INTERN CEMS GT INDEX-2009 Index of GT Test Methods《GT试验方法的索引》.pdf

1、 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. AUGUST 2009 Page 1 of 2 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECI

2、FICATION) NUMBER: CEMS GT Index TITLE: Index of GT Test Methods CURRENT ISSUE DATE: August 2009 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: June 2009 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may in

3、volve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Chan

4、ge Notice: All active GT Test Methods revised, except GT-7D, GT-7E, GT-9B, GT-24, and GT-31. Index of GT Test Methods Spec NUMBER TITLE DATE Author CEMS-GT-INDEX Index of GT Test Methods August 2009 Materials Engineering CEMS-GT-1A Nonvolatile Content of Paint by Weight August 2009 Materials Enginee

5、ring CEMS-GT-1B Nonvolatile Content of Paint by Volume August 2009 Materials Engineering CEMS-GT-2A & 2B Hiding Power of Paint (Wet & Dry Film) August 2009 Materials Engineering CEMS-GT-3B Storage Stability of Paint August 2009 Materials Engineering CEMS-GT-3C Dip Paint Stability August 2009 Materia

6、ls Engineering CEMS-GT-3F Storage Stability of Paint in Pressurized Cans August 2009 Materials Engineering CEMS-GT-4B Color Stability of Paint August 2009 Materials Engineering CEMS-GT-4C Toughness of Paint August 2009 Materials Engineering CEMS-GT-4D Hardness of Paint August 2009 Materials Engineer

7、ing CEMS-GT-4E Taping and Recoating Properties of Paint August 2009 Materials Engineering CEMS-GT-4F Wrinkling Resistance of Paint August 2009 Materials Engineering CEMS-GT-4G Curing Properties At Three Months August 2009 Materials Engineering CEMS-GT-4H Properties of Catalyzed Paint August 2009 Mat

8、erials Engineering CEMS-GT-4J Bleeding of Paint August 2009 Materials Engineering CEMS-GT-4K Intercoat Compatibility August 2009 Materials Engineering CEMS-GT-5A Adhesion of Paint August 2009 Materials Engineering CEMS-GT-5B Intercoat Adhesion of Paint August 2009 Materials Engineering CEMS-GT-5C Ac

9、celerated Adhesion of Paint August 2009 Materials Engineering CEMS-GT-6A Holdout of Paint August 2009 Materials Engineering CEMS-GT-6B Initial Gloss of Paint August 2009 Materials Engineering CEMS-GT-6D Holdout of Paint (Flash-Dry) August 2009 Materials Engineering CEMS-GT-6E Distinctness of Image (

10、D.O.I.) August 2009 Materials Engineering CEMS-GT-7B Sanding Test for Paint August 2009 Materials Engineering CEMS-GT-7D Corrosion Tests to Evaluate Paint or Painted Parts June 2007 Materials Engineering CEMS-GT-7E Humidity Test for Paint August 2007 Materials Engineering CEMS-GT-7F South Florida Ex

11、posure Test for Paint August 2009 Materials Engineering CEMS-GT-7G Distilled Water Immersion Test for Paint August 2009 Materials Engineering CEMS-GT-7H Xylene Mineral Spirits Immersion Test for Paint August 2009 Materials Engineering CEMS-GT-7J Antifreeze Immersion Test for Paint August 2009 Materi

12、als Engineering CEMS-GT-7K Engine Oil Immersion Test for Paint August 2009 Materials Engineering CEMS-GT-8 Heat Resistant Properties of Paint August 2009 Materials Engineering CEMS-GT-9A Machinability of Painted Surface August 2009 Materials Engineering CEMS-GT-9B Solvent Resistance of Paint August

13、2001 Materials Engineering Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NUMBER: CEMS GT INDEX TITLE Index of GT Test Methods CURRENT ISSUE DATE: AUGUST 2009 This document is re

14、stricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. AUGUST 2009 Page 2 of 2 Index of GT Test Methods (continued) Spec NUMBER TITLE DATE Author CEMS-GT-10

15、 Heated Paint Stability Test August 2009 Materials Engineering CEMS-GT-11 Cracking Resistance of Paint August 2009 Materials Engineering CEMS-GT-12 Mar Resistance of Paint August 2009 Materials Engineering CEMS-GT-13 Panel Preparation August 2009 Materials Engineering CEMS-GT-14A Xylol Rubbing Test

16、August 2009 Materials Engineering CEMS-GT-14B Acid Spot Test August 2009 Materials Engineering CEMS-GT-14C Cold Crack Test August 2009 Materials Engineering CEMS-GT-15 Ferroxyl Test August 2009 Materials Engineering CEMS-GT-16 Chromic Acid Compatibility Test August 2009 Materials Engineering CEMS-GT

17、-17 Oil Compatibility of Paint August 2009 Materials Engineering CEMS-GT-18 Dry Film Conductivity of A Primer August 2009 Materials Engineering CEMS-GT-19 Early Water Resistance of Sealers and Paints August 2009 Materials Engineering CEMS-GT-20 Surface Sealing August 2009 Materials Engineering CEMS-

18、GT-21 Curing Properties on Receipt - Air Drying August 2009 Materials Engineering CEMS-GT-22 Curing Properties on Receipt - Forced Dry or Baking August 2009 Materials Engineering CEMS-GT-23 Determination of Phosphate Coating Weight on Ferrous Substrate August 2009 Materials Engineering CEMS-GT-24 Ph

19、osphate System Compatibility April 2009 Materials Engineering CEMS-GT-25 Chip Resistance of Paint August 2009 Materials Engineering CEMS-GT-26 Glycol Compatibility of Paint August 2009 Materials Engineering CEMS-GT-27 Application Heat Resistance August 2009 Materials Engineering CEMS-GT-28 Maximum A

20、llowable Paint Chipping Damage August 2009 Materials Engineering CEMS-GT-29 Orange Peel-Reflected Light Intensity Measurement August 2009 Materials Engineering CEMS-GT-30 Chipping and Salt Spray Resistance August 2009 Materials Engineering CEMS-GT-31 Accelerated Weathering of Non-metallic Materials

21、June 2009 Materials Engineering OBSOLETE GT Test Methods Spec NUMBER TITLE Replaced by: Date of Deletion GT-3A Dilution Stability of Paint FSTM 4203.1 1973 GT-3D Brushing Properties of Paint FSTM 4321.1 1973 GT-3E Spraying Properties of Paint FSTM 4331.1 1973 GT-4A Curing Properties on Receipt ASTM D 1640 1973 GT-6C Color FSTM 4250 1973 GT-7A Gravelometer Test for Paint SAE J400 1968 GT-7C Immersion CEMS GT-7G, 7H, 7J 1968 Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-