INTERN ESP EM-39 102-PP-2008 Tab Weld Nuts Preferred Parts Metric Series (Noun Code 5780)《焊接螺母标签 首选零件公制系列(名词编码5780)》.pdf

1、 For General Specifications, see ESP-EM-39.101-GS. This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2008 by Navistar, Inc. JULY 2008 Page 1 of 2 NAVISTAR,

2、 INC. Engineering Standard Parts NUMBER ESP-EM-39.102-PP TITLE: Tab Weld Nuts Preferred Parts Metric Series (Noun Code 5780) CURRENT ISSUE DATE: July 2008 WRITTEN/REVIEWED BY: Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPERSEDES ISSUE OF: September 2000 PRINTED COPIES

3、OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Added 40377R1 (M8, Style 5M, STL). Replaced International Truck and Engine Corporation with Navistar, Inc. per corporate directive. Dimensions in millimeters: STYLE 1M A B C D E H Nominal Width Length Thickness Pilot Thickness Pil

4、ot Diameter Pilot C/L to End Rec Hole in Plate, Size Max Min Max Min Max Min Max Min Max Min Max Min Nom M 3.5 X 0.6 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 5 4.4 5.2 4.3 5.2 M 4 X 0.7 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 5.4 4.9 5.2 4.3 5.6 M 5 X 0.8 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 6.2 5.6 5.2 4.3 6

5、.4 M 6 X 1 13.4 12.4 21 20.1 3.1 2.6 1.5 1.1 7.8 7.2 6.8 6 8 M 8 X 1.25 16.4 15.6 29 28.1 3.8 3.3 2.3 1.9 9.4 8.8 9.1 8.3 9.6 M10 X 1.5 16.4 15.6 29 28.1 3.8 3.3 2.7 2.3 11.4 10.8 9.1 8.3 12 Dimensions in millimeters: STYLE 2M A B C D E Width Length Thickness Pilot Pilot Rec Hole Nominal Thickness D

6、iameter in Plate, Size Max Min Max Min Max Min Max Min Max Min Nom M 3.5 X 0.6 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 5 4.4 5.2 M 4 X 0.7 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 5.4 4.9 5.6 M 5 X 0.8 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 6.2 5.6 6.4 M 6 X 1 13.4 12.4 21 20.1 3.1 2.6 1.5 1.1 7.8 7.2 8 M 8 X 1

7、.25 16.4 15.6 29 28.2 3.8 3.3 2.3 1.9 9.4 8.8 9.6 M10 X 1.5 16.4 15.6 29 28.2 3.8 3.3 2.7 2.3 11.4 10.8 12 Dimensions in millimeters: STYLE 3M A B C D E F G H Width Length Thickness Pilot Pilot ProJ. Proj. Pilot C/L Rec Hole Nominal Thickness Diameter Height Diameter to End in Plate, Size Max Min Ma

8、x Min Max Min Max Min Max Min Max Min Max Min Max Min Nom M 3.5 X 0.6 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 5 4.4 0.56 0.45 4.9 4.6 5.2 4.3 5.2 M 4 X 0.7 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 5.4 4.9 0.56 0.45 4.9 4.6 5.2 4.3 5.6 M 5 X 0.8 11.4 10.8 16.4 15.5 2.5 2.3 1.1 0.7 6.2 5.6 0.56 0.45 4.9 4.6 5.

9、2 4.3 6.4 M 6 X 1 13.4 12.4 21 20.1 3.1 2.6 1.5 1.1 7.8 7.2 0.72 0.58 5.7 5.4 6.8 6.2 8 M 8 X 1.25 16.4 15.6 29 28.1 3.8 3.3 2.3 1.9 9.4 8.8 0.82 0.71 8 7.6 9.1 8.3 9.6 M10 X 1.5 16.4 15.6 29 28.1 3.8 3.3 2.7 2.3 11.4 10.8 0.82 0.71 8 7.6 9.1 8.3 12 Copyright Navistar International Corporation Provi

10、ded by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NUMBER: ESP-EM-39.102-PP TITLE: Tab Weld Nuts Preferred Parts CURRENT ISSUE DATE: July 2008 For General Specifications, see ESP-EM-39.101-GS. This document is restricted and may not

11、 be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2008 by Navistar, Inc. JULY 2008 Page 1 of 2 Dimensions in millimeters: STYLE 4M A B C D E F G Width Length Thickness Pilot Thickness Pilot Diam

12、eter Proj. Height Proj. Diameter Rec Hole Nominal in Plate, Size Max Min Max Min Max Min Max Min Max Min Max Min Max Min Nom M 3.5 X 0.6 9.9 9.3 16.4 15.5 2.5 2.3 1.1 0.7 5 4.4 0.56 0.45 4.9 4.6 5.2 M 4 X 0.7 9.9 9.3 16.4 15.5 2.5 2.3 1.1 0.7 5.4 4.9 0.56 0.45 4.9 4.6 5.6 M 5 X 0.8 9.9 9.3 16.4 15.5

13、 2.5 2.3 1.1 0.7 6.2 5.6 0.56 0.45 4.9 4.6 6.4 M 6 X 1 13.4 12.4 21 20.1 3.1 2.6 1.5 1.1 7.8 7.2 0.72 0.58 5.7 5.4 8 M 8 X 1.25 16.4 15.6 25.8 24.6 3.6 3.3 2.3 1.9 9.4 8.8 0.82 0.71 8 7.6 9.6 M10 X 1.5 16.4 15.6 25.8 24.6 3.6 3.3 2.7 2.3 11.4 10.8 0.82 0.71 8 7.6 12 STYLE 5M Dimensions in millimeter

14、s: A B C D E H J Width Length Thickness Pilot Thickness Pilot Diameter Pilot C/L to End Target Diameter Rec Hole Nominal in Plate, Size Max Min Max Min Max Min Max Min Max Min Max Min Max Min Nom M 3.5 X 0.6 9.9 9.3 18.4 17.6 2.5 2.3 1.1 0.7 5 4.4 5.2 4.3 6.7 6 5.2 M 4 X 0.7 9.9 9.3 18.4 17.6 2.5 2.

15、3 1.1 0.7 5.4 4.9 5.2 4.3 6.7 6 5.6 M 5 X 0.8 11.4 10.8 20.4 19.6 2.5 2.3 1.1 0.7 6.2 5.6 5.2 4.3 7.5 6.7 6.4 M 6 X 1 11.4 10.8 24.4 23.6 2.5 2.3 1.5 1.1 7.8 7.2 6.8 6.2 7.5 6.7 8 M 8 X 1.25 11.4 10.8 28.4 27.6 3.3 3.1 2.3 1.9 9.4 8.8 9.1 8.3 7.5 6.7 9.6 Nominal Size Style Material Part Number M4 2M STL 31179R1 M5 2M STL 31205R1 M6 1M STL 31218R1 M8 1M STL 30710R1 M8 2M STL 31105R1 M8 5M STL 40377R1 M10 2M STL 31233R1 Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-