INTERN ESP L-3 221-NPP-2009 Ball Sleeve Tube Components - Non-Preferred Parts《球形套管部件 非首选配件》.pdf

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. JANUARY 2009 Page 1 of 6 NAVISTAR, INC. Engineering Standard Parts NUMBER: ESP-L-3

2、.221-NPP TITLE: Ball Sleeve Tube Components - Non-Preferred Parts CURRENT ISSUE DATE: January 2009 WRITTEN/REVIEWED BY:Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPERSEDES ISSUE OF: August 2006 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Chang

3、e Notice: International Truck and Engine Corporation changed to Navistar, Inc. per corporate directive. Ball Sleeve External Thread 90 Degree Elbow assembly part number 140304 corrected to include Elbow 140303 instead of 140302. BALL SLEEVE TUBE CONNECTORS (NOUN CODE 1950) Use Inverted Flare in ESP-

4、L-6.121-PP or Spherical Sleeve in ESP-L-9.121-PP. Dimensions in inches: Tubing OD 1/8 3/16 1/4 5/16 5/16 3/8 7/16 1/2 5/8 3/4 B Dryseal Thread 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 C Straight Thread 5/16-24 3/8-24 7/16-24 1/2-24 1/2-24 9/16-24 5/8-24 11/16-20 13/16-18

5、 1-18 Maximum Pitch Dia .2843 .3468 .4093 .4717 .4717 .5342 .5967 .6537 .7750 .9625 Minimum Pitch Dia .2806 .3430 .4055 .4678 .4678 .5303 .5927 .6494 .7704 .9578 Minimum Full Thread 3/16 7/32 1/4 9/32 9/32 5/16 11/32 3/8 7/16 1/2 E Hexagon Width 7/16 7/16 7/16 1/2 9/16 9/16 5/8 11/16 7/8 1 S Hole Di

6、ameter .094 .125 .188 .250 .250 .312 .312 .406 .500 .562 D Diameter (+/- 002) .134 .195 .260 .323 .323 .387 .451 .516 .644 .772 P Length 3/8 3/8 3/8 3/8 9/16 9/16 9/16 9/16 3/4 3/4 R Hexagon Thickness 5/32 3/16 3/16 3/16 - 7/32 7/32 7/32 1/4 5/16 I End to Hexagon 1/4 9/32 5/16 11/32 11/32 3/8 13/32

7、7/16 1/2 9/16 K Depth 3/16 7/32 1/4 9/32 9/32 5/16 11/32 3/8 3/8 7/16 F Length 25/32 27/32 7/8 29/32 1-3/32 1-5/32 1-3/16 1-7/32 1-1/2 1-5/8 Finish - Material PART NUMBERS Plain Brass 140284 121711 114626 114640 144376 125733 For General Specifications, see ESP-L-1.101-GS. NOT-PREFERRED FOR NEW DESI

8、GN Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NUMBER: ESP-L-3.221-NPP TITLE: Ball Sleeve Tube Components - Non-Preferred Parts CURRENT ISSUE DATE: January 2009 This document

9、is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. JANUARY 2009 Page 2 of 6 Use Inverted Flare in ESP-L-6.121-PP or Spherical Sleeve in ESP-L-9.121

10、-PP. UNDERCUT OPTIONAL Dimensions in inches: Tubing OD 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 B Straight Thread 5/16-24 3/8-24 7/16-24 1/2-24 9/16-24 5/8-24 11/16-20 13/16-18 1- 18 Maximum Pitch Dia .2843 .3468 .4093 .4717 .5342 .5967 .6537 .7750 .9625 Minimum Pitch Dia .2806 .3430 .4055 .4678 .5303

11、 .5927 .6494 .7704 .9578 Minimum Full Thread 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 E Hexagon Width 5/16 3/8 7/16 1/2 9/16 5/8 11/16 13/16 1 S Hole Diameter .094 .125 .188 .250 .312 .312 .406 .500 .562 D Diameter (.002) .134 .195 .260 .323 .387 .451 .516 .644 .772 R Hexagon Thickness 5/32 3/16 3

