1、 International Telecommunication Union ITU-T L.1005TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (02/2014) SERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF CABLES AND OTHER ELEMENTS OF OUTSIDE PLANT Test suites for assessment of the universal charger solution Recommendation ITU-T L.1005 Rec.
2、 ITU-T L.1005 (02/2014) i Recommendation ITU-T L.1005 Test suites for assessment of the universal charger solution Summary Recommendation ITU-T L.1005 considers the creation of specific test suites to assess certain functional aspects of the: energy efficiency, interworking, safety and electromagnet
3、ic compatibility (EMC) of the universal charger solution (UCS). Such testing is required to guarantee a minimum quality level of the UCS in conformance with the target basic configuration of the UCS and charger described in Recommendation ITU-T L.1000. History Edition Recommendation Approval Study G
4、roup Unique ID*1.0 ITU-T L.1005 2014-02-13 5 11.1002/1000/12132 Keywords Conformance, EMC, safety, UCS. _ *To access the Recommendation, type the URL http:/handle.itu.int/ in the address field of your web browser, followed by the Recommendations unique ID. For example, http:/handle.itu.int/11.1002/1
5、000/11830-en. ii Rec. ITU-T L.1005 (02/2014) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications, information and communication technologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanen
6、t organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes
7、 the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards
8、 are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommen
9、dation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are
10、used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intel
11、lectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had not receiv
12、ed notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementers are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/
13、. ITU 2014 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. Rec. ITU-T L.1005 (02/2014) iii Table of Contents Page 1 Scope 1 2 References. 1 3 Definitions 2 3.1 Terms defined elsewhere 2 3.2 Terms defined in thi
14、s Recommendation . 3 4 Abbreviations and acronyms 3 5 ITU-T L.1000 conformance testing 3 6 Conformance testing for safety . 5 7 Conformance testing for EMC 6 8 Conformance testing for resistibility 7 Appendix I Guidance on application of some requirement to UCS . 8 I.1 Clarification of voltage drop
15、caused by the detachable cable 8 I.2 Guidance on common mode noise and switching frequency components . 8 I.3 AC voltage frequency component 8 I.4 Occupied bandwidth . 8 I.5 Maximum amount of slew 8 I.6 Required reliability of receptacles and plugs contained in IEC 62684 9 I.7 Assessment of common m
16、ode noise pulses 9 Bibliography. 13 Rec. ITU-T L.1005 (02/2014) 1 Recommendation ITU-T L.1005 Test suites for assessment of the universal charger solution 1 Scope This Recommendation describes the general test suites applicable to the universal charger solution (UCS) defined in ITU-T L.1000. It esta
17、blishes a test list necessary to assess the UCS with respect to the requirements described in ITU-T L.1000. With regard to electromagnetic compatibility (EMC) and safety aspects, additional requirements to those listed in ITU-T L.1000 shall necessary for a product to be available for use by the gene
18、ral public. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subjec
19、t to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document wi
20、thin this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T K.21 Recommendation ITU-T K.21 (2011), Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents. ITU-T K.44 Recommendation ITU-T K.44 (2012)
21、, Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents Basic Recommendation. ITU-T L.1000 Recommendation ITU-T L.1000 (2011), Universal power adapter and charger solution for mobile terminals and other hand-held ICT devices. EN 50563 CENELEC EN 50563:2011, Ext
22、ernal a.c. d.c. and a.c. a.c. power supplies Determination of no-load power and average efficiency of active modes. ETSI EN 301 489-34 ETSI EN 301 489-34 (2013), Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and servi
23、ces; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones. IEC 60331-23 IEC 60331-23 (1999), Tests for electric cables under fire conditions Circuit integrity Part 23: Procedures and requirements Electric data cables. IEC 60332-1-1 IEC 60332-1-1 (2004), Tests on electric an
24、d optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable Apparatus. IEC 60754-1 IEC 60754-1 (2011), Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content. 2 Rec. IT
25、U-T L.1005 (02/2014) IEC 60754-2 IEC 60754-2 (2011), Test on gases evolved during combustion of materials from cables Part 2: Determination of acidity (by pH measurement) and conductivity. IEC 60950-1 IEC 60950-1 (2005), Information technology equipment Safety Part 1: General requirements. IEC 61000
26、-3-2 IEC 61000-3-2 (2010), Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current up to and including 16 A per phase). IEC 61000-3-3 IEC 61000-3-3 (2013), Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes,
27、voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current up to and including 16 A per phase and not subject to conditional connection. IEC 61000-4-2 IEC 61000-4-2 (2008), Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques E
28、lectrostatic discharge immunity test. IEC 61000-4-3 IEC 61000-4-3 (2010), Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test. IEC 61000-4-4 IEC 61000-4-4 (2012), Electromagnetic compatibility (EMC) Part 4-4:
29、 Testing and measurement techniques Electrical fast transient/burst immunity test. IEC 61000-4-5 IEC 61000-4-5 (2005), Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test. IEC 61000-4-6 IEC 61000-4-6 (2013), Electromagnetic compatibility (EMC) Part 4-
