1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T G.997.2 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU Corrigendum 2 (12/2016) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system Metallic access networks Physic
2、al layer management for G.fast transceivers Corrigendum 2 Recommendation ITU-T G.997.2 (2016) Corrigendum 2 ITU-T G-SERIES RECOMMENDATIONS TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS INTERNATIONAL TELEPHONE CONNECTIONS AND CIRCUITS G.100G.199 GENERAL CHARACTERISTICS COMMON TO ALL AN
3、ALOGUE CARRIER-TRANSMISSION SYSTEMS G.200G.299 INDIVIDUAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON METALLIC LINES G.300G.399 GENERAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON RADIO-RELAY OR SATELLITE LINKS AND INTERCONNECTION WITH METALLIC LINES G.400G.449 CO
4、ORDINATION OF RADIOTELEPHONY AND LINE TELEPHONY G.450G.499 TRANSMISSION MEDIA AND OPTICAL SYSTEMS CHARACTERISTICS G.600G.699 DIGITAL TERMINAL EQUIPMENTS G.700G.799 DIGITAL NETWORKS G.800G.899 DIGITAL SECTIONS AND DIGITAL LINE SYSTEM G.900G.999 General G.900G.909 Parameters for optical fibre cable sy
5、stems G.910G.919 Digital sections at hierarchical bit rates based on a bit rate of 2048 kbit/s G.920G.929 Digital line transmission systems on cable at non-hierarchical bit rates G.930G.939 Digital line systems provided by FDM transmission bearers G.940G.949 Digital line systems G.950G.959 Digital s
6、ection and digital transmission systems for customer access to ISDN G.960G.969 Optical fibre submarine cable systems G.970G.979 Optical line systems for local and access networks G.980G.989 Metallic access networks G.990G.999 MULTIMEDIA QUALITY OF SERVICE AND PERFORMANCE GENERIC AND USER-RELATED ASP
7、ECTS G.1000G.1999 TRANSMISSION MEDIA CHARACTERISTICS G.6000G.6999 DATA OVER TRANSPORT GENERIC ASPECTS G.7000G.7999 PACKET OVER TRANSPORT ASPECTS G.8000G.8999 ACCESS NETWORKS G.9000G.9999 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T G.997.2 (2015)/Cor.2 (12/2016)
8、 i Recommendation ITU-T G.997.2 Physical layer management for G.fast transceivers Corrigendum 2 Summary Recommendation ITU-T G.997.2 specifies the physical layer management for fast access to subscriber terminals (G.fast) transmission systems. It specifies managed objects for configuration, fault, s
9、tatus, inventory and performance management. Corrigendum 2: Corrects and clarifies the managed objects used for the test modes Removes conditional default values Aligns valid values of BITSps to Recommendation ITU-T G.9701 Adds profile 106b to the PROFILE object to align with Recommendation ITU-T G.
10、9701. History Edition Recommendation Approval Study Group Unique ID* 1.0 ITU-T G.997.2 2015-05-22 15 11.1002/1000/12375 1.1 ITU-T G.997.2 (2015) Cor. 1 2016-03-29 15 11.1002/1000/12800 1.2 ITU-T G.997.2 (2015) Amd. 1 2016-05-07 15 11.1002/1000/12555 1.3 ITU-T G.997.2 (2015) Amd. 2 2016-07-22 15 11.1
11、002/1000/12799 1.4 ITU-T G.997.2 (2015) Cor. 2 2016-12-22 15 11.1002/1000/13067 Keywords Distribution point unit, DPU, G.fast transceivers, management, performance monitoring. _ * To access the Recommendation, type the URL http:/handle.itu.int/ in the address field of your web browser, followed by t
12、he Recommendations unique ID. For example, http:/handle.itu.int/11.1002/1000/11830-en. ii Rec. ITU-T G.997.2 (2015)/Cor.2 (12/2016) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications, information and communication tech
13、nologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telec
14、ommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some ar
15、eas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized op
16、erating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “sh
17、all“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTSITU draws attention to the possibility that the pr
18、actice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation deve
19、lopment process. As of the date of approval of this Recommendation, ITU had received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent the latest information and are therefore
20、 strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2017 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T G.997.2 (2015)/Cor.2 (12/2016) iii Table of Contents Page
21、1 Scope . 1 2 References . 1 3 Definitions 1 3.1 Terms defined elsewhere 1 3.2 Terms defined in this Recommendation . 2 4 Abbreviations and acronyms 2 5 Management architecture 4 6 Network management protocol . 6 7 Managed objects . 6 7.1 Line configuration objects 19 7.2 Channel configuration objec
22、ts 35 7.3 Data path configuration objects 39 7.4 Line failures 39 7.5 Channel failures 40 7.6 Data path failures 40 7.7 Line performance monitoring objects 40 7.8 Channel performance monitoring objects 45 7.9 Data path performance monitoring objects 46 7.10 Line test, diagnostics and status objects
23、. 46 7.11 Channel test, diagnostics and status objects . 60 7.12 Data path test, diagnostics and status objects . 65 7.13 Inventory objects 65 7.14 Link State related managed objects 68 8 Procedures for performance monitoring functions . 69 8.1 Line transmission states 69 8.2 Threshold reports 70 8.
