ITU-R SM 1139-1995 International Monitoring System《国际监测系统》.pdf

1、58 ITU-R RECMN*SM- SERIES 95 4855232 052b783 83b Rec. ITU-R SM.1139 RECOMMENDATION ITU-R SM. 1 139* INTERNATIONAL MONITORING SYSTEM (1995) The ITU Radiocommunication Assembly, considering a) the Final Report and recommendations of the Voluntary Group of Experts (VGE) to study allocation and improved

2、 use of the radio-frequency spectrum and simplification of the Radio Regulations (RR) which was established in accordance with Resolution No. 8 of the Plenipotentiary Conference (Nice, 1989) and continued its work in accordance with Resolution No. 8 of the Additional Plenipotentiary Conference (Gene

3、va, 1992); b) proposals for the Simplified RR; cl the necessity to assist to the extent practicable in the implementation of the RR, in particular to help ensure efficient and economical use of the radio-frequency spectrum and to help in the prompt elimination of harmful interference; d) that the re

4、levant provision of the Simplified RR states that administrative and procedural requirements for use and operation of the intemational monitoring system shall be in accordance with the provisions of this Recommendation, that the 1995 World Radiocommunication Conference (WRC-95) will consider and ado

5、pt, as appropriate recommends 1 that in requesting monitoring observations, administrations and the Radiocommunication Bureau should take into account the monitoring facilities set forth in the List of International Monitoring Stations, and should clearly specify both the purpose for which the obser

6、vations are requested and the parameters of the requested monitoring work (including appropriate schedules). The results of such monitoring forwarded to other administrations may also be sent to the Radiocommunication Bureau, if appropriate; 2 that monitoring requests from international organization

7、s not participating in the international monitoring system should be coordinated by the Radiocommunication Bureau and, if appropriate, forwarded by it to administrations; 3 that the technical standards recommended by the Radiocommunication Assembly to be observed by monitoring stations shall be reco

8、gnized by the Radiocommunication Bureau as the optimum practicable technical standards for monitoring stations participating in the international monitoring system; 4 that, to meet some needs for monitoring data, stations observing lower technical standards may participate in the international monit

9、oring system at the discretion of their administrations; 5 that administrations having determined whether the monitoring stations meet adequate technical standards, shall notify to the Radiocommunication Bureau pertinent information on the centralizing office and on the stations they wish to have in

10、cluded in List VIII, clearly identifying those stations which may participate in the international monitoring system; 6 that results of measurements (see Note 1) forwarded to the Radiocommunication Bureau or other administrations shall indicate the estimated accuracy obtained at the time the measure

11、ments were made. NOTE 1 - Where the results supplied by any monitoring station appear to be doubtful or insufficient for its purposes, the Radiocommunication Bureau shall advise the administration or international organization concerned giving the appropriate details; 7 that administrations shall ma

12、ke every effort to arrange for monitoring observations (see Annex 1) to be submitted to the Radiocommunication Bureau as soon as possible. * Reference has been made to this Recommendation in the Radio Regulations as revised by the World Radiocommunication Conference 1995 (WRC-95). This will come int

13、o force on 1 June 1998. ITU-R RECMN*SM- SERIES 95 4855232 0526784 772 Rec. ITU-R SM.1139 ANNEX 1 Reports of international monitoring of emissions Section I. Reports Concerning Stations in the Terrestrial Radiocommunication Services 59 Reports of measurements of frequency should contain as much as ne

14、cessary of the following information: indentification of the monitoring station (administration or organization, and location); date of measurement; time of measurement (UTC); call sign or other means of identification, or both, of the station monitored; class of emission (see Note 1); assigned freq

15、uency or reference frequency; frequency tolerance; measured frequency; accuracy of measurement; departure from assigned or reference frequency; additional information (e.g. period convered by measurement, drift of measured frequency during that period, quality of received signal and conditions of re

16、ception); remarks. Reports of measurements of field strength or power flux-density should contain as much as necessary of the following information: identification of the monitoring station (administration or organization, and location); date of measurement; time of measurement (UTC); call sign or o

