1、 Recommendation ITU-R F.385-10(03/2012)Radio-frequency channel arrangements for fixed wireless systems operating in the 7 110-7 900 MHz bandF SeriesFixed serviceii Rec. ITU-R F.385-10 Foreword The role of the Radiocommunication Sector is to ensure the rational, equitable, efficient and economical us
2、e of the radio-frequency spectrum by all radiocommunication services, including satellite services, and carry out studies without limit of frequency range on the basis of which Recommendations are adopted. The regulatory and policy functions of the Radiocommunication Sector are performed by World an
3、d Regional Radiocommunication Conferences and Radiocommunication Assemblies supported by Study Groups. Policy on Intellectual Property Right (IPR) ITU-R policy on IPR is described in the Common Patent Policy for ITU-T/ITU-R/ISO/IEC referenced in Annex 1 of Resolution ITU-R 1. Forms to be used for th
4、e submission of patent statements and licensing declarations by patent holders are available from http:/www.itu.int/ITU-R/go/patents/en where the Guidelines for Implementation of the Common Patent Policy for ITU-T/ITU-R/ISO/IEC and the ITU-R patent information database can also be found. Series of I
5、TU-R Recommendations (Also available online at http:/www.itu.int/publ/R-REC/en) Series Title BO Satellite delivery BR Recording for production, archival and play-out; film for television BS Broadcasting service (sound) BT Broadcasting service (television) F Fixed service M Mobile, radiodetermination
6、, amateur and related satellite services P Radiowave propagation RA Radio astronomy RS Remote sensing systems S Fixed-satellite service SA Space applications and meteorology SF Frequency sharing and coordination between fixed-satellite and fixed service systems SM Spectrum management SNG Satellite n
7、ews gathering TF Time signals and frequency standards emissions V Vocabulary and related subjects Note: This ITU-R Recommendation was approved in English under the procedure detailed in Resolution ITU-R 1. Electronic Publication Geneva, 2012 ITU 2012 All rights reserved. No part of this publication
8、may be reproduced, by any means whatsoever, without written permission of ITU. Rec. ITU-R F.385-10 1 RECOMMENDATION ITU-R F.385-10 Radio-frequency channel arrangements for fixed wireless systems operating in the 7 110-7 900 MHz band (Question ITU-R 247/5) (1959-1963-1978-1982-1986-1990-1992-1994-200
9、1-2005-2007-2012) Scope This Recommendation provides RF channel arrangements for fixed wireless systems (FWSs) operating in the 7 GHz band. The main text of as well as Annexes 1 to 5 to this Recommendation present a number of RF arrangements with channel separation of 3.5, 5, 7, 14, and 28 MHz (incl
10、uding the possible use of 2 28 MHz adjacent channels) in the frequency range 7 110-7 900 MHz. The ITU Radiocommunication Assembly, considering a) that FWSs at data rates up to 155 Mbit/s, including synchronous digital hierarchy bit rates, may operate in the 7 GHz band; b) that frequency bands 300 MH
11、z wide may be available for such systems; c) that the availability of frequency bands in the range from 7 110 MHz to 7 990 MHz differs in various countries; d) that economy may be achieved if several go and return channels are connected to one common transmit-receive antenna; e) that many interferin
12、g effects can be minimized by a carefully planned arrangement of the radio frequencies in FWSs employing several RF channels; f) that digital techniques such as cross-polar interference cancellers (XPIC) may significantly contribute to the cross-polar discrimination improvement factor (XIF, defined
13、in Recommendation ITU-R F.746), thus counteracting multipath propagation-induced depolarization; g) that, when very high capacity links (e.g. twice Synchronous Transfer Mode-1(STM-1) are required, further economy may be achieved using system bandwidths wider than the recommended channel separation,
14、associated to high efficient modulation formats, recommends 1 that the preferred RF channel arrangement for several FWSs, operating in the 7 GHz band, should be derived as follows (see Fig. 1 and Note 1): Let 0f be the frequency of the centre of the band of frequencies occupied (MHz); nf be the cent
15、re frequency of one RF channel in the lower half of this band (MHz); nf be the centre frequency of one RF channel in the upper half of this band (MHz), then the frequencies (MHz) of the individual channels with 7 MHz channel separation are expressed by the following relationships (see Fig. 1a): lowe
16、r half of the band: nffn71540+= upper half of the band: nffn770+= 2 Rec. ITU-R F.385-10 where: n = 1, 2, 3, ., 20; the frequencies (MHz) of the individual channels with 14 MHz channel separation are expressed by the following relationships (see Fig. 1b): lower half of the band: nffn145.1570+= upper
17、half of the band: nffn145.30+= where: n = 1, 2, 3, ., 10; the frequencies (MHz) of the individual channels with 28 MHz channel separation are expressed by the following relationships (see Fig. 1c): lower half of the band: nffn285.1640+= upper half of the band: nffn285.30+= where: n = 1, 2, 3, 4 and