24、3 Unavailable and available state filters 71 8.4 TR1 filter 71 8.5 TR2 filter 71 8.6 Evaluation of TR1 71 8.7 Evaluation of TR2 71 8.8 Threshold report evaluation during transmission state changes . 72 8.9 Performance history storage in network elements 72 8.10 Register size 72 8.11 Parameter counts
25、 72 iv Rec. ITU-T G.997.2 (2015)/Cor.2 (12/2016) Page 8.12 Date/time-stamping of reports 72 8.13 Inhibiting performance monitoring parameters 73 Annex A to Annex W. 74 Annex X Cross-layer link state objects . 75 X.1 Overview of cross-layer link state objects 75 X.2 Cross-Layer Low power Mode Control
26、 . 75 Appendix I Broadband Forum considerations on the FTTdp deployment scenario . 80 Bibliography. 81 Rec. ITU-T G.997.2 (2015)/Cor.2 (12/2016) 1 Recommendation ITU-T G.997.2 Physical layer management for G.fast transceivers Corrigendum 2 Editorial note: This is a complete-text publication. Modific
27、ations introduced by this corrigendum are shown in revision marks relative to Recommendation ITU-T G.997.2 (2015) plus its Cor.1 (2016), Amd. 1 (2016) and Amd.2 (2016). 1 Scope This Recommendation specifies the physical layer management for fast access to subscriber terminals (G.fast) transmission s
28、ystems. It specifies managed objects for configuration, fault, status, inventory and performance management. The list of managed objects applies at the distribution point unit-Northbound (DPU-NB) interface, relating to the “DPU-MIB“ nomenclature used in ITU-T G.9701. The managed objects are defined
29、to provide, at least, all the information necessary for translation into a YANG data model b-IETF RFC 6020, although this does not exclude translation to other formats such as an abstract syntax notation one (ASN.1) (ITU-T X.680 series) management information base (MIB) description used in connectio
30、n with the simple network management protocol (SNMP) b-IETF RFC 1157. The definition of the YANG data model for G.fast-managed objects is outside the scope of this Recommendation. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in thi
31、s text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edit
32、ion of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T G.994.1 Recommendation I
33、TU-T G.994.1 (2012), Handshake procedures for digital subscriber line transceivers. ITU-T G.9700 Recommendation ITU-T G.9700 (2014), Fast access to subscriber terminals (G.fast) Power spectral density specification. ITU-T G.9701 Recommendation ITU-T G.9701 (2014), Fast access to subscriber terminals
34、 (G.fast) Physical layer specification. 3 Definitions 3.1 Terms defined elsewhere This Recommendation uses the following terms defined elsewhere: 3.1.1 managed resource b-ITU-T M.3010: The abstraction of those aspects of a telecommunication resource (logical or physical) required for telecommunicati
35、ons management. 2 Rec. ITU-T G.997.2 (2015)/Cor.2 (12/2016) 3.2 Terms defined in this Recommendation This Recommendation defines the following terms: 3.2.1 AdminStatus: (Based on clause 12.1.1.7 of ITU-T G.9701) The AdminStatus represents the configured, desired state of the interface. The AdminStat
36、us “up“ is equivalent with the interface “enabled=true“, where the desired link state is L0, L2.1N, L2.1B, or L2.2. The AdminStatus “down“ is equivalent with the interface “enabled=false“, where the desired link state is L3. NOTE The relation between the AdminStatus (“up“ or “down“) and the interfac
37、e (enabled=“true“ or “false“) is defined in the IETF YANG Data Model for Interface Management b-IETF RFC 7223. 3.2.2 anomaly: A discrepancy between the actual and desired characteristics of an item. The desired characteristic may be expressed in the form of a specification. An anomaly may or may not
