ITU-R BT 1301-1-2011 Data services in digital television broadcasting《数字电视广播中的数据业务》.pdf

1、 Recommendation ITU-R BT.1301-1(03/2011)Data services in digital televisionbroadcastingBT SeriesBroadcasting service(television)ii Rec. ITU-R BT.1301-1 Foreword The role of the Radiocommunication Sector is to ensure the rational, equitable, efficient and economical use of the radio-frequency spectru

2、m by all radiocommunication services, including satellite services, and carry out studies without limit of frequency range on the basis of which Recommendations are adopted. The regulatory and policy functions of the Radiocommunication Sector are performed by World and Regional Radiocommunication Co

3、nferences and Radiocommunication Assemblies supported by Study Groups. Policy on Intellectual Property Right (IPR) ITU-R policy on IPR is described in the Common Patent Policy for ITU-T/ITU-R/ISO/IEC referenced in Annex 1 of Resolution ITU-R 1. Forms to be used for the submission of patent statement

4、s and licensing declarations by patent holders are available from http:/www.itu.int/ITU-R/go/patents/en where the Guidelines for Implementation of the Common Patent Policy for ITU-T/ITU-R/ISO/IEC and the ITU-R patent information database can also be found. Series of ITU-R Recommendations (Also avail

5、able online at http:/www.itu.int/publ/R-REC/en) Series Title BO Satellite delivery BR Recording for production, archival and play-out; film for television BS Broadcasting service (sound) BT Broadcasting service (television) F Fixed service M Mobile, radiodetermination, amateur and related satellite

6、services P Radiowave propagation RA Radio astronomy RS Remote sensing systems S Fixed-satellite service SA Space applications and meteorology SF Frequency sharing and coordination between fixed-satellite and fixed service systems SM Spectrum management SNG Satellite news gathering TF Time signals an

7、d frequency standards emissions V Vocabulary and related subjects Note: This ITU-R Recommendation was approved in English under the procedure detailed in Resolution ITU-R 1. Electronic Publication Geneva, 2011 ITU 2011 All rights reserved. No part of this publication may be reproduced, by any means

8、whatsoever, without written permission of ITU. Rec. ITU-R BT.1301-1 1 RECOMMENDATION ITU-R BT.1301-1 Data services in digital television broadcasting (Question ITU-R 45-2/6) (1997-2011) Scope This Recommendation specifies data services to be used for digital television broadcasting. The ITU Radiocom

9、munication Assembly, considering a) that digital television broadcasting has been introduced in many countries around the world; b) that an efficient service identification mechanism is essential due to the flexible and complex nature of the service; c) that conventional television broadcasting syst

10、ems already provide means to convey ancillary data; d) that subtitling is an important service in an increasing number of countries; e) that various multimedia services in other media is expected to stimulate the interest for a broadcast multimedia service; f) that such a service may give broadcaste

11、rs opportunities to provide completely new services as well as promoting existing services; g) that commonality of identification of different data services is desirable, recommends 1 that if digital television broadcasting systems include data services, these services should conform to one or more

12、of the following: ancillary data based on the specifications defined in Annex 1; subtitling based on the specifications defined as specified in Annex 2; broadcast multimedia services based on the specifications defined in Annex 3, 2 that compliance with this Recommendation is voluntary. However, the

13、 Recommendation may contain certain mandatory provisions (e.g. to ensure interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall” or some other obligatory language such as “must” and the negative equivalen

14、ts are used to express requirements. The use of such words shall in no way be construed to imply partial or total compliance with this Recommendation. 2 Rec. ITU-R BT.1301-1 Annex 1 Teletext If a digital television broadcasting service includes an existing teletext system (conforming to Recommendati

15、on ITU-R BT.653) then it should be in accordance with the specification described in this Annex. 1 Introduction This Annex specifies the method by which teletext, in accordance with Recommendation ITU-R BT.653, may be carried in digital video broadcasting bit streams. This transport mechanism is int

16、ended to satisfy the following requirements: to support, if required, the transcoding of the teletext data into the vertical blanking interval (VBI) of analogue video; the transcoded signal should be compatible with existing TV receivers with teletext decoders; the transmission mechanism should be c

17、apable of transmitting subtitles with accurate timing with respect to the video (i.e. to within or near the frame accuracy). A more general data transport mechanism for conveying new types of data services is outside the scope of this Annex, but the transport syntax specified here can also be adapte

