1、 NOTICE OF COPYRIGHT This is a copyright document and may not be copied or distributed in any form or manner without the permission of ISA. This copy of the document was made for the sole use of the person to whom ISA provided it and is subject to the restrictions stated in ISAs license to that pers
2、on. It may not be provided to any other person in print, electronic, or any other form. Violations of ISAs copyright will be prosecuted to the fullest extent of the law and may result in substantial civil and criminal penalties. AMERICAN NATIONAL STANDARD ANSI/ISA-75.08.01-2002 (R2007)Formerly ISA-7
3、5.03-1992Face-to-Face Dimensions for IntegralFlanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) Approved 23 April 2007ANSI/ISA-75.08.01-2002 (R2007) Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) ISBN: 9
4、78-1-934394-14-4 Copyright 2007 by ISA. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic mechanical, photocopying, recording, or otherwise)
5、, without the prior written permission of the Publisher. ISA 67 Alexander Drive P.O. Box 12277 Research Triangle Park, North Carolina 27709 3 ANSI/ISA-75.08.01-2002 (R2007) Preface This preface, as well as all footnotes and annexes, is included for information purposes and is not part of ANSI/ISA-75
6、.08.01-2002 (R2007). The standards referenced within this document may contain provisions which, through reference in this text, constitute requirements of this document. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements b
7、ased on this document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated within this document. Members of IEC and ISO maintain registers of currently valid International Standards. ANSI maintain registers of currently valid U.S. National Sta
8、ndards. This document has been prepared as part of the service of ISA toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and a
9、sks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: standardsisa.org. The ISA Standards and Practices Department is aware of the growing need for
10、attention to the metric system of units in general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware of the benefits to USA users of ISA standards of incorporating suitable references to the SI (and the metric
11、system) in their business and professional dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, recommended practices, and technical reports to the greatest extent possible. Standard for Use of the Int
12、ernational System of Units (SI): The Modern Metric System, published by the American Society for Testing & Materials as IEEE/ASTM SI 10-97, and future revisions, will be the reference guide for definitions, symbols, abbreviations, and conversion factors. It is the policy of ISA to encourage and welc
13、ome the participation of all concerned individuals and interests in the development of ISA standards, recommended practices, and technical reports. Participation in the ISA standards-making process by an individual in no way constitutes endorsement by the employer of that individual, of ISA, or of a
14、ny of the standards, recommended practices, and technical reports that ISA develops. CAUTION ISA ADHERES TO THE POLICY OF THE AMERICAN NATIONAL STANDARDS INSTITUTE WITH REGARD TO PATENTS. IF ISA IS INFORMED OF AN EXISTING PATENT THAT IS REQUIRED FOR USE OF THE STANDARD, IT WILL REQUIRE THE OWNER OF
15、THE PATENT TO EITHER GRANT A ROYALTY-FREE LICENSE FOR USE OF THE PATENT BY USERS COMPLYING WITH THE STANDARD OR A LICENSE ON REASONABLE TERMS AND CONDITIONS THAT ARE FREE FROM UNFAIR DISCRIMINATION. EVEN IF ISA IS UNAWARE OF ANY PATENT COVERING THIS STANDARD, THE USER IS CAUTIONED THAT IMPLEMENTATIO
