ITU-R TF 1011-1-1997 Systems Techniques and Services for Time and Frequency Transfer《时间和频率传送的系统 技术和业务》.pdf

1、 - - STD-ITU-R RECMN TF.LO22-L-ENGL 2997 4855222 0532539 209 = Rec. ITU-R TF.1011-1 31 RECOMMENDATION ITU-R TF.1011-1 SYSTEMS, TECHNIQUES AND SERVICES FOR TIME AND FREQUENCY TRANSFER (Question IT-R 102/7) (1994-1997) The Radiocommunication Assembly, considering 4 the continuing need in all parts of

2、the world for readily available standard frequency and time reference signals; b) that different levels of precision and accuracy, ranging from 1 s down to about 1 ns, are required for the large number of diverse applications for time and frequency; c) that, in many time and frequency applications,

3、the selection of an optimum time and frequency transfer system or technique must also take into account other factors, such as availability, reliability, capabilities for automatic operation, convenience of use and cost; d) that, throughout the world, many different systems, techniques and services

4、have been used successfully to satisfy a large variety of time and frequency requirements; e) that useful systems, techniques and services include both those dedicated for time and frequency needs and others that are designed primarily for other functions, such as navigation or communications, recom

5、mends 1 that, when selecting a suitable source of time and frequency reference signals or an optimum technique for time and frequency transfer, each application first be carefully analysed with respect to the relative importance of accuracy and/or precision, geographical coverage, availability (for

6、example, the fraction of time that the signal is available at the stated performance levei), ease of use and user costs; 2 that, based on such an analysis of specific requirements and their relative importance, suitable systems, techniques or services could be selected from those listed in Annex 1 *

7、 dong with their most important characteristics. * Additional information is also available in the ITU-R Handbook on selection and use of precise frequency and time systems. STD.1TU-R RECMN TF-LOLL-1-ENGL 1997 4855232 0533540 T20 32 Rec. ITU-R TF.1011-1 8 8 O VI O Y O m 8 VI O 8 O d VI O O v, Li e m

8、 - I 2 o O .- b 2 b O Y 7 2 N, b c z E 8 8 Li ul c O O VI O O in - ul S N 3. VI 2 O O - STD-ITU-R RECMN TF-LO11-1-ENGL 1997 m 4855212 0531541 967 m 1 Rec. ITU-R TF.lO1l-1 8 O rn P- O Y O v, 2 E 9; z u o a O v) Y 3 2 Y m o B v1 5 O c u .- Y C v) =I O .- 2 u Y c e m u 3 2 d O Y b, b E: b X vl Y) C O 0

9、 a O v) O Y 0 2 d O u e Y) C 0 O 2. F: o m u m X m o I .- u 2 D r;: m u .- Y o“ STD-ITU-R RECMN TF-LOII-II-ENGL 1997 - 4855232 0533542 8T3 = 34 Rec. ITU-R TF.1011-1 Special notes concerning the various dissemination/comparison methods Attention should be paid to the fact that in order to achieve the

10、 stated accuracies, calibration of the user equipment is often necessary. HF broadcasts Many of the HF broadcast services make use of the internationally allocated frequencies for this purpose at 2.5, 5, 10, 15, 20 and 25 MHz. Other HF services use frequencies in other bands in order to reduce mutua

11、l interference. Such services provide modest accuracy performance but offer advantages in terms of wide geographical coverage, convenience of use (for 1 s accuracy level) and inexpensive user equipment. Recommendation ITU-R TF.768 contains detailed information on formats, broadcast schedules and oth

12、er characteristics of most HF time and frequency services. LF broadcasts Broadcasts of this type, useful for time and frequency applications include: - various dedicated time and frequency services operating in the 40-80 kHz band; and - radionavigation system broadcasts, such as Loran-C stations at

13、100 kHz, which provide highly stabilized and synchronized transmissions. The dedicated time and frequency services often include phase and/or amplitude modulations that provide complete time and date information in coded form. A large number of Loran-C stations exist, principally in the northern hem

14、isphere. Main advantages include good accuracy for both time and frequency, availability of relatively inexpensive receivers and convenience of use. One disadvantage is the undetected occurrence of cycle slips, which degrade the accuracy. Recommendation ITU-R TF.768 contains detailed information on

15、formats, broadcast schedules and other characteristics of many LF transmissions. VLF broadcasts VLF broadcasts in the 10-30 kHz range are useful primarily for frequency applications. Stable propagation characteristics and long-distance coverage make such signals useful for frequency comparisons at t

16、he 1 x lo-” level or better. VLF broadcasts do not normally contain complete time-of-day information. Recommendation ITU-R TF.768 contains detailed information on formats, broadcast schedules and other characteristics of some useful VLF transmissions. Television broadcasts A number of methods for us

17、ing television broadcasts for time and frequency dissemination and comparisons have been tried and some are in current use. These include the insertion of coded time and frequency information into the television signal, the stabilization of television carrier frequencies and synchronization pulses a

18、nd the common-view reception of a single television transmission in a local area. The most commonly used method today involves the common-view method allowing timing systems to be compared within a local station coverage area to within about 10 ns. Navigation satellite (broadcast) This technique emp

19、loys the direct reception of timing information from navigation satellite systems such as the Global Positioning System (GPS) and the GLONASS system. Information is included in the satellite signals which allows the user to compensate approximately for the propagation delays and apply corrections fo

20、r differences between the local satellite clock and UTC. Accuracies of better than 500 ns for time and 1 x for frequency comparisons are possible, even in the presence of intentional degradation of the signals, known as selective availability. Principal advantages include: widespread availability of

