ITU-T G 967 3-2000 V-Interfaces at the Service Node (SN) Protocol Implementation Conformance Statements for Interfaces at VB5 Reference Points - Series G Transmission Systems and Mns.pdf

1、 - - STD-ITU-T RECMN G.967-3-ENGL 2000 I 4Bb2593 Ob88438 734 111 INTERNATIONAL TELECOMMUNICATION UNION ITU=T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU G.967.3 (03/2000) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital transmission systems - Digital sections and di

2、gital line system - Digital section and digital transmission systems for customer access to ISDN V-interfaces at the service node (SN): Protocol implementation conformance statements for interfaces at VB5 reference points ITU-T Recommendation G.967.3 (Formerly CCITT Recommendation) STDgITU-T RECMN G

3、.767-3-ENGL 2000 4862573 0688439 670 = 1“-T G-SERIES RECOMMENDATIONS TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS GENERAL CHARACTERISTICS COMMON TO ALL ANALOGUE CARRIER- TRANSMISSION SYSTEMS INDIVIDUAL CHARACTERISTICS OF INTERNATIONAL CARRTER TELEPHONE SYSTEMS ON METALLIC LINES COORD

4、INATION OF RADIOTELEPHONY AND LINE TELEPHONY TERMINAL EQUIPMENTS DIGITAL NETWORKS DIGITAL SECTIONS AND DIGITAL LINE SYSTEM General Parameters for optical fibre cable systems Digital sections at hierarchcal bit rates based on a bit rate of 2048 kbitk Digital line transmission systems on cable at non-

5、hierarchical bit rates Digital line systems provided by FDM transmission bearers Digital line svstems G.200-G.299 G.300-G.399 G.450-G.499 G.700-G.799 G.800-G.899 G.900-G.999 G.900-G.909 G.910-G.919 G.920-G.929 G.930-G.939 G.940-G.949 G.950-G.959 Optical fibre submarine cable systems G.970-G.979 Opti

6、cal line systems for local and access networks Access networks G.980-G.989 G.990-G.999 For further details, please refer to the list of ITU-TRecommendations. STD.1TU-T RECMN G.967.3-ENGL 2 4862593 0688420 372 ITU-T Recommendation G.967.3 V-interfaces at the service node (SN) - Protocol implementatio

7、n conformance statements for interfaces at VB5 reference points Summary This ITU-T Recommendation defines the Protocol Implementation Conformance Statements (PICS) for protocols across the VB5 reference point as a supporting tool to ensure the interoperability of Access Networks and Service Nodes co

8、nnected via interfaces at the VB5 reference points. It covers both the Real-Time Management Coordination (RTMC) protocol which applies to the VB5.1 and the VB5.2 reference point and the Broadband Bearer Connection Control (B-BCC) protocol which exclusively applies to the VB5.2 reference point. To ev

9、aluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called a Protocol Implementation Conformance Statement (PICS). Source ITU-T Recommendation G.967.3

10、 was prepared by ITU-T Study Group 13 (1997-2000) and approved under the WTSC Resolution 1 procedure on 1 O March 2000. Keywords Access Network, PICS, Service Node,VBS reference points. STD*ITU-T RECMN G.767.3-ENGL 2000 U 48b2571 0688421 229 FOREWORD The International Telecommunication Union (ITU) i

11、s the United Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizi

12、ng telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of IT-T Recommendations is covered

13、 by the procedure laid down in WTSC Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with IS0 and EC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate

14、both a telecommunication administration and a recognized operating agency. INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the

15、 evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, wh

16、ich may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database. o ITU 2001 All rights reserved. No part of this publication may be reproduced or utilized

17、in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in w-riting from the ITU. STD-ITU-T RECMN G.9b7-3-ENGL 2000 - 4862591 0688422 165 CONTENTS Page Scope 1 2 References 3 Definitions and abbreviations . 3.1 Definitions 3.2 Abbreviations . 4

18、 PICS for interfaces at the VB5.1 reference point . 5 PICS for interfaces at the VB5.2 reference point . 6 6.1 6.2 Differences fi-om the ETSI PICS documents Differences Fom EN 301 005-2 3 . Differences Fom EN 301 217-2 5 . 1 1 2 3 STD-ITU-T RECMN G-967-3-ENGL 2000 = 48b259L 0688423 OTL ITU-T Recomme

19、ndation G.967.3 V-interfaces at the service node (SN) - Protocol implementation conformance statements for interfaces at VB5 reference points 1 Scope This ITU-T Recommendation defines the Protocol Implementation Conformance Statements (PICS) for protocols across the VB5 reference point as a supporti

20、ng tool to ensure the interoperability of Access Network and Service Nodes connected via interface(s) at the VB5 reference point. It covers both the Real-Time Management Coordination (RTMC) protocol which applies to the VB5.1 and the VB5.2 reference point and the Broadband Bearer Connection Control

21、(B-BCC) protocol which exclusively applies to the VB5.2 reference point. To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called a Protocol Im

22、plementation Conformance Statement (PICS). 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations

23、and other references are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly publis

24、hed. ITU-T Recommendation G.967.1 (1998), Y-interfaces at the sewice node (SN) - VB5.I reference point specijcation. ITU-T Recommendation G.967.2 (1999), V-interfaces at the sewice node (SN) - VB5.2 reference point spec$cation. ETSI EN 301 005-2 (1998), Y-interfaces at the digital Sewice Node (SN);

