ITU-T H 248 14-2009 Gateway control protocol Inactivity timer package (Study Group 16)《网关控制协议 不活动定时器 16号研究组》.pdf

1、 International Telecommunication Union ITU-T H.248.14TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (03/2009) SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMSInfrastructure of audiovisual services Communication procedures Gateway control protocol: Inactivity timer package Recommendation ITU-T H.248.14

2、ITU-T H-SERIES RECOMMENDATIONS AUDIOVISUAL AND MULTIMEDIA SYSTEMS CHARACTERISTICS OF VISUAL TELEPHONE SYSTEMS H.100H.199 INFRASTRUCTURE OF AUDIOVISUAL SERVICES General H.200H.219 Transmission multiplexing and synchronization H.220H.229 Systems aspects H.230H.239 Communication procedures H.240H.259 C

3、oding of moving video H.260H.279 Related systems aspects H.280H.299 Systems and terminal equipment for audiovisual services H.300H.349 Directory services architecture for audiovisual and multimedia services H.350H.359 Quality of service architecture for audiovisual and multimedia services H.360H.369

4、 Supplementary services for multimedia H.450H.499 MOBILITY AND COLLABORATION PROCEDURES Overview of Mobility and Collaboration, definitions, protocols and procedures H.500H.509 Mobility for H-Series multimedia systems and services H.510H.519 Mobile multimedia collaboration applications and services

5、H.520H.529 Security for mobile multimedia systems and services H.530H.539 Security for mobile multimedia collaboration applications and services H.540H.549 Mobility interworking procedures H.550H.559Mobile multimedia collaboration inter-working procedures H.560H.569 BROADBAND, TRIPLE-PLAY AND ADVANC

6、ED MULTIMEDIA SERVICES Broadband multimedia services over VDSL H.610H.619 Advanced multimedia services and applications H.620H.629 IPTV MULTIMEDIA SERVICES AND APPLICATIONS FOR IPTV General aspects H.700H.719 IPTV terminal devices H.720H.729 IPTV middleware H.730H.739 IPTV application event handling

7、 H.740H.749 IPTV metadata H.750H.759 IPTV multimedia application frameworks H.760H.769 IPTV service discovery up to consumption H.770H.779 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T H.248.14 (03/2009) i Recommendation ITU-T H.248.14 Gateway control protocol: I

8、nactivity timer package Summary Recommendation ITU-T H.248.14 provides a package that allows a media gateway to detect the failure of its active media gateway controller through message inactivity. This revision provides the following clarifications for the inactivity timer package version 1: the ev

9、ent inactivity timeout (ito) may be provisioned; the event parameter maximum inactivity time (mit) is an optional element; the event parameter maximum inactivity time (mit) has a default value, which may be provisioned. This revision also provides an example setting for the inactivity timer. Source

10、Recommendation ITU-T H.248.14 was approved on 16 March 2009 by ITU-T Study Group 16 (2009-2012) under Recommendation ITU-T A.8 procedures. ii Rec. ITU-T H.248.14 (03/2009) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunicat

11、ions, information and communication technologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunicatio

12、ns on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure la

13、id down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunic

14、ation administration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure e.g. interoperability or applicability) and compliance with the Recommendation is achieved when all of these manda

15、tory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTS ITU draws a

16、ttention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or ot

17、hers outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent t

18、he latest information and are therefore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2009 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T H.248.14 (03/2009)

19、iii CONTENTS Page 1 Scope 1 2 References. 1 3 Definitions 1 3.1 Terms defined elsewhere 1 3.2 Terms defined in this Recommendation. 1 4 Abbreviations and acronyms 1 5 Conventions 2 6 Inactivity timer package . 2 6.1 Properties 2 6.2 Events . 2 6.3 Signals 2 6.4 Statistics 3 6.5 Error codes 3 6.6 Pro

20、cedures 3 Rec. ITU-T H.248.14 (03/2009) 1 Recommendation ITU-T H.248.14 Gateway control protocol: Inactivity timer package 1 Scope This package contains an event that can be implemented by a media gateway controller (MGC) and by a media gateway (MG) on its root termination. The purpose of the event

21、is to allow the MG to detect periods of silence of H.248 messaging from the MGC. Once the period of silence exceeds the threshold provided in the event, the MGC is notified. This package allows MGs to: 1) detect MGC failure; or/and 2) detect failures or short-term interruptions of the H.248 transpor

22、t connection (see also Note 1 in clause F.3.6 of ITU-T H.248.1) through H.248 message silence. This revision provides the following clarifications for the inactivity timer package version 1: the event inactivity timeout (ito) may be provisioned; the event parameter maximum inactivity time (mit) is a

23、n optional element; the event parameter maximum inactivity time (mit) has a default value, which may be provisioned. This revision also provides an example setting for the inactivity timer. 2 References The following ITU-T Recommendations and other references contain provisions which, through refere

24、nce in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most r

25、ecent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T H.248.1 Recomm

26、endation ITU-T H.248.1 (2005), Gateway control protocol: Version 3, including its Amendment 1 (2008), Corrections and clarifications. 3 Definitions 3.1 Terms defined elsewhere See ITU-T H.248.1. 3.2 Terms defined in this Recommendation None. 4 Abbreviations and acronyms This Recommendation uses the

