INTERN ESP S-41 102-PP-2009 Rubber Grommets Preferred Parts (Noun Code 4020)《橡胶垫圈 首选配件(名词代码4020)》.pdf

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2009 by Navistar, Inc. OCTOBER 2009 Page 1 of 1 Dimensions in inches: Size Number 1 2 3 4 5 6 7 8 9 10 No

2、minal Dia 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2 5/8 5/8 A Hole Diameter .266 .250 .328 .328 .391 .391 .500 .516 .641 .625 C Width of Groove .062 .188 .062 .188 .062 .188 .062 .188 .062 .156 E Thickness .312 .438 .312 .438 .312 .438 .312 .438 .312 .438 B Dia of Groove .469 .500 .531 .531 .656 .656 .812 .

3、844 .969 .938 D Outside Dia .625 .625 .719 .719 .844 .844 1.062 1.062 1.188 1.188 Style PART NUMBERS - RUBBER, PLAIN Not Cut 117957 117958 117959 117960 117961 117962 117963 117964 117965 117966 Diagonal Cut 144226 140711 134252 109390 128157 120302 120879 120408 120013 118833 Straight Cut 443850 AD

4、DITIONAL SIZES A Hole Diameter 3/16 1/4 1/4 5/16 5/16 3/8 1/2 1/2 1/2 1/2 C Width of Groove .125 .125 .062 .062 .062 .062 .062 .062 .062 .094 E Thickness .250 .375 .375 .375 .250 .281 .250 .250 .250 .344 B Dia of Groove .312 .469 .750 .750 .875 .500 .750 .938 1.250 .750 D Outside Dia .438 .625 1.000

5、 1.000 1.375 .688 .875 1.625 1.500 .875 Style PART NUMBERS RUBBER, PLAIN Not Cut 113751 113752 112734 112743 628619R1 Diagonal Cut 23406R1 187540 117971 117972 117973 117974 144227 144228 27830R1 40364R1 ADDITIONAL SIZES A Hole Diameter 9/16 5/8 3/4 7/8 1 1 1-1/8 1-1/4 1-1/2 C Width of Groove .062 .

6、062 .062 .125 .250 .062 .062 .125 .062 E Thickness .313 .500 .375 .750 .500 .438 .438 .500 .438 B Dia of Groove .750 1.000 1.062 1.250 1.250 1.375 1.375 2.50 1.75 D Outside Dia 1.000 1.375 1.375 1.562 1.500 1.750 1.75 2.875 2.125 Style PART NUMBERS RUBBER, PLAIN Not Cut 40414R1 144229 112745 40361R1

7、 187954 40301R1 587215R1 Diagonal Cut 40413R1 117975 127979 142350 19351R1 28627R1 40300R1 For General Specifications, see ESP-S-41.101-GS. NAVISTAR, INC. Engineering Standard Parts NUMBER: ESP-S-41.102-PP TITLE: Rubber Grommets Preferred Parts (Noun Code 4020) CURRENT ISSUE DATE: October 2009 WRITT

8、EN/REVIEWED BY: Corporate Technical Standards APPROVED BY: Corporate Technical Standards SUPERSEDES ISSUE OF: January 2008 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION Change Notice: Added 40413R1 (9/16 x .062 x .313 x 0.75 x 1. 00 grommet Diagonal cut) and 40414R1 (9/16 x .

9、062 x .313 x 0.75 x 1. 00 grommet Not cut). International Truck and Engine Corporation replaced with Navistar, Inc. per corporate directive. Copyright Navistar International Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-