ITU-T Q 3231-2016 Signalling requirements and protocol at the Ne interface between the transport location management physical entity and the network access configuration physical e.pdf

1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T Q.3231 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (08/2016) SERIES Q: SWITCHING AND SIGNALLING Signalling requirements and protocols for the NGN Signalling and control requirements and protocols to support attachment i

2、n NGN environments Signalling requirements and protocol at the Ne interface between the transport location management physical entity and the network access configuration physical entity Recommendation ITU-T Q.3231 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATION

3、AL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500

4、Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q

5、.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799 SPECIFICATIONS OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR THE NGN Q.3000Q.3709 General Q.3000Q.3029 Network signalling a

6、nd control functional architecture Q.3030Q.3099 Network data organization within the NGN Q.3100Q.3129 Bearer control signalling Q.3130Q.3179 Signalling and control requirements and protocols to support attachment in NGN environments Q.3200Q.3249 Resource control protocols Q.3300Q.3369 Service and se

7、ssion control protocols Q.3400Q.3499 Service and session control protocols supplementary services Q.3600Q.3616 Service and session control protocols supplementary services based on SIP-IMS Q.3617Q.3639 NGN applications Q.3700Q.3709 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR SDN Q.3710Q.3899 TESTING S

8、PECIFICATIONS Q.3900Q.4099 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T Q.3231 (08/2016) i Recommendation ITU-T Q.3231 Signalling requirements and protocol at the Ne interface between the transport location management physical entity and the network access confi

9、guration physical entity Summary Recommendation ITU-T Q.3231 provides the protocol for the interface between the transport location management physical entity (TLM-PE) and the network access configuration physical entity (NAC-PE) of the network attachment control entity (NACE). The Ne reference poin

10、t allows the network access configuration physical entity to register in the transport location management physical entity the binding between an allocated IP address and a customer premises equipment (CPE) as well as other transport related information such as logical/physical port addresses. Histo

11、ry Edition Recommendation Approval Study Group Unique ID* 1.0 ITU-T Q.3231 2016-08-29 11 11.1002/1000/12986 Keywords Customer premises equipment, CPE, NACE, NAC-PE, Ne interface, network access configuration physical entity, TLM-PE, transport location management physical entity. * To access the Reco

12、mmendation, type the URL http:/handle.itu.int/ in the address field of your web browser, followed by the Recommendations unique ID. For example, http:/handle.itu.int/11.1002/1000/11830-en. ii Rec. ITU-T Q.3231 (08/2016) FOREWORD The International Telecommunication Union (ITU) is the United Nations s

13、pecialized agency in the field of telecommunications, information and communication technologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on th

14、em with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-

15、T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used

16、 for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and compliance with the

17、Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of a

18、ny party. INTELLECTUAL PROPERTY RIGHTSITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Prope

19、rty Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, imp

20、lementers are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2016 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior writ

21、ten permission of ITU. Rec. ITU-T Q.3231 (08/2016) iii Table of Contents Page 1 Scope . 1 2 References . 1 3 Definitions 2 3.1 Terms defined elsewhere 2 3.2 Terms defined in this Recommendation . 2 4 Abbreviations and acronyms 2 5 Conventions 4 6 Ne interface . 4 6.1 Overview 4 6.2 Ne Reference mode

22、l . 4 6.3 Physical entities and capabilities 4 7 Signalling requirements 5 7.1 Bind indication . 6 7.2 Bind acknowledgement 6 7.3 Unbind indication . 7 7.4 Bind information query 7 7.5 Bind information query acknowledgement 7 7.6 Mobility service parameters indication 8 8 Description of procedures .

23、 9 8.1 General . 9 8.2 Procedure on the Ne interface 9 9 Use of Diameter-based protocol . 14 9.1 Securing Diameter messages 14 9.2 Accounting functionality 14 9.3 Use of sessions . 14 9.4 Transport protocol 14 9.5 Routing considerations . 14 9.6 Advertising application support . 15 10 Message specif

24、ication . 15 10.1 Commands 15 10.2 Experimental-Result-Code AVP values . 18 10.3 Attribute value pairs (AVPs) 18 10.4 Use of namespaces . 21 11 Security considerations . 21 Bibliography. 23 Rec. ITU-T Q.3231 (08/2016) 1 Recommendation ITU-T Q.3231 Signalling requirements and protocol at the Ne inter

25、face between the transport location management physical entity and the network access configuration physical entity 1 Scope This Recommendation specifies the protocol for the Ne interface ITU-T Y.2014 between the transport location management physical entity (TLM-PE) and the network access configura

26、tion physical entity (NAC-PE). 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other re

27、ferences are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The referen

28、ce to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T Y.1910 Recommendation ITU-T Y.1910 (2008), IPTV functional architecture. ITU-T Y.2014 Recommendation ITU-T Y.2014 (2010), Network attachment control functions in next genera

29、tion networks. ITU-T Y.2021 Recommendation ITU-T Y.2021 (2006), IMS for Next Generation Networks. ITU-T Y.2701 Recommendation ITU-T Y.2701 (2007), Security requirements for NGN release 1. ITU-T Y.3232 Recommendation ITU-T Y.3232 (2014), Signalling requirements and protocol at the Nc interface betwee

30、n the transport location management physical entity and the transport authentication and authorization physical entity. ETSI ES 283 034 ETSI ES 283 034 V2.2.0 (2008), Telecommunications and Internet converged Services and Protocols for Advanced Networks (TISPAN); Network Attachment Sub-System (NASS)