27、following abbreviations: ALF Application Level Framing MG Media Gateway 2 Rec. ITU-T H.248.14 (03/2009) MGC Media Gateway Controller 5 Conventions None. 6 Inactivity timer package Package Name: Inactivity timer package Package ID: it (0x0045) Description: This package provides support for MGs detect

28、ing the failure of MGCs by H.248 message silence and is only used on the ROOT termination. Version: 1 Extends: None 6.1 Properties None. 6.2 Events 6.2.1 Inactivity timeout Event Name: Inactivity timeout Event ID: ito (0x0001) Description: Detects that inactivity timer has expired. A mit value of 0

29、disables inactivity timing. 6.2.1.1 EventDescriptor Parameters 6.2.1.1.1 Maximum inactivity time Parameter Name: Maximum inactivity time Parameter ID: mit (0x0001) Description: The mit parameter specifies the period of H.248 messaging silence, which the MG applies to the process of monitoring incomi

30、ng H.248 messages. Whenever the period of silence is exceeded, the MG generates a Notify Request with the it/ito ObservedEvent. Type: Integer (in 10 millisecond steps) Optional: Yes (if default is provisioned) Possible values: 065535 (0, 10 ms, 20 ms, , to 655.35 seconds) Default: Provisioned 6.2.1.

31、2 ObservedEventsDescriptor Parameters None. 6.3 Signals None. Rec. ITU-T H.248.14 (03/2009) 3 6.4 Statistics None. 6.5 Error codes None. 6.6 Procedures 6.6.1 Detection of it package support An MGC that supports this package may detect whether or not an MG supports the package by auditing an MG to de

32、termine the presence of the package. 6.6.2 MGC-polling by MG (using the it package) An MGC may choose to set the inactivity timer event containing the maximum silence period or “maximum inactivity time“ on the ROOT termination. The MGC should then ensure that the time between messages sent to that M

33、G never exceeds this period. The MGC ensures this by sending any message as a test or keep-alive message (such as the empty Audit of ROOT) whenever no other message is needed within the period. 6.6.3 MG-polling by MGC (using the audit mechanism) MGCs may test MGs using a test message (for example, a

34、n AuditValue command with an empty AuditDescriptor) without implementing this package or to test MGs that do not implement the package. 6.6.4 Procedural details for the it package An MG that supports this package and receives the event will monitor incoming messages for periods of silence exceeding

35、the maximum inactivity timer value. On the detection of the silence period, a Notify with the observed event is generated. NOTE The detection of the silence period may be done by starting a timer with the specified timeout that resets to zero on the arrival of each message from MGC and reaches timeo

36、ut only after the indicated inactivity period. Another approach for the MG would be to keep a “message received“ Boolean flag, which should be associated to a normal timer and set to 1 when each message is received. When the timer expires and the Boolean flag is still 0, the MG would send the event

37、Notice; if the Boolean flag is 1, the MG would set the Boolean flag to 0 and restart the timer. If the MGC has failed, the event will not receive a reply. If no reply is received, the MG will consider the MGC to have failed and will follow the procedures of clause 11.5 in ITU-T H.248.1. 6.6.5 Provis

38、ioning of event it/ito The inactivity timeout event should be provisioned in both the MGC and MG in order to minimize H.248 signalling load at MGC restarts in networks where there are large numbers of MGs that implement the inactivity timer package. In addition, such a configuration allows the MG to

39、 detect an MGC failure occurring immediately after the registration process (i.e., before the MGC had a chance to explicitly modify the event). 6.6.5.1 Provisioning example The default value of parameter mit may be aligned with parameters of the ALF (application level framing) procedures when H.248

40、signalling uses IP transport according to Annex D of ITU-T H.248.1. In this case, it is recommended to provision a default value greater than ALF timer T-MAX setting (e.g., mit equal to 110% of T-MAX) in order to suspend possible ito event notifications before timer T-MAX expires. Printed in Switzer

41、land Geneva, 2009 SERIES OF ITU-T RECOMMENDATIONS Series A Organization of the work of ITU-T Series D General tariff principles Series E Overall network operation, telephone service, service operation and human factors Series F Non-telephone telecommunication services Series G Transmission systems a

42、nd media, digital systems and networks Series H Audiovisual and multimedia systems Series I Integrated services digital network Series J Cable networks and transmission of television, sound programme and other multimedia signals Series K Protection against interference Series L Construction, install

43、ation and protection of cables and other elements of outside plant Series M Telecommunication management, including TMN and network maintenance Series N Maintenance: international sound programme and television transmission circuits Series O Specifications of measuring equipment Series P Terminals a

44、nd subjective and objective assessment methods Series Q Switching and signalling Series R Telegraph transmission Series S Telegraph services terminal equipment Series T Terminals for telematic services Series U Telegraph switching Series V Data communication over the telephone network Series X Data networks, open system communications and security Series Y Global information infrastructure, Internet protocol aspects and next-generation networks Series Z Languages and general software aspects for telecommunication systems