16、N OF THE STANDARD MAY REQUIRE USE OF TECHNIQUES, PROCESSES, OR MATERIALS COVERED BY PATENT RIGHTS. ISA TAKES NO POSITION ON THE EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS THAT MAY BE INVOLVED IN IMPLEMENTING THE STANDARD. ISA IS NOT RESPONSIBLE FOR IDENTIFYING ALL PATENTS THAT MAY REQUIRE A LICENSE
17、BEFORE IMPLEMENTATION OF THE STANDARD OR FOR INVESTIGATING THE VALIDITY OR SCOPE OF ANY PATENTS BROUGHT TO ITS ATTENTION. THE USER SHOULD CAREFULLY INVESTIGATE RELEVANT PATENTS BEFORE USING THE STANDARD FOR THE USERS INTENDED APPLICATION. ANSI/ISA-75.08.01-2002 (R2007) - 4 - HOWEVER, ISA ASKS THAT A
18、NYONE REVIEWING THIS STANDARD WHO IS AWARE OF ANY PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE STANDARD NOTIFY THE ISA STANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER. ADDITIONALLY, THE USE OF THIS STANDARD MAY INVOLVE HAZARDOUS MATERIALS, OPERATIONS OR EQUIPMENT. THE STANDARD CANNOT
19、 ANTICIPATE ALL POSSIBLE APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE IN HAZARDOUS CONDITIONS. THE USER OF THIS STANDARD MUST EXERCISE SOUND PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USERS PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE
20、APPLICABILITY OF ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH PRACTICES BEFORE IMPLEMENTING THIS STANDARD. THE USER OF THIS DOCUMENT SHOULD BE AWARE THAT THIS DOCUMENT MAY BE IMPACTED BY ELECTRONIC SECURITY ISSUES. THE COMMITTEE HAS NOT YET ADDRESSED THE POTENTIAL ISSUES
21、 IN THIS VERSION. The following people served as members of ISA Committee SP75.08 and approved ANSI/ISA-75.08.01-2002: NAME COMPANY W. Weidman, Chairman Parsons Energy & Chemicals Group H. Baumann HB Services Partners LLC G. Borden Consultant R. Brodin Consultant F. Cain Flowserve Corporation R. Cho
22、wn OTEC Process Systems Inc. B. Hatton Dezurik J. Reed Consultant H. Sonderegger Anvil International Inc. The following people served as members of ISA Committee SP75 and approved ANSI/ISA-75.08.01-2002: NAME COMPANY D. Buchanan, Chairman Consultant W. Weidman, Managing Director Parsons Energy & Che
23、micals Group K. Schoonover, Secretary Con-Tek Valves Inc. A. Abromaitis Red Valve Co Inc. H. Backinger Consultant G. Barb Consultant H. Baumann HB Services Partners LLC J. Beall* Emerson Process Management W. Black Curtiss-Wright Flow Control Corporation G. Blackwell Industrial Valve H. Boger* Mason
24、eilan Dresser G. Borden Consultant S. Boyle Metso Automation USA Inc. R. Brodin* Emerson Process Management F. Cain Flowserve Corporation A. Engels Praxair Inc. H. Fuller Valvcon Corporation J. George Richards Industries 5 ANSI/ISA-75.08.01-2002 (R2007) L. Griffith Consultant J. Jamison Bantrel Inc.
25、 R. Jeanes TXU Electric J. Kersh M W Kellogg Company C. Langford Cullen G. Langford Inc. W. Lestan* Masoneilan Dresser A. Libke* SPX Valves & Controls DeZurik Products R. Louviere Services Unlimited J. McCaskill Power Chokes A. McCauley Chagrin Valley Controls Inc. R. McEver* Emerson Valve Automatio
26、n H. Miller Control Components Inc. T. Molloy CMES Inc. L. Ormanoski Frick Company J. Ozol Northern States Power W. Rahmeyer Utah State University J. Reed Norriseal A. Shea* SPX Valves & Controls DeZurik Products E. Skovgaard Leslie Controls Inc. H. Sonderegger Anvil International Inc. _ * One vote