12、/16 3/16 7/32 7/32 7/32 1/4 5/16 I End to Hexagon 1/4 9/32 5/16 11/32 3/8 13/32 7/16 1/2 9/16 K Depth 3/16 7/32 1/4 9/32 5/16 11/32 3/8 3/8 7/16 F1 Length 21/32 3/4 13/16 7/8 31/32 1-1/32 1-3/32 1-1/4 1-7/16 Finish - Material PART NUMBERS Plain Brass 140295 115056 115058 140297 For General Specifica

13、tions, see ESP-L-1.101-GS. For assembly numbers, see page 5. NOT-PREFERRED FOR NEW DESIGN Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NUMBER: ESP-L-3.221-NPP TITLE: Ball Sleev

14、e Tube Components - Non-Preferred Parts CURRENT ISSUE DATE: January 2009 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. JANUARY 2

15、009 Page 3 of 6 BALL SLEEVE TUBE 90 ELBOWS (Noun Code - 2940) Use Inverted Flare in ESP-L-6.121-PP or Spherical Sleeve in ESP-L-9.121-PP. (Noun Code - 2940) Tubing OD 1/8 3/16 1/4 5/16 5/16 3/8 7/16 1/2 5/8 3/4 B Dryseal Thread 1/8-27 1/8-27 1/8-27 1/8-27 1/4-18 1/4-18 1/4-18 3/8-18 1/2-14 1/2-14 C

16、Straight Thread 5/16-24 3/8-24 7/16-24 1/2-24 1/2-24 9/16-24 5/8-24 11/16-20 13/16-18 1-18 Maximum Pitch Dia .2843 .3468 .4093 .4717 .4717 .5342 .5967 .6537 .7750 .9625 Minimum Pitch Dia .2806 .3430 .4055 .4678 .4678 .5303 .5927 .6494 .7704 .9578 Minimum Full Thread 3/16 7/32 1/4 9/32 9/32 5/16 11/3

17、2 3/8 7/16 1/2 D Hole Diameter .094 .125 .188 .250 .250 .312 .312 .406 .500 .562 X Diameter (.002) .134 .195 .260 .323 .323 .387 .451 .516 .644 .772 R Hole Diameter, Max 7/32 7/32 7/32 15/64 5/16 11/32 11/32 13/32 9/16 9/16 J Length 3/8 3/8 3/8 3/8 9/16 9/16 9/16 9/16 3/4 3/4 K Depth 3/16 7/32 1/4 9

18、/32 9/32 5/16 11/32 3/8 3/8 7/16 E Center to End 5/8 5/8 5/8 5/8 11/16 3/4 27/32 15/16 1-1/16 1-3/16 F Center to end 11/16 11/16 3/4 3/4 27/32 15/16 1 1-1/8 1-5/16 1-1/2 Finish - Material PART NUMBERS Plain Brass 140303 121370 114632 140305 144466 For General Specifications, see page ESP-L-1.101-GS.

19、 For assembly numbers, see page 5. NOT-PREFERRED FOR NEW DESIGN Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NUMBER: ESP-L-3.221-NPP TITLE: Ball Sleeve Tube Components - Non-Pr

20、eferred Parts CURRENT ISSUE DATE: January 2009 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. JANUARY 2009 Page 4 of 6 BALL SLEEV

21、E (Noun Code - 8000) Use Inverted Flare in ESP-L-6.121-PP or Spherical Sleeve in ESP-L-9.121-PP. L L L L L L L L L L L L Dimensions in inches: Tubing OD 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 D Length .188 .219 .250 .250 .250 .312 .375 .375 .438 B Hole Diameter .130 .193 .257 .320 .383 .447 .511 .63

22、8 .765 C Outside Diameter .188 .266 .344 .406 .469 .531 .594 .719 .875 U End Diameter .138 .201 .266 .329 .393 .457 .522 .650 .778 Finish - Material PART NUMBERS Plain Brass 121322 120488 114628 114631 114624 120130 141521 125654 ZN Brass Dimensions in inches: Tubing OD 1/8 3/16 1/4 5/16 3/8 7/16 1/