17、ther means of identification, or both, of the station monitored; class of emission (see Note 1); assigned frequency; value of measured field strength or power flux-density; estimated accuracy of measurement; value of the measured component of polarization; other elements or characteristics of the me

18、asurement; remarks. Reports of observations of spectrum occupancy should as far as practicable be made in the form recommended by the BR and contain if possible the following information: a) b) date of measurement; c) time of measurement (UTC); d) e) identification of the monitoring station (adminis

19、tration or organization, and location) call sign or other means of identification, or both, of the station monitored; class of emission (see Note 1); 60 ITU-R RECMNwSM- SERIES 75 m 4855232 0526785 b09 m Rec. ITU-R SM.1139 f) g) measured frequency; h) i) j) k) i) remarks. 4 should be used as far as p

20、ossible. class of station and nature of service; period during which the emission was heard or recorded; value of measured field strength or power flux-density or signal strength according to the QSA scale; occupied bandwidth (indicate whether measured or estimated, or indicate the necessary bandwid

21、th notified to the BR); information as to the locality or area in which reception is intended; In providing these data, the symbols contained in the RR or in the Preface to the International Frequency List Section II. Reports Concerning Stations in the Space Radiocommunication Services Reports of me

22、asurements of frequency should contain as much as necessary of the following information: identification of the monitoring station (administration or organization, and location); date of measurement; time of measurement (UTC); call sign or other means of identification, or both, of the station monit

23、ored; class of emission (see Note i); assigned frequency or reference frequency: frequency tolerance; measured frequency; accuracy of measurement; departure from assigned or reference frequency; additional information (e.g. period covered by measurement, drift of measured frequency during that perio

24、d, quality of received signal and conditions of reception); remarks. Reports of measurements of field strength or power flux-density should contain as much as necessaq of the following information: identification of the monitoring station (administration or organization, and location); date of measu

25、rement; time of measurement (UTC): call sign or other means of identification, or both, of the station monitored; class of emission (see Note i); assigned frequency; value of measured field strength or power flux-density; estimated accuracy of measurement: value of the measured component of polariza

26、tion; other elements or characteristics of the measurement; remarks. ITU-R RECMN*SM- SERIES 9.5 m 4855232 0526386 545 Rec. ITU-R SM.1139 61 3 by the BR and contain if possible the following information: Reports of observations of spectrum occupancy should as far as practicable be made in the form re

27、commended Reports of observations concerning emissions of space stations: identification of the monitoring station (administration or organization, and location; date of measurement; time of measurement (UTC); call sign or other means of identification, or both, of the station monitored; class of em

28、ission (see Note 1); class of station and nature of service; measured frequency; period during which the emission was heard or recorded; value of measured field strength or power flux-density or signal strength according to the QSA scale; occupied bandwidth (indicate whether measured or estimated, o

29、r indicate the necessary bandwidth notified to the BR); observed polarization; information on orbit; information as to the locality or area in which reception is intended, if known; remarks. Reports of observations concerning emissions of earth stations: identification of the monitoring station (adm

30、inistration or organization, and location); date of measurement; time of measurement (UTC); call sign or other means of identification, or both, of the station monitored; class of emission (see Note 1); class of station and nature of service; measured frequency; period during which the emission was

31、observed or recorded; value of measured field strength or power flux-density or signal strength according to the QSA scale; occupied bandwidth (indicate whether measured or estimated, or indicate the necessary bandwidth notified to the BR); information as to the orbital position where reception is i

32、ntended; remarks. In providing these data, the symbols contained in the RR or in the Preface to the International Frequency List should be used as far as possible. NOTE 1 - The class of emission shall contain the basic characteristics listed in Article 4 and, if possible, the additional characteristics listed in Appendix 6. If any characteristic cannot be determined, indicate the unknown symbol with a dash. However, if a station is not able to identify unambiguously whether the modulation is frequency or phase modulation, indicate frequency modulation (F).