULATORY REOUIREMENTS: The contractor shall certify that the minimum content standard shall be no less than-50% percent recovered materials, including 20% post consumer materials in accordance with Executive Order 12873, section 504 (b),

9、 dated October 20, 1993 (See definitions of post consumer materials and recovered materials in sections 203 and 205). As an alternative to meeting the standards of section 504(a) for all printing and writing papers, the minimum content standard shall be no less than 50% recovered materials that are

10、a waste material byproduct of a finished product other than a paper or textile product which would otherwise be disposed of in a landfill, as determined by the State in which the facility is located, in accordance with Executive Order 12873, section 504 (c), dated October 20, 1993. The Government re

11、serves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 3. Table 1. Physical requirements for blotting paper. ITest Method Basis Weight Burst 308 g/m2 (100 lbs. 19 X 24-500) +/-5% 170 kPa (25

12、psi) average, min. T410 T403 I 4. PUALITY ASSURANCE: a contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the supplier may utilize his own facilities or any commercial laboratory acceptable to

13、 the Government. Unless otherwise specified in the I 2. Licensed by Information Handling ServicesA-A-2192A m 9999974 0363463 955 m A-A-2 19 2 A Packaging, packing and marking shall be as specified in the contract or purchase order. 6. REFERENCED DOCUMENTS: The issue of each document in effect on the

14、 date of the solicitation shall be used to determine compliance with these requirements. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Comercial Item Description, and that the product conforms to the producers own

15、 drawings, specifications, and quality assurance practices. conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The government reserves the right to require proof of Each lot of Blotting paper shall be inspected for conformance to

16、 the requirements herein. accordance with MIL-STD-105 using the plans specified below. Sampling for inspection shall be in A. Visual and Dimensional characteristics - Inspection Level II with an Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be one sheet. Component te

17、sting - The paper stock shall be tested in accordance with referenced TAPPI test methods. Characteristics of the component paper stock tested for conformance to the requirements in Section 1 do not have to be retested under end item testing. A certified test report is evidence that the paper has pas

18、sed the required test. B. 5. PREPARATION FOR DELIVERY: TAPPI test methods are available from: Technical Association of the Pulp and Paper Industry Technology Park/Atlanta, P.O. Box 105113 Atlanta, GA 30348 (404) 446-1400 MIL-STD-105 is available from: STANDARDIZATION DOCUMENTS ORDER DESK Building 4D

19、 700 Robbins Avenue Philadelphia, PA 19111-5094 3. Licensed by Information Handling ServicesA-A-2172A 7979974 0163464 871 A-A-2192A Copies of Executive Order 12873, dated October 20, 1993 may be obtained from: The White House Publications Office New Executive Office Building White House Att: Publica

20、tions Washington, DC. 20500 (202) 395-7332 7. NOTES: (1) Dimensins. (2) Color. (3) Specific packaging, packing, palletization and, marking requirements. B. Item Identifiers/Reference Part bhuab er System (For Catalouinu Use onlv) AA2192 - Al: This example describes a 483 X 610 mm blotting pad in chocolate brown. Color 1 - Chocolate Brown. 2 - Moss Green. 3 - Light Green. SIZE A - 403 mm X 610 mm (19 X 24 inches). B - 610 mm X 925 mm (24 X 38 inches). Militam custodians: NONE PreParina activitv: GSA - FSS 4. Licensed by Information Handling Services