30、6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields. IEC 61000-4-11 IEC 61000-4-11 (2004), Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests
31、. IEC 62430 IEC 62430 (2009), Environmentally conscious design for electrical and electronic products. IEC 62684 IEC 62684 (2011), Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones. IEC CISPR 22 IEC CISPR 22 (2008): Information technolo
32、gy equipment Radio disturbance characteristics Limits and methods of measurement. 3 Definitions 3.1 Terms defined elsewhere This Recommendation uses the following terms defined elsewhere: 3.1.1 charger ITU-T L.1000: A common term used to describe the power adapter for the mobile terminal or other ha
33、nd-held ICT devices used to apply power to the battery. 3.1.2 detachable cable ITU-T L.1000: A detachable cable connects the power adapter to the mobile terminal or other hand-held ICT device for powering through two connectors, one on the charger side and one on the side of the mobile terminal or o
34、ther hand-held ICT device. Rec. ITU-T L.1005 (02/2014) 3 3.1.3 power adapter ITU-T L.1000: The equipment that converts mains AC power voltage at the input to low DC power voltage at the output, or the equipment which transfers DC power supply, e.g., car voltage to another low voltage of DC power out
35、put. 3.1.4 universal charger solution ITU-T L.1000: Overall initiative that defines the charger solution for different mobile terminals and other hand-held ICT devices. 3.2 Terms defined in this Recommendation This Recommendation defines the following term: 3.2.1 test suite: A list of tests necessar
36、y to validate a universal charger solution. 4 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: AC Alternating Current DC Direct Current EMC Electromagnetic Compatibility ESD Electrostatic Discharge LISN Line Impedance Stabilization Network MOU Mutual of u
37、nderstanding RF Radio Frequency UCS Universal Charger Solution USB Universal Serial Bus 5 ITU-T L.1000 conformance testing This part of the Recommendation defines the test to determine whether a universal charger solution (UCS) meets the conformance requirements described in ITU-T L.1000. The need t
38、o establish a common test suite for the UCS is derived from the necessity to establish a common modality to assess product quality and to provide a regulatory guide on which product testing could be based for market surveillance purposes. Table 5-1 provides a list of tests on energy efficiency that
39、are necessary to check conformance of the UCS with requirements described in ITU-T L.1000. Table 5-2 provides a list of DC tests that are necessary to check conformance of the UCS with requirements described in ITU-T L.1000. 4 Rec. ITU-T L.1005 (02/2014) Table 5-1 Test suites for energy efficiency a
40、ssessment Test # Test type Description Requirement Test reference 1. Energy efficiency requirement 1.1. No load No-load power consumption test See clause B.2.1 of ITU-T L.1000 EN 50563 1.2. Energy Efficiency Energy efficiency conversion See clause B.2.3 of ITU-T L.1000 EN 50563 Table 5-2 Test suites
41、 for DC output characteristic evaluation Test # Test type Description Requirement Test reference 2. DC output 2.1. Voltage DC output voltage 5.0 V 5% See clause B.2.3 of ITU-T L.1000 2.2. Current DC output current 750 mA to 1500 See clause B.2.3 of ITU-T L.1000 2.3. USB USB interface conformance USB
42、 Specification V2.0 b-USB Spec USB Battery Charging Specification V1.1 b-USB Battery (minimum output current of 500 mA and maximum output current of 1500 mA) IEC 62684 2.4. Common mode noise Limitation of common mode noise on DC port See section 5.4 of IEC 62684 IEC 62684 2.5. Ripple Limitation of r
43、ipple DC port 80 mV peak-to-peak measured at 20 MHz bandwidth IEC 62684 5 Rec. ITU-T L.1005 (02/2014) 6 Conformance testing for safety This part of the Recommendation defines the test to determine whether a UCS is in conformance with safety requirements. Table 6-1 does not provide an exhaustive list
44、 of applicable tests. The UCS shall be designed in line with IEC 60950-1. Table 6-1 Test suites for assessment of safety conformance Test # Test type Description Requirement Test reference 3. Safety 3.1. General General Safety requirement The power adapter must be a limited power source in accordanc
45、e with section 2.5 of IEC 60950-1 IEC 60950-1 3.2. Fire resistance Risk Ignition reduction and fire propagation of UCS The power adapter construction and functionality shall be in accordance with section 4.7 of IEC 60950-1 IEC 60950-1 3.3. Fire resistance Fire propagation of detachable cable Plastic
46、 material V1 No fire propagation in accordance with IEC 60332-1-1 Fire resistance: see IEC 60331-23 IEC 60332-1 3.4. Fire resistance Fumes Emanation IEC 60754-1 (amount of halogen acid gas) and IEC 60754-2 (acidity of gases evolved during combustion) IEC 60754-1 IEC 60754-2 6 Rec. ITU-T L.1005 (02/2
47、014) 7 Conformance testing for EMC This part of the Recommendation defines the test for a UCS to be in conformance with EMC requirements. Table 7-1 reports the DC test list necessary to check UCS conformance with EMC requirements. Table 7-1 EMC test suites Test # Test type Description Requirement Te
48、st reference 4. Electromagnetic compatibility (EMC) 4.1. Radiated emission Radiated emission from UCS enclosure IEC CISPR 22 class B ETSI EN 301 489-34 IEC CISPR 22 4.2. DC conducted emission Conducted emission on UCS DC line IEC CISPR 22 class B ETSI EN 301 489-34 IEC CISPR 22 4.3. AC conducted emi
49、ssion Conducted emission on UCS AC line IEC CISPR 22 class B ETSI EN 301 489-34 IEC CISPR 22 4.4. Harmonic Limitation of harmonics current The requirements contained in IEC 61000-3-2/A1 relevant to harmonic current emission apply for equipment. IEC 61000-3-2/A1 ETSI EN 301 489-34 4.5. Voltage fluctuations and flicker Voltage fluctuations
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1