GSA A-A-697 D-1993 PAPER TOILET《卫生纸》.pdf

1、A-A-bq7D 9999974 O345060 5T0 27.7 (17 lb) 55 N/m 5.0 ozf/in METRIC 16.3 T410 (10 lb) 38 N/m T494 3.5 ozf/in A-A-697D Julv 14. 1993 SUPERSEDES A-A-6 9 7 C April 12, 1990 a Distribution Statement A: Approved for public release Distribution is unlimited COMMERCIAL ITEM DESCRIPTION PAPER, TOILET The Gen

2、eral Services Administration has authorized the use of this Commercial Item Description, for all Federal agencies. Scope. toilet tissues in roll form. This commercial item description covers one and two ply 1 Classification. Type 1 - ply toilet tissue 2 - 2 ply toilet tissue 3 - 1 ply, unbleached to

3、ilet tissue 2 Salient Characteristic. Toilet tissues shall be wound evenly on a round paperboard core, made from fibrous, cellulosic material (see 5) and meet the requirements of Table 1, below. Table 1 Characteristic I Type1 I Type2 I ir 1 Basis Weight, g/m2, min. (24 x 36-500), min. Tensile Streng

4、th, Dry CD, 50mm (2 in.), min. 17.9 (11 lb) 44 N/m 4.0 ozf/in Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to General Services Administration, Federal Supply Service, Engineering Branch, 26 Federal Plaza,

5、 New York, N.Y. 10278. I 1 FSC 8540 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-b97D 9999974 01450bl 437 Characteristic Type 1 Type 2 0.01 ml H20, max. 35 sec 5 sec Absorption Time, r Type 3 TAPP1 50 sec T432 Brightness, avg. both sides, min

6、. I Average roll length, min. r 114,300 mm 57,150 mm 114,300 mm (4,500“) (2,250“) (4,500“) Inside dia. of core 65 % 165% I T452 34.925 - 44.45 i (1 3/8 - 1 3/4“) r Roll width 114.3 +/- 3.175 mm (4 1/2 +/- 1/8“) Roll outside diameter 114.3 +/- 3.175 mm (4 1/2 +/- 1/8“) I Perforation interval I 107.95

7、 - 117.475 lm (4 1/4 - 4 5/8“) Length per roll, min. 11,125 mm 55,575 mm 11,125 mm I I (4,375“) I (2,188“) I (4,375“) 2.1 Bleachinq: To obtain an acceptable brightness, a chemical bleaching process may be used. When specified, (See Section 7), the bleaching process shall not include the use of chlor

8、ine, chlorine dioxide, or hypochlorite. Certification of compliance shall be made available upon request by the Government. 2.2 Workmanshir). For Types 1 and 2, toilet tissues shall be clean and free from dirt spots, holes, or tears 1/16 inch or larger, or more than 5 dirt spots, holes, or tears les

9、s than 1/16 inch in one sheet; shives or slivers 1/8 inch or more in length, or more than five shives or slivers less than 1/8 inch in length in one sheet; any foreign matter, undigested paper, or unbleached waste. Toilet tissue shall be uniform in color and shall be trimmed with clean, smooth edges

10、. Sheet formation shall be uniform. Clumps can be evenly and completely separated. For Type 2, the perforations between the two plys shall coincide. of undispersed fibers or thin looking areas are evidence of poor formation. The tissues shall be perforated so that the sheets 3 4 2. Provided by IHSNo

11、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-bq7D 9999974 Ol145062 373 = 2.3 A-A-6 9 7D For Type 3, toilet tissue shall be uniform in color, sheet formation and shall be trimmed with clean, smooth edges. Clumps of undispersed fibers or thin looking areas are e

12、vidence of poor formation. The tissues shall be perforated so that the sheets can be evenly and completely separated. shall be no defects that affect appearance or serviceability. For all types there Certification Clause. tissue shall not clog or interfere with the water flow of waste lines or septi

13、c tank systems, and that it shall be nontoxic and harmless to humans. The supplier shall certify that the toilet 3 Qualitv Assurancec Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspections and tests. to perform any, or all,

14、of these inspections and tests it deems necessary to assure conformance of the product and adequacy of the contractors inspections and tests. tissues shall be inspected for conformance to the requirements specified herein. all tissues of one NSN offered for inspection at the same time. Unless stated

15、 otherwise, sampling shall be in accordance with MIL-STD-105, as described below. The Government reserves the right Each lot of toilet For inspection purposes a lot shall consist of 3.1 Sampling for examination and tests shall be performed in accordance with MIL-STD-105, using the plans as specified