23、2 5/8 3/4 B Straight Thread 5/16-24 3/8-24 7/16-24 1/2-24 9/16-24 5/8-24 11/16-20 13/16-18 1-18 Maximum Pitch Dia .2902 .3528 .4153 .4780 .5405 .6031 .6606 .7824 .9701 Minimum Pitch Dia .2854 .3479 .4104 .4729 .5354 .5979 .6550 .7764 .9639 J Full Thread Length .188 .219 .250 .250 .281 .312 .406 .406

24、 .438 C Hole Diameter .130 .193 .257 .320 .383 .447 .511 .638 .765 F Thickness .375 .406 .438 .438 .469 .500 .625 .625 .688 D Hexagon Width .375 .438 .500 .562 .625 .688 .812 .938 1.188 Finish - Material PART NUMBERS Plain Brass 121220 120487 114627 114630 140287 120131 144409 ZN Brass For General S

25、pecifications, see page ESP-L-1.101-GS. NOT-PREFERRED FOR NEW DESIGN Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NUMBER: ESP-L-3.221-NPP TITLE: Ball Sleeve Tube Components - N

26、on-Preferred Parts CURRENT ISSUE DATE: January 2009 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. JANUARY 2009 Page 5 of 6 SPECI

27、AL TUBE FITTING ASSEMBLIES Use Inverted Flare in ESP-L-6.121-PP or Spherical Sleeve in ESP-L-9.121-PP. BALL SLEEVE TUBE CONNECTORS PART NUMBERS - BRASS, PLAIN Tubing OD 1/8 3/16 1/4 5/16 5/16 3/8 7/16 1/2 5/8 3/4 Connector Sleeve Nut 140284 121322 121220 121711 120488 120487 114626 114628 114627 114

28、629 114631 114630 114640 114631 114630 140286 114624 140287 120129 120130 120131 144376 141521 141520 125733 125654 144409 Assembly Number 140285 140353 114795 114796 114806 140288 120132 PART NUMBERS - BRASS, PLAIN QTY Tubing OD 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1 2 2 Union Sleeves Nuts 140295

29、 120488 120487 115056 114628 114627 115058 114631 114630 140297 114624 140287 140301 120130 120131 144377 141521 141520 Assembly Number 140296 115055 115057 140298 140302 144392 PART NUMBERS - BRASS, PLAIN Tubing OD 1/8 3/16 1/4 5/16 5/16 3/8 7/16 1/2 5/8 3/4 Elbow Sleeve Nut 140303 121322 121220 12

30、1370 120488 120487 114632 114628 114627 114633 114631 114630 114927 114631 114630 140305 114624 140287 144379 141521 141520 144466 125654 144409 Assembly Number 140304 114798 114797 114930 140306 For General Specifications, see page ESP-L-1.101-GS. For Dimensions, see pages 1 to 4. NOT-PREFERRED FOR

31、 NEW DESIGN Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NUMBER: ESP-L-3.221-NPP TITLE: Ball Sleeve Tube Components - Non-Preferred Parts CURRENT ISSUE DATE: January 2009 This

32、document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. JANUARY 2009 Page 6 of 6 Use Inverted Flare in ESP-L-6.121-PP or Spherical Sleeve in ES

33、P-L-9.121-PP. PART NUMBERS - BRASS, PLAIN Tubing OD 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1 2 2 Tee Sleeves Nuts 140329 121322 121220 121712 120488 120487 114939 114628 114627 120167 114631 114630 140331 114624 140287 140335 120130 120131 144386 141521 141520 144387 125654 144409 Assembly Number 11

34、4940 PART NUMBERS - BRASS, PLAIN Tubing OD 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1 3 3 Tee Sleeves Nuts 140337 121322 121220 140339 120488 120487 114635 114628 114627 114636 114631 114630 140341 114624 140287 140343 120430 140290 120270 120130 120131 144384 141521 141520 144385 125654 144409 Assemb

35、ly Number 140338 114799 For Dimensions, see pages 1 to 4. For General Specifications, see page ESP-L-1.101-GS. NOT-PREFERRED FOR NEW DESIGN Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-