18、5; Rec. ITU-R F.385-10 3 2 that, in a section over which the international connection is arranged, all the go channels should be in one half of the band and all the return channels should be in the other half of the band; 3 that for international connections, the centre frequency should preferably b
19、e: f0= 7 575 MHz for the band 7 425 to 7 725 MHz; in addition, other centre frequencies may be used in certain geographical areas by agreement between the administrations concerned, e.g.: f0= 7 275 (for the band 7 125 to 7 425 MHz), 7 400 (for the band 7 250 to 7 550 MHz) or 7 700 MHz (for the band
20、7 550 to 7 850 MHz) (see Note 2); 4 that the actual channel arrangement and antenna polarization should be agreed between the administrations concerned; 5 that Annexes 1 to 5 provide RF channel arrangements which may be considered for use by administrations; 6 that, when very high capacity links are
21、 required and network coordination permits, with the agreement of the administrations concerned, the use of any two adjacent 28 MHz channels specified in recommends 1 is possible, for wider bandwidth system, with centre frequency lying in the central point of the distance between the two 28 MHz adja
22、cent channels; NOTE 1 Care should be taken to the outermost channels that might exceed the band limits. NOTE 2 The RF channel arrangement with f0= 7 700 MHz overlaps some of the channel arrangements mentioned in Recommendation ITU-R F.386. Annex 1 RF channel arrangement in the bands 7 125-7 425 MHz
23、and 7 425-7 725 MHz 1 This Annex describes a RF channel arrangement for low, medium and high capacity digital FWSs, operating in the bands 7 125-7 425 MHz and 7 425-7 725 MHz. The RF channel arrangement is shown in Fig. 2 and is derived as follows: Let f0be the frequency of the centre of the band of
24、 frequencies occupied (MHz); fnbe the centre frequency of one RF channel in the lower half of the band (MHz); nf be the centre frequency of one RF channel in the upper half of the band (MHz), then the frequencies (MHz) of the individual channels, with duplex separation of 154 MHz, are expressed by t
25、he following relationships: a) for channel spacing of 28 MHz (Notes 1 and 2): lower half of the band: fn= f0 161 + 28 n upper half of the band: nf = f0 7 + 28 n where: n = 1, 2, 3, 4 and 5. 4 Rec. ITU-R F.385-10 b) for channel spacing of 14 MHz: lower half of the band: fn= f0 154 + 14n upper half of
26、 the band: fn = f0+ 14n where: n = 1,2, 10; c) for channel spacing of 7 MHz: lower half of the band: fn = f0 150.5 + 7n upper half of the band: fn = f0+ 3.5 + 7n where: n = 1,2, 20; d) for channel spacing of 3.5 MHz: lower half of the band: fn= f0 148.75 + 3.5n upper half of the band: fn = f0+ 5.25
27、+ 3.5n where n = 1,2, 40; e) for channel spacing of 1.75 MHz: lower half of the band: fn= f0 147.875 + 1.75n upper half of the band: fn = f0+ 6.125 + 1.75n where: n = 1,2, 80. FIGURE 2 Occupied spectrum: 7 125-7 425 MHz and 7 425-7 725 MHz (all frequencies in MHz) Guard band go(return) channels Cent
28、re gap return(go) channels Guard band 3 MHz 15 (28 MHz) 14 MHz 15 (28 MHz) 3 MHz 110 (14 MHz) 110 (14 MHz) 1.20 (7 MHz) 120 (7 MHz) 140 (3.5 MHz) 140 (3.5 MHz) 1.80 (1.75 MHz) 180 (1.75 MHz) 7 125 7 128 7 268 7 282 7 422 7 425 7 425 7 428 7 568 7 582 7 722 7 725 Rec. ITU-R F.385-10 5 2 All go channe
29、ls of the same link should be in one half of the band and all return channels should be in the other half of the band. 3 For adjacent RF channels in the same half of the band, different polarizations may be used for alternate channels or where it is possible, both polarizations may be utilized for e
30、ach digital radio-frequency channel. 4 The preferred centre frequency f0is: 7 275 MHz for the band 7 125-7 425 MHz; 7 575 MHz for the band 7 425-7 725 MHz. NOTE 1 56 MHz channels may be provided according to recommends 6 of the present Recommendation. Their centre frequencies may be calculated as fo
31、llows: lower half of the band: fn= (f0 147 + 28n), MHz upper half of the band: fn = (f0+ 7 + 28n), MHz where: n = 1, 2,4. Their numbering is just for identification of the channelling. It should be noted, that adjacent channel numbers cannot be used on the same physical link due to channel overlap.
32、NOTE 2 When additional digital radio frequencies interleaved 28 MHz channels between those of the main pattern of Fig. 2 are required, they can be realized using the same f0and the equation reported in Note 1. Annex 2 RF channel arrangement in the band 7 435-7 750 MHz with channel spacings of 5, 10
33、or 20 MHz 1 This Annex describes a RF channel arrangement suitable for digital FWSs up to 19 Mbit/s (1.544 12) and allows coexistence of digital systems and medium capacity analogue systems spaced on a 20 MHz interval operating in the band 7 435-7 750 MHz. The RF channel arrangement is shown in Fig.