21、 commercial receivers; global coverage from multiple satellite (2 1-24 per system); automatic operation; high accuracy and use of onboard atomic standards. STD=ITU-R RECMN TF.LO33-L-ENGL 1997 W 4855232 0531543 73T Rec. ITU-R TF.lO1l-1 35 Navigation satellite (common-view) With this technique the sam

22、e GPS or GLONASS satellite is observed from two different timing sites at precisely the same time. Subtracting the results from the two sites eliminates effects of the satellite clock and at least partially compensates for ephemeris errors. Intentional degradation of the satellite signals may or may

23、 not degrade the common- view time comparisons, depending on how it is implemented. Time comparison uncertainties of better than 20 ns for widely separated sites are routinely possible. This approach offers higher accuracy than the direct method but requires special coordination arrangements among t

24、he sites being compared. Bureau intemational des poids et mesures (BIPM) publishes schedules to enable the required coordination. To achieve the iti5 uncertainty, integration times up to 50 days are required. Meteorological satellite Two geostationary satellites of the geostationary operational envi

25、ronmental satellite (GOES) system have been used since 1974 to disseminate a UTC time code to the region of North and South America and the surrounding ocean areas. Complete time and date information is transmitted continuously along with satellite position information for automatic path delay compe

26、nsation by the user?s receiver. Uncertainties of less than 100 ps can normally be achieved. Geographical coverage from the GOES satellites may be somewhat limited beyond North and South America until the satellite constellation is replenished with newer satellites, scheduled for the 1994- 1995 perio

27、d. Other geostationary broadcast satellites Other satellite systems have also been used for transmitting time signals in a one-way mode. Currently, the multi- function INSAT satellites transmit a complete time code to a coverage area within and around the Indian subcontinent. Satellite position info

28、rmation is also included in the format, allowing users with automatic receivers to compensate for path delay within an accuracy of about 20 ps. Communications satellites (two-way mode) At present, the two-way exchange of timing signals through communication Satellites offers the most accurate techni

29、que for comparing remote timing sites. Much experience has been gained throughout the world with this technique and an increasing number of timing centres are using, or preparing to use, this technique for operational international time transfers to an accuracy level that approaches 1 ns. Advantages

30、 include the high accuracy capability and the availability of many suitable communication satellites in all regions of the world. Disadvantages include the need for users to both transmit and receive timing signals and the relatively high equipment costs. At the highest accuracy levels the careful c

31、alibration of ground-station equipment delays is a difficult, but necessary, requirement. Specialized time-transfer modems, optimized for high accuracy and stability, are being developed for timing applications. Ten days of integration are required to reach the accuracy. Telephone time code Several

32、timing centres in North America and Europe have established services designed to disseminate coded time information over telephone lines in an automated mode. Typically, computers and other automated systems are programmed to dial such services as needed, receive an ASCII time code, reset the local

33、clock and automatically correct for the path delay involved through the telephone system. The path delay compensation can be performed either by the timing centre?s equipment or at the user?s site. Accuracies in the range of 1-10 ms are possible in many cases. Advantages include simplicity, very low

34、 user cost and suitability for automated systems. The principal disadvantage is the limited accuracy. STD-ITU-R RECMN TFJOIIII-IIENGL I1997 W 4855232 0533544 676 36 Rec. ITU-R TF.1011-1 Optical fibre (local) Two types of fibres (multimode and single mode) are in use today. Multimode is generally use

35、d to transmit digital data and low frequencies over a relatively short distance (e.g. 1 km). Single mode is best for a longer distance (e.g. 50 km) and is wideband (e.g. 5 MHz to 100 GHz). Single mode fibre with a 1300 nm laser is required to meet the performance stated in the table. The nominal coe

36、fficient of delay with respect to temperature is 7 x 10-6/OC. In order to meet the stated performance, the cable must be temperature stabilized, i.e. put underground 1.5 m for any reasonable length (e.g. 50 m or more). Insertion loss is approximately 0.5 dBh. Optical fibre (remote) The accuracies st

37、ated in Table 1 have been achieved in optical fibres over a distance of 2400 km in a digital telecommunication system. Carefully minimizing cable length asymmetry in the round-trip transmission path can achieve sub-microsecond time accuracy and time stability of about 1 ns. The terminal delay of a p

38、articular system adhering to Recommendations ITU-T G.707, ITU-T G.708 and ITU-T G.709 was controlled to within 5 ns. Microwave link Microwave links are generally limited to line-of-sight unless repeaters or billboard reflectors are utilized. Generally, a dedicated channel rather than time-share mult

39、iplexing is required for short-term, continuous operation. To meet the stated requirements in Table 1, two-way operation to null-out phase fluctuations is required. This means a feedback system and a continuously operating channel. Microwave links are sensitive to atmospheric conditions (rain, snow,

40、 antenna vibration, etc.) and multipath effects. Coaxial cable To meet the stated performance, factors such as temperature stability, length and type of coaxial cable must be considered. Insertion loss is dependent on cable length, type and frequency involved. Solid dielectric cables have a coeffici

41、ent of delay of 250 x lo4 (or even greater at 25“ C); air dielectric is 15 x but must be dry-nitrogen pressurized with a dual-stage pressure regulator in a temperature-controlled environment. Cable temperature must be stabilized by installing the cable 1.5 m underground or in an environment with less than 1“ C variation. Coaxial cables should be considered only for reasonably short lengths of less than several hundred metres.