16、 in Table 2, unless otherwise stated. consecutive sheets selected at random from one roll. The sample unit shall be ten Table 2 Examine InsDection Levels AO Ls f% def ectl Visual Defects 5-3 6.5 Workmanship Defects s-3 6.5 Dimensional Defects 5-3 4.0 Preparation for Delivery 5-2 2.5 Paper Characteri

17、stics TAPPI N/A TAPPI TESTS - shall be in accordance with TAPPI T400 for the applicable TAPPI test methods. 3.2 Packaaina, Packina and Markina. Sampling shall be in accordance with MIL-STD-105 with an Inspection Level S-2 and an AQL of 4.0 percent defective. The sample unit shall be one fully prepar

18、ed shipping container. 3. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-697D 9999974 0345063 20T m A-A-6 9 7D 4 Preparation for delivery. 4.1 Packaaina and Packina: Packaging and Packing shall be level A, B or otherwise, as specified in the con

19、tract or order. Level A - Packaging: Each roll of toilet paper shall be fully wrapped with closed ends. toilet paper against damage during shipment, handling and storage. The complete package shall be designed to protect the Packing: Ninety-six (96) rolls of toilet paper shall be packed in a close-f

20、itting fiberboard box to insure delivery at destination, to provide for redistribution by the initial receiving activity, and shall be acceptable by common carrier under National Motor Freight Classification and Uniform Freight Classification. meeting all the requirements for Package No. 215 of NMFC

21、 100-N are acceptable. Fiberboard boxes Level B - Packaging: Each roll of toilet paper shall be furnished unwrapped and crushed. Packing: (Navy Pack) - Forty-eight (48) rolls of toilet paper shall be packed in a close-fitting fiberboard boxes conforming to PPP-B- 1163, Style RSC, Type SWFCI, Grade 2

22、75. The rolls shall be arranged 6 x 4 x 2 or 4 x 3 x 4. The box shall be closed in accordance with PPP-B-636, para. 30.3.2.1.3 (Method V). Note: When the GSA contracting officer has determined that the required use of PPP-B-1163 boxes results in excessive bid prices or unduly restricts competition,

23、he may authorize the use of boxes conforming to PPP-B-636, Type CF, Class Weather-resistant, Variety SW, Grade V3c or W5c; or PPP-B-636, Type CF, Class Domestic, Variety SW, Grade 275 minimum. When Class Domestic boxes are used, each box shall be waterproofed with plastic shrink film. 4.2 Markina. M

24、arking shall be as specified in the contract or order. 5 Remlatory reauirements. For all types, the contractor shall certify that the product offered shall be made of 100% waste paper. The contractor shall also certify that Types 1 and 2 offered shall include a minimum of 20% postconsumer recovered

25、material . . 4. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-b97D = 9999974 OLY5064 146 A-A-697D The contractor shall also certify that Type 3 offered shall include a minimum of 90% postconsumer recovered material. The postconsumer recovered m

26、aterial shall be considered as part of the overall minimum total of 100% waste paper as defined in 40 CFR, Part 250. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract . 6

27、 Referenced Documents. The referenced documents in effect on the date of solicitation shall be used to determine compliance with stated requirements. TAPP1 test methods are available from Technical Association of the Pulp and Paper Industry, Technology Park/Atlanta, P.O. Box 105113, Atlanta, GA 3034

28、8. MIL-STD-105 is available from Naval Publications and Forms Center, 5801 Tabor Avenue, Philadelphia, PA 19120. ASTM specifications are available from American Society for Testing and Materials, 1916 Race St., Philadelphia, PA 19103, Attn: Consumer Service. Title 40. Code of Federal Reuulation, Pro

29、tection of Environment, Part 250, Guideline for Federal Procurement of Paper and Paper Products containing Recovered Materials. Copies of the U.S. Code of Federal Regulations may be purchased with a VISA, Master Card, or prepaid check through: Government Printing Office Washington, D.C. Phone: (202)

30、 783-3238 When ordering, ask for: Title 40, Parts 190-250 Stock Number: 869-013-00-146-0 7 Orderina Data. Purchasers should specify the following: A) Title, number, and date of this specification B) Type of toilet tissue (see 1) C) Whether bleaching without the use of chlorine, chlorine E) Marking (

31、see 4.2) I dioxide, or hypochlorite is required. (see 2.1) D) Packaging and Packing Level (see 4.1) 5. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-697D 9999974 0345065 O2 A-A-697D 7.1 Item IdentifierclReference Part Number Svstem fFor Cataloa

32、incr Use Onlv) . A-A-697-1 :This example describes a 1 ply toilet tissue I Type 1 - 1 ply toilet tissue 2 - 2 ply toilet tissue 3 - 1 ply and unbleached toilet tissue , MILITARY INTERESTS: DOD has waived coordination of this document. PREPARING ACTIVITY: GSA - FSS 6. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-