INTERN CEMS G-5 PART VI-2009 Part VI Paints For Repair& Service General Requirements《第6部分 维护和保养用油漆的一般要求》.pdf

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 Navistar, Inc. AUGUST 2009 Page 1 of 3 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICA

2、TION) NUMBER: CEMS G-5, Part VI General TITLE: Part VI Paints For Repair added CEMS B-50 requirement. 1.0 SCOPE The intent of this specification is to establish acceptable durability and quality levels for the finish on Navistars products and to define requirements and physical properties of the var

3、ious materials used in the painting operation. 2.0 INTRODUCTION This specification is divided into eight parts as follows: Part I, Section A - Product Finishing Requirements Part V - Primers Part I, Section B - Paint Material Requirements Part VI - Paints for Repair phone: 1-800-854-7179; website:

4、. 8.1.1 Color Chips Requests for color chips should be addressed to: Non-Metals Laboratory, Navistar Truck Design and Technology Center, P.O. Box 1109, Ft. Wayne, IN 46801-1109 8.2 ASTM Test Methods ASTM test methods are available from ASTM, 1916 Race Street, Philadelphia, PA 19103 8.3 Federal Test

5、Methods Federal Test Methods are available from the Business Service Center, General Services Administration, Washington, D.C. 20407 9.0 SOURCE APPROVAL AND QUALITY CONTROL 9.1 Supplier Requirements All suppliers to NAVISTAR are required to be registered to ISO 9001 Quality System Requirements. NAVI

6、STAR will also accept TS-16949 registration as long as the supplier can also fulfill all AIAG PPAP (Production Part Approval Process) documentation and approval requirements. Suppliers must maintain their certification with an accredited registrar and must furnish copies of registration certificates

7、 to their Corporate Buyer upon request. For documents referenced in Section 6.0 Property Requirements See Section 8.0 Test Methods Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

8、NUMBER: CEMS G-5, Part VI General TITLE: Part VI Paints For Repair if necessary, the color, by the Navistar paint color number, may be included. When necessary the desired viscosity range should also be included on the purchase order. Example: 0001-61 Repair Paint, Pressurized Containers Viscosity 4

9、5-60 seconds 11.0 PACKING AND SHIPPING Packing, shipping and identification shall be in accordance with Manufacturing Standard MS-D-13. 12.0 TECHNICAL INFORMATION For further information related to the technical content of this specification, contact: Suppliers may purchase controlled copies of this

10、 specification by contacting: Materials Engineering and Technology Dept. Truck Development and Technology Center 2911 Meyer Road Fort Wayne, IN 46803 E-mail: MaterialsEngineeringN IHS Global Inc. 15 Inverness Way East Englewood CO 80112-5776 Phone: 1-800-854-7179 E-mail: AutomotiveIHS.com Website: http:/ Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-