31、; e4 interface based on the DIAMETER protocol. ETSI ES 283 035 ETSI ES 283 035 V3.1.1 (2015), Network Technologies (NTECH); Network Attachment; e2 interface based on the DIAMETER protocol. ETSI TS 129 229 ETSI TS 129 229 V13.0.0 (2016), Digital cellular telecommunications system (Phase 2+) (GSM); Un

32、iversal Mobile Telecommunications System (UMTS); LTE; Cx and Dx interfaces based on the Diameter protocol; Protocol details (3GPP TS 29.229 version 13.0.0 Release 13). ETSI TS 129 329 ETSI TS 129 329 V12.6.0 (2016), Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunic

33、ations System (UMTS); LTE; Sh interface based on the Diameter protocol; Protocol details (3GPP TS 29.329 version 12.6.0 Release 12). 2 Rec. ITU-T Q.3231 (08/2016) ETSI TS 183 059-1 ETSI TS 183 059-1 V2.1.1 (2009), Telecommunications and Internet converged Services and Protocols for Advanced Networki

34、ng (TISPAN); Network Attachment Sub-System (NASS); a2 interface based on the DIAMETER protocol. IETF RFC 4960 IETF RFC 4960 (2007), Stream Control Transmission Protocol. IETF RFC 5580 IETF RFC 5580 (2009), Carrying Location Objects in RADIUS and Diameter. IETF RFC 6733 IETF RFC 6733 (2012), Diameter

35、 Base Protocol. 3 Definitions 3.1 Terms defined elsewhere This Recommendation uses the following terms defined elsewhere: 3.1.1 authentication ITU-T Y.2014: A property by which the correct identifier of an entity or party is established with a required assurance. The party being authenticated could

36、be a user, subscriber, home environment or serving network. 3.1.2 location information b-ITU-T Q.1001: The location register should as a minimum contain the following information about a mobile station: international mobile station identity; actual location of the mobile station (e.g., PLMN, MSC are

37、a, location area, as required). 3.2 Terms defined in this Recommendation None. 4 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: ABNF Augmented Backus-Naur Form AM-PE Access Management Physical Entity AR-PE Access Relay Physical Entity ATM Asynchronous T

38、ransfer Mode AVP Attribute-Value Pair CPE Customer Premises Equipment DHCP Dynamic Host Configuration Protocol DNS Domain Name Service FQDN Fully Qualified Domain Name GTP GPRS Tunnelling Protocol HDC-PE Handover Decision and Control Physical Entity HGW Home Gateway HGWC-PE Home Gateway Configuratio

39、n Physical Entity ID Identifier IMS IP multimedia Subsystem Rec. ITU-T Q.3231 (08/2016) 3 IP Internet Protocol IPsec IP security protocol IPTV Internet Protocol Television MIP Mobile IP MLM-PE Mobile Location Management Physical Entity MMCE Mobility Management Control Entity MPLS Multi-Protocol Labe

40、l Switching MSC Mobile Switching Center NACE Network Attachment Control Entity NACF Network Attachment Control Functions NAC-PE Network Access Configuration Physical Entity NID-PE Network Information Distribution Physical Entity NIR-PE Network Information Repository Physical Entity P-CSC-PE Proxy Ca

41、ll Session Control Physical Entity PD-PE Policy Decision Physical Entity PIA Persistent IP address PLMN Public Land Mobile Network PPP Point-to-Point Protocol RACE Resource Admission and Control Entity SADS Service and Application Discovery and Selection SCE Service Control Entity SCTP Stream Contro

42、l Transmission Protocol TAA-PE Transport Authentication and Authorization Physical Entity TE Terminal Equipment TFTP Trivial File Transfer Protocol TIA Temporary IP address TLM-PE Transport Location Management Physical Entity TRC-PE Transport Resource Control Physical Entity TUP-PE Transport User Pr

43、ofile Physical Entity UE User Equipment VC Virtual Channel VCI Virtual Channel Identifier VP Virtual Path VPI Virtual Path Identifier VPN Virtual Private Network 4 Rec. ITU-T Q.3231 (08/2016) 5 Conventions None. 6 Ne interface 6.1 Overview The Ne reference point allows the NAC-PE to register in the

44、TLM-PE the binding between an allocated IP address and a CPE as well as other transport related information, such as logical/physical port addresses. The following information flows are used on the TLM-PE to NAC-PE reference point: Bind indication; Bind acknowledgement; Unbind indication; Bind infor

45、mation query; Bind information query acknowledgement; Mobility service parameters indication. 6.2 Ne Reference model This clause describes the reference architecture. As the initial architecture, Figure 6-1 can be used: Figure 6-1 Ne reference model ITU-T Y.2014 6.3 Physical entities and capabilitie

46、s 6.3.1 Transport location management physical entity (TLM-PE) TLM-PE responds to location queries from service control functions and applications. The actual information delivered by TLM-PE may take various forms (network location, geographical coordinates, postal address, etc.) depending on the ag

47、reement with the requester and on user preferences regarding the privacy of its location. The TLM-PE may play several roles, i.e. the Home role, the Local role, or both. In its Home role the TLM-PE stores a pointer to the TLM-PE instance that is playing the Local role for the attachment. The current

48、 location information of the user/CPE in the access domain is stored and bound in the Local TLM-PE. So when the user/CPE moves in the same access domain, only the location binding Rec. ITU-T Q.3231 (08/2016) 5 information of the Local TLM-PE needs to be updated; the location binding information of t

49、he Home TLM-PE does not need to be updated. The Local TLM-PE is in the access network to which the terminal equipment is attached. The Home TLM-PE is in the network designated by the Transport User Profile Physical Entity. Where these networks differ, communication between the Local and Home TLM-PE instances takes place over the Ng reference point. Namely, the home TLM-PE may provide the SCE with user network profile information through the local TLM-PE of visit network to sup