18、d for other data. 2 Definitions and abbreviations 2.1 Definitions For the purposes of this Annex, the following definitions apply: MPEG-2 Transport Multiplex: Refers to the International Organization for Standardization/International Electrotechnical Commission Standard 13818 (ISO/IEC Standard 13818

19、). Systems coding is defined in Part 1. Section: A section is a syntactic structure used for mapping all service information defined in Recommendation ITU-R BT.1300 Service multiplex, transport and identification methods for digital terrestrial television broadcasting; into ISO/IEC Standard 13818 tr

20、ansport stream packets. Service: A sequence of programmes under the control of a broadcaster which can be broadcast as part of a schedule. Teletext descriptor: See Recommendation ITU-R BT.1300; it is used in the Programme Specific Information (PSI) Programme Map Table (PMT) to identify streams which

21、 carry teletext. The descriptor is located in a programme map section following the relevant ES_info_length field. 2.2 Abbreviations For the purpose of this Annex, the following abbreviations apply: MPEG: Moving Pictures Expert Group PES: Packetized elementary stream PID: Packet identifier PTS: Pres

22、entation time stamp Rec. ITU-R BT.1301-1 3 3 Insertion of teletext into the MPEG-2 transport multiplex As any video or audio data, teletext data are conveyed in PES packets which are carried by transport stream packets as defined in ISO/IEC Standard 13818-1. The PID of a teletext stream associated w

23、ith a service is identified in the PMT of the PSI for that service. The teletext data stream is given stream_type value 0x06 (which indicates a PES stream carrying private data). The appropriate ES_info field of the programme map section describing teletext data streams shall contain a teletext desc

24、riptor as defined in Recommendation ITU-R BT.1300 for service information in digital video broadcasting. A service may include more than one teletext data stream, provided that each stream has a different value of data_identifier, and that the streams are distinguishable by their respective teletext

25、 descriptors in the PSI. 3.1 data_field for ITU-R teletext systems TABLE 1 Syntax for data_field for ITU-R teletext systems ITU-R teletext system 50 Hz 60 Hz A B C D A B C D Syntax No. of bits Identifier data_field() reserved_future_use 2 2 2 2 2 2 2 Bslbf field_parity 1 1 1 1 1 1 1 Bslbf line_offse

26、t 5 5 5 5 5 5 5 Uimsbf teletext_data_unit 304 344 272 280 280 272 280 Bslbf stuffing_bits 40 72 64 64 72 64 Bslbf 3.1.1 Semantics for PES data field data_identifier: This 8-bit field identifies the type of data carried in the PES packet. It is coded as in Table 2. 4 Rec. ITU-R BT.1301-1 TABLE 2 data

27、_identifier data_identifier Meaning 0x00 to 0x0F A Teletext/50 Hz 0x10 to 0x1F B Teletext/50 Hz 0x20 to 0x2F C Teletext/50 Hz 0x30 to 0x3F D Teletext/50 Hz 0x40 to 0x4F Reserved for future use 0x50 to 0x5F B Teletext/60 Hz 0x60 to 0x6F C Teletext/60 Hz 0x70 to 0x7F D Teletext/60 Hz 0x80 to 0xFF User

28、 defined The data_identifier shall be set to the same value for each PES packet conveying data in the same teletext data stream. data_unit_id: This 8-bit field identifies the type of data unit. It is coded as in Table 3. TABLE 3 data_unit_id data_unit_id Value 0x00 to 0x01 Reserved for future use 0x

29、02 Teletext non-subtitle data 0x03 Teletext subtitle data 0x04 to 0x7F Reserved for future use 0x80 to 0xFE User defined 0xFF data_unit for stuffing For streams identified in the PSI by the digital video broadcasting teletext descriptor (see Recommendation ITU-R BT.1300), only values 0x02, 0x03 and

30、0xFF are permitted. data_unit_length: This 8-bit field indicates the number of bytes in the data unit following the length field. For data units carrying ITU teletext data, this field shall always be set to 0x2C. reserved_future_use: This field may be used in the future for defined extensions. As a

31、default both reserved_future_use bits are set to “1”. field_parity: This 1-bit flag specifies the field for which the data is intended; the value “1” indicates the first field of a frame, the value “0” indicates the second field of a frame. Rec. ITU-R BT.1301-1 5 line_offset: This 5-bit field specif

32、ies the line number on which the teletext data packet is intended to be presented if it is transcoded into the VBI. Within a field, the line_offset numbering shall follow a progressive incremental order except for the undefined line_offset value “0”. The toggling of the field_parity flag indicates a