25、Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANS); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specijcation . ETSI EN 301 005-1 (1998), V interfaces at the digital Service Node (SN); Interfaces at

26、 the VB5.I reference point for the support of broadband or combined narrowband and broadband Access Networks (ANS); Part I: Interface specijcation. ETSI EN 301 217-2 (1999), V interfaces at the digital Sewice Node (SN); Interfaces at the VB5.2 reference point for the support of broadband or combined

27、 narrowband and broadband Access Networks (ANS); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specijcation. ETSI EN 301 217-1(1999), V inte$aces at the digital Sewice Node (SN); Interfaces at the VB5.2 reference point for the support of broadband or combined narrowband and b

28、roadband Access Networks (ANS); Part 1 : Interface specijcation. ISOIIEC 9646- 1 : 1994 Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part I: General concepts. STD-ITU-T RECflN G.qb7.3-ENGL ZOOU 4b259L Ob88424 T3 3 Definitions and abbreviatio

29、ns 3.1 Definitions For the purposes of this ITU-T Recommendation, the following terms defined in ISOAEC 9646-1 3.1.1 Implementation Conformance Statement (ICs): A statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities hav

30、e been implemented. 3.1.2 Protocol Implementation Conformance Statement (PICS): An ICs for an implementation or system claimed to conform to a given protocol specification. 3.1.3 ICs pro forma: Document, in the form of a questionnaire, which when completed for an implementation or system becomes an

31、ICs. 3.1.4 static conformance review: Review of the extent to which the static conformance requirements are met by the Implementation Under Test (IUT), accomplished by comparing the PICS with the static conformance requirements expressed in the relevant standard(s) (see 71 apply: ISO/IEC9646-1 7 ).

32、3.2 Abbreviations This Recommendation uses the following abbreviations: AN B-BCC ETSI ICs IUT PICS RTMC SAAL SN VCL VPCI VPL Access Network Broadband Bearer Connection Control European Telecommunication Standards Institute Implementation Conformance Statement Implementation Under Test Protocol Imple

33、mentation Conformance Statement Real Time Management Coordination Signalling ATM Adaptation Layer Service Node Virtual Channel Link Virtual Path Connection Identifier Virtual Path Link 4 ITU-T Recommendation G.967.1 i specifies the physical, procedural and protocol requirements for interfaces at the

34、 VB5.1 reference point between an Access Network (AN) and a Service Node (SN) with flexible (provisioned) Virtual Path Link (VPL) allocation and flexible (provisioned) Virtual Channel Link (VCL) allocation (controlled by the 43 interfaces) at the VB5.1 reference point. The detailed PICS which confor

35、ms to the VB5.1 reference point shall be as shown in ETSI EN 301 005-2 - “VB5.1 Protocol Implementation Conformance Statement (PICS) proforma specification“ 3. PICS for interfaces at the VB5.1 reference point STD-ITU-T RECMN G-967.3-ENGL ZU00 486259L Ob88425 974 NOTE - In the ETSI EN 301 005-2 3, re

36、ference is made to EN 301 005-1 4 for the detailed VB5.1 specification and subclauses. All such references should be understood to refer also to the corresponding subclauses of ITU-T Recommendation G.967.1 i. (Subclause numbering is the same in both documents.) 5 ITU-T Recommendation G.967.2 2 speci

37、fies the physical, procedural and protocol requirements for interfaces at the VB5.2 reference point between an Access Network (AN) and a Service Node (SN). The VB5.2 reference point provides flexible (provisioned) Virtual Path Link (VPL) allocation and flexible (provisioned) Virtual Channel Link (VC

38、L) allocation (controlled by the 43 interfaces) as well as on-demand VCL allocation controlled by the SN via the broadband bearer connection control (3-BCC) protocol. The VB5.2 reference point is a superset of the VB5.1 reference point, enabling on-demand VCL allocation in the AN and across the VB5

39、reference point via the additional B-BCC function. That is the PICS for interfaces at the VB5.2 reference point comprise the PICS defined for the VB5.1 reference point and those which are specific for the B-BCC protocol. The detailed PICS which conforms to the VB5.2 reference point shall be as shown

40、 in ETSI EN 301 217-2 - “VB5.2 Protocol Implementation Conformance Statement (PICS) proforma specification“ 51. NOTE - In ETSI EN 301 217-2 5, reference is made to EN 301 005-1 4 for the detailed vB5.1 specification and subclauses, and to EN 301 217-1 6 for the detailed VB5.2 specification and subcl

41、auses. All such references should be understood to refer also to the corresponding subclauses of ITU-T Recommendations G.967.1 i and (3.967.2 2 respectively. (In both cases, subclause numbering is the same in the corresponding lTU-T and ETSI documents.) PICS for interfaces at the VB5.2 reference poi

42、nt Differences from the ETSI PICS documents Differences from EN 301 005-2 3) “13.6.1.5.2“ in the column “Reference“ for item 9 of Table A.ll should be replaced by “13.3.1 S.2“. “13.6.1.5.2“ in the column “Reference“ for item 9 of Table A.29 should be replaced by “13.3.1 S.2“. Differences from EN 301

43、 217-2 5 “13.6.1.5.2“ in the column “Reference“ for item 9 of Table A.12 should be replaced by II 1 3 -3.1 .5.2“. “13.6.1.5.2“ in the column “Reference“ for item 9 of Table A.49 should be replaced by I 1 3.3.1 -5.2“. “AM FAULT ACC“ in the column “message“ for item 9 of Table AS5 should be replaced by “N-FAET-ACC“.