27、per company. ANSI/ISA-75.08.01-2002 was approved for publication by the ISA Standards and Practices Board on 26 September 2002. NAME COMPANY M. Zielinski Emerson Process Management D. Bishop David N Bishop, Consultant D. Bouchard Paprican M. Cohen Consultant M. Coppler Ametek, Inc. B. Dumortier Schn
28、eider Electric W. Holland Southern Company E. Icayan ACES Inc A. Iverson Ivy Optiks R. Jones Dow Chemical Company V. Maggioli Feltronics Corporation T. McAvinew I&C Engineering, LLC A. McCauley, Jr. Chagrin Valley Controls, Inc. G. McFarland Westinghouse Process Control Inc. R. Reimer Rockwell Autom
29、ation J. Rennie Factory Mutual Research Corporation H. Sasajima Yamatake Corporation I. Verhappen Syncrude Canada Ltd. R. Webb POWER Engineers W. Weidman Parsons Energy & Chemicals Group J. Weiss KEMA Consulting M. Widmeyer Stanford Linear Accelerator Center R. Wiegle CANUS Corporation C. Williams E
30、astman Kodak Company G. Wood Graeme Wood Consulting ANSI/ISA-75.08.01-2002 (R2007) - 6 - The following people served as members of ISA Subcommittee SP75.08 and reaffirmed ANSI/ISA-75.08.01-2002 (R2007): NAME COMPANY W. Weidman, Chair Worley Parsons H. Baumann Consultant G. Borden Consultant F. Cain
31、Flowserve Corporation R. Chown Otec Process Systems Inc. R. Duimstra Fisher Controls International Inc. V. Mezzano Fluor Corporation J. Reed Consultant J. Young Dow Chemical Company The following people served as members of ISA Committee SP75 and reaffirmed ANSI/ISA-75.08.01-2002 (R2007): NAME COMPA
32、NY J. Young, Chair Dow Chemical Company W. Weidman, Managing Director Worley Parsons H. Backinger Consultant H. Baumann Consultant J. Beall Emerson Process Management W. Black Curtiss-Wright Flow Control Corporation H. Boger Masoneilan Dresser G. Borden Consultant S. Boyle Metso Automation USA Inc.
33、J. Broyles Enbridge Pipelines Inc. F. Cain Flowserve Corporation W. Cohen KBR R. Duimstra Fisher Controls International Inc. J. Faramarzi Control Components Inc. J. George Richards Industries H. Hoffmann Samson AG J. Jamison OPTI Canada Inc. R. Jeanes TXU Electric C. Langford Cullen G Langford Inc.
34、A. Libke DeZURIK Water Controls G. Liu Syncrude Canada Ltd. J. McCaskill Power Chokes A. McCauley Chagrin Valley Controls Inc. R. McEver Consultant V. Mezzano Fluor Corporation T. Molloy CMES Inc. L. Ormanoski York Process Systems J. Ozol NMC Prairie Island Nuclear Plant W. Rahmeyer Utah State Unive
35、rsity J. Reed Consultant E. Skovgaard Control Valve Solutions 7 ANSI/ISA-75.08.01-2002 (R2007) This standard was approved for reaffirmation by the ISA Standards and Practices Board on 5 April 2007: NAME COMPANY T. McAvinew, Vice President Jacobs Engineering Group M. Coppler Ametek Inc. B. Dumortier
36、Schneider Electric D. Dunn Aramco Services Company W. Holland Consultant E. Icayan ACES Inc. J. Jamison Husky Energy Inc. K. Lindner Endress+Hauser Process Solutions AG V. Maggioli Feltronics Corporation A. McCauley Chagrin Valley Controls Inc. G. McFarland Emerson Process Mgmt Power & Water Solutio
37、ns R. Reimer Rockwell Automation N. Sands E I du Pont H. Sasajima Yamatake Corporation T. Schnaare Rosemount Inc. J. Tatera Tatera & Associates Inc. I. Verhappen MTL Instrument Group R. Webb Robert C Webb PE W. Weidman Worley Parsons J. Weiss Applied Control Solutions LLC M. Widmeyer Consultant M. Z
38、ielinski Emerson Process Management This page intentionally left blank. 9 ANSI/ISA-75.08.01-2002 (R2007) Contents 1 Scope.11 2 Purpose11 3 Definitions 11 4 Dimensional data .11 5 References.13 This page intentionally left blank. 11 ANSI/ISA-75.08.01-2002 (R2007) 1 Scope This standard applies to inte