38、 affect the ability of an item to perform a required function. 3.2.3 defect: A limited interruption in the ability of an item to perform a required function. It may or may not lead to maintenance action depending on the results of additional analysis. Successive anomalies causing a decrease in the a
39、bility of an item to perform a required function are considered a defect. 3.2.4 empty array: An array whose number of elements is zero. 3.2.5 failure: A termination of the ability of an item to perform a required function. NOTE After failure, the item has a fault. Analysis of successive anomalies or
40、 defects affecting the same item can lead to the item being considered as “failed“. 3.2.6 managed object: The management view of a managed resource. 3.2.7 DPU-NB interface: The interface between the persistent management agent and the management entity of the distribution point unit. 4 Abbreviations
41、 and acronyms This Recommendation uses the following abbreviations and acronyms: ASN.1 Abstract Syntax Notation one CV Code Violation CV-C Code Violation Channel DPU Distribution Point Unit DPU-NB DPU Northbound DRA Dynamic Resource Allocation ES Errored Second FAST Fast Access to Subscriber Termina
42、ls FE Far-End FRA Fast Rate Adaptation FTTdp Fibre To The distribution point FTTx Fibre To The x FTU FAST Transceiver Unit FTU-O FAST Transceiver Unit Central office end (i.e., network operator end of the loop) FTU-R FAST Transceiver Unit Remote side (i.e., subscriber end of the loop) Rec. ITU-T G.9
43、97.2 (2015)/Cor.2 (12/2016) 3 GDR Gamma Data Rate G.fast fast access to subscriber terminals LOM Loss of Margin LOM-FE Far-End Loss of Margin LOR Loss of RMC LOR-FE Far-End Loss of RMC LORS LOR Second LOS Loss of Signal LOS-FE Far-End Loss of Signal LOSS LOS Second LPR Loss of Power LPR-FE Far-End L
44、oss of Power MIB Management Information Base MDU Multi-Dwelling Unit ME Management Entity NDR Net Data Rate NDRds downstream Net Data Rate NDRus upstream Net Data Rate NE Network Element NMS Network Management System NT Network Termination OLR On-Line Reconfiguration OSS Operations Support Systems P
45、M Performance Monitoring PMA Persistent Management Agent PMD Physical Media Dependent PMS-TC Physical Media Specific Transmission Convergence PSD Power Spectral Density REIN Repetitive Electrical Impulse Noise RMC Robust Management Channel RPA RMC Parameter Adjustment SES Severely Errored Second SNM
46、P Simple Network Management Protocol SNR Signal-to-Noise Ratio SRA Seamless Rate Adaptation TDD Time Division Multiplexing TPS-TC Transport Protocol Specific Transmission Convergence 4 Rec. ITU-T G.997.2 (2015)/Cor.2 (12/2016) TR Threshold Report UAS UnAvailable Second U-O Loop interface Central off
47、ice end U-R Loop interface Remote side (i.e., subscriber end of the loop) 5 Management architecture The management of an access node (AN) or a distribution point unit (DPU) is performed by the network management system (NMS), passing management information over the Q reference point to each ANs mana
48、gement entity (ME) (see Figure 5-1a) or through a persistent management gent (PMA) to the each DPUs ME (see Figure 5-1b). The NMS may also monitor each G.fast transceiver unit remote side (FTU-R) via the related network terminations (NTs) ME and G reference point. The connection between the ME funct
49、ions at the AN or DPU and at the NT is established over management channels provided by the G.fast transceiver unit central office ends (FTU-Os) and FTU-Rs via the copper pairs. Figure 5-1a Reference model of traditional AN deployment (shown for line 1 in all N lines (N1) connected to an AN) Figure 5-1b Reference model of FTTdp deployment with PMA and DPU (shown for line 1 in all N lines (N=1) connected to a DPU) Rec. ITU-T G.997.2 (2015)/Cor.2
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1