34、 3 and is derived as follows: Let f0be the frequency of the centre of the band of frequencies occupied (MHz); fnbe the centre frequency of one RF channel in the lower half of the band (MHz); nf be the centre frequency of one RF channel in the upper half of the band (MHz), then the frequencies (MHz)
35、of the individual channels are expressed by the following relationships: lower half of the band: fn= f0 152.5 + 5 n upper half of the band: nf = f0+ 7.5 + 5 n where: n = 1, 2, 3, 4, 5, 6, ., 28. 6 Rec. ITU-R F.385-10 2 All go channels should be in one half of the band and all return channels should
36、be in the other half of the band. 3 The centre frequency f0is 7 592.5 MHz. 4 For all RF channels in the same half of the band, the same polarization may be used or, where it is necessary because of the existence of interference, different polarizations may be utilized. Where it is possible, both pol
37、arizations may be utilized for each digital RF channel. 5 Digital RF channels for 12.6 Mbit/s (1.544 8) or 19 Mbit/s (1.544 12) systems, can be realized by use of a 10 or 20 MHz interval. Annex 3 RF channel arrangement in the band 7 110-7 750 MHz with a channel spacing of 28 MHz This Annex describes
38、 a RF channel arrangement for the 7 GHz band. The arrangement provides for up to ten go and ten return channels, each accommodating about 140 Mbit/s or the synchronous digital hierarchy bit rates subdivided in two groups of five go and five return channels relating to the lower part and the higher p
39、art of the band. The RF channel arrangement is as shown in Fig. 4 and is derived as follows: Let f0lbe the frequency at the centre of the lower part of the band: f0l= 7 275 MHz, f0hbe the frequency at the centre of the higher part of the band: f0h= 7 597 MHz, fnlbe the centre frequency of one RF cha
40、nnel in the lower half of the lower part of the band, Rec. ITU-R F.385-10 7 nlf be the centre frequency of one RF channel in the upper half of the lower part of the band, fnhbe the centre frequency of one RF channel in the lower half of the higher part of the band, nhf be the centre frequency of one
41、 RF channel in the upper half of the higher part of the band, then the frequencies (MHz) of the individual channels are expressed by the following relationships: fnl= f0l 182 + 28 n nlf = f0l+ 14 + 28 n fnh= f0h 168 + 28 n nhf = f0h+ 28 n where: n = 1, 2, 3, 4, 5. When the equipment and network char
42、acteristics permit, the co-channel frequency reuse arrangement can be employed, with the agreement of the administration concerned, for improving spectral efficiency. Annex 4 RF channel arrangement in the band 7 425-7 900 MHz with a channel spacing up to 28 MHz11 This Annex describes a RF channel ar
43、rangement suitable for digital FWSs with a channel spacing up to 28 MHz, and makes provision for eight 28 MHz channels. 1The frequency range in this Annex partly overlaps with the band 7 725-8 500 MHz mentioned in Recommendation ITU-R F.386. 8 Rec. ITU-R F.385-10 The radio-frequency channel arrangem
44、ent is shown in Fig. 5 and is derived as follows: Let f0be the frequency of the centre of the band of frequencies occupied (MHz); fnbe the centre frequency of one RF channel in the lower half of the band (MHz); nf be the centre frequency of one RF channel in the upper half of the band (MHz), then th
45、e frequencies (MHz) of individual 28 MHz channels are expressed by the following relationships: fn= f0 248.5 + 28 n nf = f0 3.5 + 28 n where: n = 1 to 8. 2 The eight channels with a spacing of 28 MHz can be subdivided to provide 16 channels with a spacing of 14 MHz or 32 channels with a spacing of 7
46、 MHz. The 28 MHz and 14 MHz channels are centred on the 7 MHz pattern of recommends 1 and 4, whilst the 7 MHz channels are interleaved with an offset of 3.5 MHz. The frequencies (MHz) of individual channels are expressed by the following relationships: for 14 MHz channels: fn= f0 241.5 + 14 n nf = f
47、0+ 3.5 + 14 n where: n = 1 to 16 for 7 MHz channels: fn= f0 238 + 7 n nf = f0+ 7 + 7 n Rec. ITU-R F.385-10 9 where: n = 1 to 32. 3 All go channels should be in one half of the band and all return channels should be in the other half of the band. 4 The centre frequency f0is 7 662.5 MHz. NOTE 1 The fi
48、rst five channels with a spacing of 28 MHz in the lower sub-band of the above channel arrangement align with those in Annex 1, covering the 7 425-7 725 MHz band. The go-return spacing is greater as a result of using the full 7 425-7 900 MHz band. Annex 5 RF channel arrangement for FWSs operating in
49、the 7 250-7 550 MHz band with channel spacings of 28, 14, 7 and 3.5 MHz This Annex describes a RF channel arrangement suitable for digital FWSs with channel spacings of 28, 14, 7 and 3.5 MHz. The RF channel arrangement is shown in Fig. 6 and is derived as follows: Let f0be the frequency of the centre of the band of frequencies occupied (MHz); fnbe the centre frequency of one RF channel in the lower half of the band (MHz); nf be the centre frequency of one RF channel in the upper half
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1