39、gral flanged globe-style control valves, sizes 15 mm (1/2 inch) through 400 mm (16 inches), having top, top and bottom, port, or cage guiding. 2 Purpose The purpose of this standard is to aid users in their piping design by providing Class 125 flat face, and Classes 150, 250, 300, and 600 raised fac
40、e, flanged control valve dimensions, without giving special consideration of the equipment manufacturer to be used. 3 Definitions For definitions of terms used in this standard, see ANSI/ISA-75.05.01-2000 (R2005), Control Valve Terminology. 4 Dimensional data 4.1 Face-to-face dimensions for integral
41、 flanged globe-style control valves. See Table 1. 4.2 For end-to-end dimensions of flanged with ring joint ends, Dimension “A“ shall be adjusted accordingly to ASME B16.10-2000 (R2003), paragraph 3.3. ANSI/ISA-75.08.01-2002 (R2007) - 12 - Table 1 Face-to-face dimensions for integral flanged globe-st
42、yle control valves Nominal valve Size PN 20 (Classes 125 and 150) PN 50 (Classes 250 and 300) PN 110 (Class 600) Tolerance Dimension “A” Dimension “A” Dimension “A” mm Inches mm Inches mm inches mm inches mm inches 15 184 7.25 190 7.50 203 8.00 1.6 0.062 20 184 7.25 194 7.62 206 8.12 1.6 0.062 25 1
43、184 7.25 197 7.75 210 8.25 1.6 0.062 40 1-1/2 222 8.75 235 9.25 251 9.88 1.6 0.062 50 2 254 10.00 267 10.50 286 11.25 1.6 0.062 65 2-1/2 276 10.88 292 11.50 311 12.25 1.6 0.062 80 3 298 11.75 318 12.50 337 13.25 1.6 0.062 100 4 352 13.88 368 14.50 394 15.50 1.6 0.062 150 6 451 17.75 473 18.62 508 20
44、.00 1.6 0.062 200 8 543 21.38 568 22.38 610 24.00 1.6 0.062 250 10 673 26.50 708 27.88 752 29.62 1.6 0.062 300 12 737 29.00 775 30.50 819 32.25 3.2 0.125 350 14 889 35.00 927 36.50 972 38.25 3.2 0.125 400 16 1016 40.00 1057 41.62 1108 43.62 3.2 0.125 ISO 7005-1 designates classes 150 and 300 as PN20
45、 and PN50, respectively. ISO 7005-2 designates classes 125 and 250 as PN20 and PN50, respectively. NOTE 1 Class 125 and PN 20 grey cast iron flanges. Classes 150 and 300 cast copper alloy flanges. NOTE 2 Classes 150, 300, and 600, and PN20, PN50, and PN110 cast steel/alloy steel flanges. Class 600 c
46、ast copper alloy flanges. Class 250 and PN50 grey cast iron flanges. Classes 150 and 300, and PN20 and PN50 cast ductile iron flanges. 13 ANSI/ISA-75.08.01-2002 (R2007) 5 References The following bibliography is included for the definition of pressure classes and flange dimensions, material identifi
47、cation, and cross-reference information. AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME B16.1-1998 Cast Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, and 250 ASME B16.5-2003 Pipe Flanges and Flanged Fittings: NPS 1/2 through 24 ASME B16.10-2000 (R2003) Face-to-Face and End-to-End Di
48、mensions of Valves ASME B16.24-2001 Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500, and 2500 ASME B16.34-2004 Valves Flanged, Threaded and Welding End ASME B16.42-1998 Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300 Available from: ASME T
49、hree Park Avenue New York, NY 10016-5990 Tel: 800-843-2763 http:/www.asme.org INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) IEC 60534-3-1 (2000) Industrial-Process Control Valves - Part 3-1: Dimensions - Face-to-Face Dimensions for Flanged, Two-Way, Globe-Type, Straight Pattern and Centre-to-Face Dimensions for Flanged, Two-Way, Globe-Type, Angle Pattern Control Valves Available from: IEC 3, rue de Varemb P.O. Box 131 CH - 1211 Geneva 20 Switzerland http:/www.iec.ch INTERNATIONAL STANDARDS ORGANIZATION (ISO) ISO 7
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1