33、 new field. The line_offset is coded as in Table 4. TABLE 4 line_offset line_offset Meaning Signification 50 Hz 60 Hz field_parity = 1 field_parity = 0 field_parity = 1 field_parity = 0 0x00 Line number undefined Line number undefined0x01 to 0x05 Reserved for future use Reserved for future use 0x06

34、Line number = 6 Line number = 319 0x07 Line number = 7 Line number = 320 0x08 Line number = 8 Line number = 321 0x09 Line number = 9 Line number = 322 0x0A Line number = 10 Line number = 323 Line number = 10 Line number = 273 : : : : : 0x13 Line number = 19 Line number = 332 Line number = 19 Line nu

35、mber = 282 0x14 Line number = 20 Line number = 333 Line number = 20 Line number = 283 0x15 Line number = 21 Line number = 334 Line number = 21 Line number = 284 0x16 Line number = 22 Line number = 335 0x17 to 0x1F Reserved for future use Reserved for future use Only values 0x00 and 0x06 to 0x16 are

36、permitted for teletext data_units in streams identified in the PSI by the digital video broadcasting teletext descriptor (see Recommendation ITU-R BT.1300). teletext_data_unit: These fields correspond to the bytes following the clock-run-in sequence of an ITU teletext system data unit as defined in

37、Recommendation ITU-R BT.653. Teletext data packets are inserted in the same order as they are intended to arrive at the teletext decoder or to be transcoded into the VBI. stuffing_bits: The teletext_data_unit is followed by as many stuffing bits as are required to make the data_field length equal to

38、 352 bits long. 6 Rec. ITU-R BT.1301-1 Appendix 1 to Annex 1 Teletext elementary stream 1301-0181285 3434481285881285 34data_unit_iddata_unit_lengthline_offsetteletext_data_unitstuffing_bytesstuffing_bytesdata_identifierteletext_data_unitstuffing_bytesdata_unit_iddata_unit_lengthline_offsetteletext_

39、data_unitstuffing_bytesdata_unit_iddata_unit_lengthline_offsetfield_parityreserved_future_usefield_parityreserved_future_usefield_parityreserved_future_useLine 1ITU-R teletext system packet46 bytesLine 2ITU-R teletext system packet46 bytesLine 1646 bytesITU-R teletext system packetRec. ITU-R BT.1301

40、-1 7 Annex 2 Subtitling There are a number of schemes for carrying closed caption information in MPEG-2 Transport as defined in Recommendation ITU-T H.262 ISO/IEC 13818-2 or Recommendation ITU-T H.222.0 ISO/IEC 13818-1. Possibilities include: user data in MPEG video as defined in ATSC A/53 Part 4 (2

41、-1); private streams in MPEG systems as defined in ARIB STD-B24 (2-2) and ETSI EN 300 472 (2-3); a registered stream in MPEG systems using the registration descriptor. References (informative) (2-1) ATSC A/53 Part 4 (2007), ATSC Digital Television Standard Part 4 MPEG-2 Video System Characteristics.

42、 (2-2) ARIB STD-B24 V5.3 (2009-07), Data coding and transmission specification for digital broadcasting, Volume 1, Part 3 Coding of caption and superimpose. (2-3) ETSI EN 300 472 V1.3.1 (2003-05), Digital Video Broadcasting (DVB); Specification for conveying ITU-R System B Teletext in DVB bitstreams

43、. Annex 3 Broadcast multimedia services Application environments of broadcast multimedia services should be compliant to Recommendation ITU-T J.200. Content formats used for broadcast multimedia services should be compliant to Recommendations ITU-R BT.1699 and ITU-R BT.1722. Recommendation ITU-T J.2

44、00 defines application environment for digital interactive television services. This Recommendation defines basic architecture of the application environment and architecture of application engines called presentation engine and execution engine. Recommendation ITU-R BT.1699 defines worldwide common

45、 core of content format for presentation engine. Similarly, Recommendation ITU-R BT.1722 defines worldwide common core of content format for execution engine. References (normative) (3-1) Recommendation ITU-T J.200, Worldwide common core Application environment for digital interactive television services. (3-2) Recommendation ITU-R BT.1699 Harmonization of declarative application formats for interactive TV. (3-3) Recommendation ITU-R BT.1722 Harmonization of the instruction set for the execution engine for interactive TV applications.